Remington 700ML Instruction Manual

6. Insert the bore cleaning tube into the receiver and against the breech plug threads. Do not thread this tube
into the barrel.
7. Attach a bore mop to the ramrod with the extension and handle assembled and insert it through the bore
cleaning tube and into the barrel.
8. Place the muzzle in clean, hot water and pull the bore mop back through the barrel into the bore cleaning
tube. This action will pull clean water through the bore and breech plug threads. 
9. Repeat step 8 several times swabbing the...

To Clean the Bolt Assembly
TO DISASSEMBLE THE BOLT ASSEMBLY:
1. Remove the bolt assembly from the firearm. See page 10.
2. Pull the bolt assembly away from the firing pin assembly by hooking
the notch on the firing pin head over a metal edge and pulling. See
Picture 22. Insert a coin into the slot that will become visible in the
side of the firing pin head.
3. Holding the bolt assembly, unscrew the firing pin assembly and slide it out of the bolt body.
CAUTION:Clean the firing pin assembly as a unit. No...

23
How to Obtain Parts and Service From Remington.®
TO ORDER PARTS:
Many Remington®Dealersand Authorized Repair Centers carry a full line of parts. Please check with them first
before ordering parts.
To expedite your PARTSorder or request REPAIR SERVICE visit our web site at www.remington.com. Detailed
instructions are provided along with parts and/or service order forms. You may also reach Remington by calling
our toll free customer service number, 1-800-243-9700, Mon.-Fri., 9:00 AM-5:00 PM Eastern...

24
MODEL 700™ML/MLS
In-Line Bolt Action Muzzleloading Rifle 

25
1 Barrel Assembly 
2 Bolt Assembly
3 Bolt Plug
4 Bolt Stop/Cam Follower Screw
5 Bolt Stop Pin (Restricted)
6 Breech Plug
7 Center Guard Screw
8 Firing Pin Cross Pin
9 Front Guard Screw
10 Front Guard Screw Bushing
11 Front Sight
12 Front Sight Ramp
13 Front Sight Ramp Screw
14 Front Swivel Screw
15 Mainspring
16 Nipple
17 Ramrod
18 Ramrod Spring
19 Ramrod Spring Screw
20 Ramrod Spring Screw Washer
21 Ramrod Support
22 Ramrod Support Screw
23 Rear Guard Screw
24 Rear Sight Aperture
25 Rear Sight Base...

26
Model _________________ Serial # ________________  Date Purchased ______________
Purchased From ___________________________ Price Paid _________________________
Remember to complete and return the Firearm Warranty Registration Card in order to 
obtain full benefit of your Limited Two Year Firearm Warranty.
A WORD ON THE MAINTENANCE AND CARE OF YOUR REMINGTON FIREARM
Don’t Alter or Modify Your Gun and Have it Serviced Regularly.
Your firearm hasbeen designed to operate according to certain factory...

27
DATE SERVICE PERFORMED PERFORMED BY
Firearm Maintenance Record 

Printed in U.S.A. Remington is a trademark registered in the United States Patent 
and Trademark Office by Remington Arms Company, Inc.
Form RD 7059  Rev. Orig. 6 01