RCA Rlded3258ae Manual

							 
   
If You Have Digital Cable without Cable Box or Antenna…   
 
 
 
 
 
 
Connection Suggestions
 
1.Make sure the power of HDTV is turned off. 
2.Connect the  RF cable from your antenna  or digital cable to the TV port on the 
back of your HDTV. 
3.Turn on the HDTV. 
4.Follow the first time on screen instructions. 
Not all broadcasts are in High Definition (HD).    Please refer to your local 
broadcasting stations for more information. 
The HDTV’s tuner is designed for HDTV therefore requires a stronger signal than 
normal TVs.    If you cannot achieve that signal level with your antenna or cable, your 
HDTV might lose picture or sound. 
 
 
Please Note:  
10
or 
						

							 
Connecting DVD Player with Component YPbPr… 
 
 
 
1. Make sure the power of HDTV and your DVD player is turned off. 
2. Obtain a Component Cable. Connect the green color connector to both your DVD 
player and YPbPr’s green connector port on the back of your HDTV. 
3. Connect the blue color connector to both your DVD player and YPbPr’s blue 
connector port on the back of your HDTV. 
 
4. Connect the red color connector to both your DVD player and YPbPr’s red connector 
port on the back of your HDTV. 
5. Obtain a RCA Audio Cable.    Connect the white color connector to both your DVD 
player and YPbPr’s white connector port on the back of your HDTV. 
6. Connect the red color connector to both your DVD player and YPbPr’s red connector 
port on the back of your HDTV. 
7. Turn on the HDTV and your DVD player. 
8. Use the remote control’s source button or the source button on the TV to switch to 
YPbPr.   
Please Note :   
Sometimes DVD players will not automatically output to YPbPr.    You will 
need to configure your DVD player with AV connection first then switch to 
YPbPr.    Please reference the DVD player’s manual, to make sure the DVD 
player is configured to output correctly to the TV. 
This source shares audio jacks with composite video. 
11 
						

							 
Connecting Wii™ with Composite… 
 
   
 
1.Make sure the power of HDTV and your Wii™ is turned off. 
2.Obtain a Yellow Video Cable. Connect the Yellow Video connector to both your Wii™ 
and AV’s Yellow Video connector port on the back side of your HDTV. 
3.Obtain a RCA Audio Cable.    Connect the white color connector to both your Wii™ 
and AV’s white connector port on the back side of your HDTV. 
4.Connect the red color connector to both your Wii™ and AV’s red connector port on the 
back side of your HDTV. 
5.Turn on the HDTV and your Wii™. 
6.Use the remote control’s source button or the source button on the TV to switch to AV. 
 
Please Note:   
Make sure to read your Wii™ installation guide for further information. 
This source shares audio jacks with YPbPr. 
12 
						

							 
Connecting Cable or Satellite boxes with HDMI… 
 
 
 
1. Make sure the power of HDTV and your set-top box is turned off. 
2. Connect a HDMI cable to the HDMI output of your set-top box and the other end to 
the HDMI port on the back of your HDTV. 
3. Turn on the HDTV and your set-top box. 
4. Use the remote control’s source button or the source button on the TV to switch to 
HDMI. 
 
Please Note:   
Please reference the set-top box’s manual, to make sure the set-top box is 
configured to output correctly to the TV. 
HDTV supports NEC’s universal remote code. Please look up NEC’s 
codes in your universal remote’s hand book. 
 
 
13 
						

							 
 
 
 
 
1. Make sure the power of HDTV and your PC is turned off. 
2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the other 
end to the VGA port on the back of your HDTV. 
3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end to the 
VGA Stereo Input port. 
4. Turn on the power of the HDTV and your PC. 
5. Use the remote control’s source button or the source button on the TV to switch to PC. 
6. Change your PC resolution to 1360x768 at 60hz refresh rate. 
7. Press MENU to use the OSD’s PICTURE option.   
8. Under the PICTURE option select PC Settings. 
9. Under PC Settings use AUTO ADJUST to adjust the screen. 
 
Please Note:   
For the best results, please set your PC resolution to 1360x768 at 60 Hz.    Please 
refer to the PC or graphic card’s manual for further instructions on how to set your 
resolution and refresh rate. 
Please refer to your PC manual for video output requirements of the video card. 
The VGA port of the TV features a power saving mode which will automatically 
turn off the TV, if there’s no signal provided for more than 5 minutes. 
14
Connecting to a PC with VGA and 3.5 mm minijack …  
						

							 
Connecting a Digital Audio Receiver with Coaxial...
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1.Make sure the power of HDTV and your receiver is turned off. 
2.Obtain a  COAXIAL cable, connect it  to your receiver’s  COAXIAL digital 
input and the  COAXIAL connection on the LINE OUT port on the back of the 
HDTV. 
3.Turn on the HDTV and your receiver. 
 
Please Note:   
If you want pure digital stream for your receiver to decode, you must also 
configure the TV’s OSD Sound->Digital Audio Out function. Make sure the 
option is on 5.1CH. 
If your receiver is making static noises when receiving 5.1CH, you must use 
the PCM option instead. 
Please reference the receiver’s manual as well, to make sure the receiver is 
configured to receive signals correctly from the TV. 
The TV’s COAXIAL out for 5.1CH is ONLY used for antenna/cable 
connection.    Any other incoming audio signal will be passed out of 
COAXIAL in PCM format. 
15 
						

							 
 
Main unit description 
Control Panel Button Function 
TV Terminal Connections 
 
   
1.HEADPHONE out terminal. 
2. Line out terminal. 
3. Coaxial out terminal. 
4. AUDIO  input  terminal.ÄAudio input terminal for YPBPR and    AVÅ 
5. Component input terminal.ÄOR Video input terminalÅ 
6. HDMI1 input terminal. 
7. HDMI2 input terminal. 
8. HDMI3 input terminal 
9. VGA input terminal of simulation signal of PC. 
10. PC AUDIO input terminal. 
11. RF antenna. 
12. USB input terminalÄOnly be used to upgradeÅ. 
 
 
 
 
 
 
16
 
 
 
VOL+ : Increase volume; if OSD is active, functions as right in the menu; 
in SOURCE menu, functions as ENTER.
VOL- :  Decrease volume; if OSD is active, functions as left in the menu.
CH+  :   Change channel up; if OSD is active, functions as up in the menu 
CH-  : 
MENU : Press to select the main menu. 
SOURCE : Select the input signal. 
POWER : Switch on when at standby mode or enter the standby mode. 
 Change channel down; if OSD is active, functions as down in 
 the menu. 
						

							Remote control 
POWER: Pow
er on/
off bu
tt
on, press once to turn the TV on and press   
again to turn the TV off.   
MUTE: Press this button to mute or restore sound. 
MTS/AUDIO: When stereo program is received, press this key to   
switch sound system between mono and stereo.   
When SAP program is received, press this button to switch sound   
system between mono and SAP   
When stereo and SAP program is received, press this key to switch   
among mono, stereo and SAP. 
Press this key to show the list of audio languages available for the 
current channel in ATSC. 
ASPECT: Press to 
adjust picture ratio. 
PMODE: Select picture mode.
SMODE: Select sound mode.   
0-9: Select and switch to a channel using 0 - 9. 
-/--:
Switch the program digit. 
: Switch back and front between the current and previous channels.   
DISPLAY: Display TV information.   
EPGÖEnter electronic program guide 
AUTO: Adjust the picture automatically in pc mode. 
RED, GREEN, YELLOW, CYAN:
This
 button is not available.
SLEEP: Se
t th
e slee
p ti
mer.
SOURCE: Press to change signal source.
ENTER: Enter the selected option or perform the selected operation. 
MENU: Press this button to enter the main menu.   
EXIT: Exit the OSD (On-screen display). 
CH+/CH-: Change the channel.   
CC: Press this key to select the CC ,ON or OFF mode and CC on Mute . 
INFO: Display some information of current program in TV mode. 
VOL+/VOL-: Adjust the volume. 
FAV: Switch between custom set "Favorite List"   
F.LIST: Press this key to display the Favorite List mode. 
C.LIST: Press this key to display the channel list mode. 
 
						

							Installation Guide 
PressMENUbut
toMAIN OSD MENU; / button to se
MENU you want; Press ENTER button to enter the s /  button 
option and then press  /  the sub mMENUbutt
go bacEXIT button to 
PICTURE
Y
ou c
button 
press 
						

							a.Press