RadioShack Pro 95 Handheld Scanner Owners Manual
Here you can view all the pages of manual RadioShack Pro 95 Handheld Scanner Owners Manual. The RadioShack manuals for Communications receiver are available online for free. You can easily download all the documents as PDF.
Page 81
Frequency Conversion 81 To convert from kHz to MHz, divide the number of kilohertz by 1,000: 127.800 (kHz) / 1,000 = 127.8 MHz To convert MHz to meters, divide 300 by the number of megahertz: 300/50 MHz = 6 meters
Page 82
Troubleshooting 82 TROUBLESHOOTING ProblemPossible CauseRemedy Scanner is totally inoperative.The AC or DC adapter is not connected.Be sure the adapters barrel plug is fully inserted into thePWR DC 9Vjack. Batteries have failed Recharge the rechargeable batteries or replace the stan- dard batteries Poor or no reception.An antenna is not connected or is connected incorrectly.Be sure an antenna is properly connected to the scanner. Programmed frequencies are the same as “birdie” frequencies.Avoid...
Page 83
Resetting/Initializing the Scanner 83 RESETTING/ INITIALIZING THE SCANNER If the scanners display locks up or does not work properly after you connect a power source, you might need to reset or initialize it. ! RESETTING THE SCANNER 1. Turn off the scanner, then turn it on again. 2. Insert a pointed object, such as a straightened paper clip, into the reset opening on the side of the scanner. Then gently press and release the reset button inside the opening. Pressing the reset button does not clear the...
Page 84
Care 84 CARE Keep the scanner dry; if it gets wet, wipe it dry immediately. Use and store the scanner only in normal temperature environments. Handle the scanner carefully; do not drop it. Keep the scanner away fromdustanddirt,andwipeitwith a damp cloth occasionally to keep it looking new. Modifying or tampering with the scanner’s internal components can cause a malfunction and might invalidate its warranty and void your FCC authorization to operate it. If your scanner is not performing as it should,...
Page 85
Specifications 85 ID memory banks............................ 10 Sub-banks per bank.......................... 5 Number of memory IDs per sub-bank ........................................................ 20 Sensitivity (20 dB S/N): FM: 25–54 MHz .............................. 0.3µV 108 –136.9875 MHz ................. 0.3µV 137–174 MHz ........................... 0.5µV 216–225 MHz ........................... 0.5µV 406–512 MHz ........................... 0.5µV 806–960 MHz ........................... 0.7µV...
Page 86
Specifications 86 Intermediate Frequencies (IF): 1st .................................... 380.8 MHz 2nd ...................................... 21.4 MHz 3rd .......................................... 455 kHz Priority Sampling ................. 2 seconds Operating Temperature ... -14 to 140° F (-10 to 60° C) IF Rejection 380.8 MHz at 154.1 MHz ........ 60 dB 21.4 MHz at 154.1 MHz ........ 100 dB Squelch Sensitivity: Threshold (FM and AM) ............ 0.5µV Tight (FM) ................................. 25...
Page 87
Parts and Accessories 87 PARTS AND ACCESSORIES Parts and accessories are available at your local RadioShack store. Accessories are also available online at www.radioshack.com. Parts and accessories are available but not limited to the following. Visit your local RadioShack store or obtain a RadioShack catalog for a more complete listing of available accessories. RG-8/RG-58 50-Ohm Coaxial Cable Use to connect your scanner to an external antenna. External Antenna Connect to your scanner’s external...
Page 88
Parts and Accessories 88 Connecting Cable Use to connect your scanner to another scanner so you can transfer data between them. 9V, 300 mA AC Adapter Use to connect your scanner to AC power. DUAL TRUNKING 1000 CHANNELS PC Interface Cable Use to connect your scanner to a PC so you can transfer data between them.