Quasar Combination Vcr Vv 1301 Operating Instructions
Have a look at the manual Quasar Combination Vcr Vv 1301 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 140 Quasar manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21
TV Operation
1
2
4
6
5
3
7
Press ACTION three times to return to
the normal screen.
NOCAP C1
CAP C2
M A I N MENU
T VVCR
EX I T
CLOCKC H
LANGUAGE
SET : ACT I ON SELECT :
Caption On Mute Feature
Closed Caption narration, if available, is displayed
when MUTE button is pressed for silence.
Press ACTION to display MAIN MENU.
1)Press
to
select “TV.”
2)Press ACTION to
display SET UP TV
screen.
1)Press
to
select “CAPTION”.
2)Press
to display
CAPTION screen.
1)Press
to
select CAPTION
MODE.
2)Press
repeatedly to
select “OFF.”
1)Press
to select
CC ON MUTE.
2)Press repeatedly
to select desired
mode.
Each press of will
change the display as
shown left.
The caption may be
broadcast over CAP C1
or C2.
Press MUTE to mute the sound and
display closed captioning.
To cancel, press MUTE again.
CAPT I ONCACAPTPT I ON MODEMODE : OFFOFFCC ON MUTE : CAP C1
SET : SELECT : END : ACT I ON
LOCK
CACAPTPT I ON N I NPUT SELECT : TUNERV I DEO ADJUST
SELE
CT : SET :
END : ACT I ON
SET UP TV
SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN
MUTE
ACTION
VV13F1 P12-21 Basic-TV.p65 01/09/19, 10:4621
22For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] Press PROG (or ACTION) to end the program. To Enter More Programs, press to select and to set a blank program number, and then repeat step 3. 4 CANCEL : ADD / DLT SELECT 1 - 8 : ENTER : END : PROG / ACT I ON P DT START STOP CH SPD 1 dayday 9 : 0000 p 1212 : 0000a 0808 SP SP2 -- -- : -- -- : -- -- --3 -- -- : -- -- : -- -- --4 -- -- : -- -- : -- -- -- Press PROG twice (or ACTION) to exit this mode. If you’re using a cable box, make sure that it is tuned to the desired channel and the power is left on for timer recording. PROG TIMER indicator lights on the unit.5 Timer Recording You can set up to 8 programs to be recorded while you are away. 1 2 3 Ready Check List All connections are made. Your unit is plugged in. The clock is set to correct time. The tape is long enough. The record tab is in place. SESELE CT START START DATATE 7 FR I --:-- --:-- --TODAYCATEGORY : N / A DATE START ST OPCH SLP SELE CT : SET : END : PROG / ACT I ON - - - - - - - - -- - - - - - - -- - - - - - - You can set a Timer Recording using ACTION key on the unit. (See page 13.) Press PROG to display SET PROGRAM screen. 1)Press to selectTIMER PROGRAMMING. 2)Press to display screen. If a program is already in memory, press , and to select an unused program number. Press to select and or to set the recording DATE. 1~31 = One time DAILY = MON~FRI WEEKLY SUN~SAT = Same time once a week Repeat step 3 to set: start time, stop time Channel (or LINE for outside source) Category [N/A (not applicable), SPORTS, MOVIE, COMEDY, MUSIC, DRAMA] Speed (SP, LP, SLP) Timer Recording Using unit Buttons 1Press STOP/EJECT and REW together without a tape inserted to display MAIN MENU. 2Press + - to select “VCR” and STOP/EJECT and REW together to display SET UP VCR screen. 3Press to select “TIMER PROGRAM” and + to display the TIMER PROGRAM screen. 4Repeat main steps 3 ~ 5. Today’s Date Example DAILY72 1 31 68 9 SELECT / Selection Order WEEKLY (SAT)WEEKLY (MON)WEEKLY (SUN) PROG TIMER indicator SET : SELECT : END : PROG SET PROGRAM ON TIMERON TIMERT I MER PRT I MER PROGRAMMINGOGRAMMING VIDEO IN AUDIO INPOWER VOLCHSTOP/EJECT REW/ PLAY/REPEATFF/RECTIMERACTIONREC ON TIMERPROG TIMER VOLCHSTOP/EJECTSTOP/EJECTREW/REW/ ACTIONACTION VV13F1 P22-31Timer-Advanced.p65 01/09/19, 10:4922
Timer Operation 23 Repeat steps 1 and 2 on page 22.1 CANCEL : ADD / DLT SELECT 1 - 8 : ENTER : END : PROG / ACT I ON P DT START STOP CH SPD1 day day 9 : 0000p 1212 : 0000a 0808 SP SP2 8 10 : 00a 12 : 00p 125 SP3 10 8 : 00p 9 : 00p 10 SP4 SU 9 : 00p 10 : 00p L LP 8 SAT SAT 9:0000P P 1212: 0000A 0808TODAYCATEGORY : MOV I E---------------------------------------------- DATE START STOP CH ABC SPSESELE CT START START DATATESELECT : SET : END : PROG / ACT I ON Press PROG twice (or ACTION) to exit this mode. 2 3 To Replace program... To Clear program... 4 Press to select the desired program. 1)Press to display. 2)Press to select and press or to set new program contents. 3)Press PROG (or ACTION). Cancel a Timer Recording: (Recording is in progress) Hold down STOP for a few seconds to cancel the Timer Recording. Any future daily or weekly recordings will be performed as programmed. Press ADD/DLT. Review, Replace or Clear Program Contents : (Recording is not in progress) 2 minutes before Timer recording is performed, “PLEASE PREPARE FOR TIMER REC” appears and/ or the PROG TIMER Indicator flashes. Be sure a cassette with record tab is loaded and the unit is in Stop mode. If the start times of two programs overlap, the lower numbered program will have priority. If the start time for a Timer Recording comes up during a normal recording or One Touch Recording (page 14), the Timer Recording will not be performed. If there is a power interruption of more than one minute, the recording may not be performed or continued. If “INCOMPLETE” appears after all items have been set, check all entries and make necessary corrections. Notes SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN ADD/DLT PROG STOP P DT START STOP CH SPD1 -- -- : -- -- : -- -- --2 8 10 : 00p 12 : 00a 125 SP3 10 8 : 00p 9 : 00p 10 SP4 SU 9 : 00p 10 : 00p L LP SELECT 1 - 8 : ENTER : END : PROG / ACT I ON VV13F1 P22-31Timer-Advanced.p65 01/09/19, 10:4923
26For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] Tape Operation (continued) Repeat Play Set to see a recording over and over. 1 2 1)Press to select “REPEAT PLAY.” 2)Press to set REPEAT PLAY “ON” or “OFF.” 3 M A I N MENU T VVCR EX I T CLOCKC H LANGUAGE SET : ACT I ON SELECT : 1)Press to select “VCR.” 2)Press ACTION to display SET UP VCR screen. Press ACTION to display MAIN MENU. 4 Press ACTION twice to end setup. REPEATREPEAT PLAY : OFFFFT I MER PROGRAMMINGT I ME STAMP : ON SELECT : SET : END : ACT I ON SET UP VCR Zero Search To quickly return to a specific tape counter location. 1 2 Press STOP.4 53 Continue playback, rewind, or fast forward.Press COUNTER RESET at the desired position to reset to “0:00:00.” Unit goes into FF or REW mode and stops at the last point the Counter was set to 0:00:00. Press DISPLAY during playback to display the Counter. Playback repeats when tape end is reached or unrecorded portion over 30 seconds is detected. During playback, you may also press PLAY/ REPEAT repeatedly on the unit to select REPEAT “ON” or “OFF.” Press CM/ZERO in stop mode to start ZERO SEARCH. : Present position mark: Zero position markBEG I N END 1 : 23 : 45 BEG I N END 0 : 00 : 00 If a blank portion exists on the tape, and depending on the position of the mark, the mark display may be out of position. Notes Press CM/ZERO repeatedly to select skip time in Play mode. No indication appears. Commercial Skip By pressing the CM/ZERO button in Playback mode you can skip over 1 to 3 minutes of recorded tape in just a few seconds. 1 Note VV13F1 P22-31Timer-Advanced.p65 01/09/19, 10:4926
Advanced Operation
27
Special VCR Features
When “ON” is selected, the picture is displayed even
when a broadcast signal is weak or non-existent.
ANTENNA : CABLE
AUTO SETCHANNEL CAPT I ONWEAK SEAK S I GNAL GNAL D I SPLAYSPLAY : OFFOFF
SELECT : SET :
END : ACT I ON
SET UP CHANNEL
M A I N MENU
CLOCKC H
SET : ACT I ON SELECT :
VCRT V
EX I TLANGUAGE
Weak Signal Display ON/OFF
1
2
3
“ON” = Picture is displayed regardless of signal
condition, and may not always be clearly
visible.
“OFF” = Screen turns solid blue when signal is
absent or weak.
If unit is connected to equipment which has blue
back feature, selecting “ON” will have no effect on
the other equipment.
VCR Lock
All operations are prohibited except Timer recording
and tape eject. Useful for families with small children.
VCR LOCK ACT I VATED
VCR LOCK OFF
4
Press ACTION to display MAIN
MENU.
1)Press
to select “CH.”
2)Press ACTION
to display SET
UP CHANNEL
screen.
Press ACTION twice
to return to the normal screen.1)Press
to
select WEAK
SIGNAL
DISPLAY .
2)Press
to set
“ON” or “OFF.”
Notes
VCR Lock is canceled automatically
after about 24 hours if clock is set.
In stop mode, hold
down REC on the unit
without a cassette
inserted for 7 seconds
to turn “ON.” Please
ignore NO CASSETTE
warning.
Repeat above with or
without cassette to
turn “OFF.”
VIDEO IN AUDIO INPOWER VOLCHSTOP/EJECT REW/
PLAY/REPEATFF/RECTIMERACTIONREC
ON TIMERPROG TIMER
REC
SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN
CM/ZERO
ACTION
DISPLAY
COUNTER
RESET
VV13F1 P22-31Timer-Advanced.p65 01/09/19, 10:4927
28For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] Special VCR Features (continued) 1 2 Press ACTION to display MAIN MENU. Preset Caption 1)Press to select “CH.” 2)Press ACTION to display SET UP CHANNEL screen. 3 1)Press to select CHANNEL CAPTION. 2)Press to display screen. 4 1)Press to select PRESET CAPTION. 2)Press to display screen. To create your own captions, go to “Manual Caption”. 6 Press ACTION four times to end setup. 5 1)Press to select a station. 2)Press to move cursor to the right. 3)Press to select channel number. 4)Press to set preset captions. Repeat step 5 until the Caption List is complete. To Make CorrectionsPress , then to select channel number. Press to change, or ADD/DLT to delete. Channel Caption is ...Station names, e.g. ABC, TNN, etc. are set so they will appear when a channel is selected. Choose 24 preset names (Preset Caption), or make up to 10 names of your own (Manual Caption). 5 Press ACTION four times to end setup. 3 1)Press to select CH NUMBER. 2)Press to move cursor to the right. Channels already set and channels deleted from Channel Memory are not displayed. You can set a total of ten channel captions with up to four characters each. 2 1)Press to select MANUAL CAPTION. 2)Press to display screen. Manual Caption 1 Do “Preset Caption” steps 1~3 (see left). 4 Press to select and to enter your caption. Characters change in the following order. Press repeatedly to move the cursor to “CH NUMBER.” Repeat steps 3 and 4 as desired. To Make CorrectionsPress , then to select channel number. Press to change, or ADD/DLT to delete. ANTENNA : CABLE AUTO SETCHANNENNEL CAPCAPT I ONONWEAK S I GNAL D I SPLAY : OFF SELECT : SET : END : ACT I ON SET UP CHANNEL PRESEPRESET T CACAPTPT I ONMANUAL CAPT I ON CHANNEL CAPT I ON SELE CT : SET : END : ACT I ON - - - - - - - - PRESET CAPT I ON SELE CT : SET : END : ACT I ON PBSCNNESPN HBO - - - - - - - -- - - - - - - - ABCABCCBS FOX NBC 4 2- -3 5- - PRESET CAPT I ON CLEA R : ADD / DLT KEY SELECT : SET : END : ACT I ON TNT UPNWB DSC CBC CTV TSNGLOB 6 2 2 1 5 2 1 2 3 M A I N MENU CLOCKC H SET : ACT I ON SELECT : VCRT V EX I TLANGUAGE MANUAL CAPT I ON SELE CT : SET : END : ACT I ON CAPT I ON - - - - CH NUMBER O2 PRESET CAPT I ONMANUANUAL CACAPTPT I ON CHANNEL CAPT I ON SELECT : SET : END : ACT I ON MANUAL CAPT I ON CH NUMBER O2CLEAR : ADD / DLT SELECT : SET : END : ACT I ON CAPT I ON A - - - A B C Z BLANK & 9 2 1 0 / ! Ready Check ListYou need a list of stations and the channel numbers you receive them on. VV13F1 P22-31Timer-Advanced.p65 01/09/19, 10:4928
Advanced Operation
29
Normal/ One
Touch Recording
ANTENNA : CABLE
AUTO SETCHANNEL CAPT I ONWEAK SEAK S I GNAL GNAL D I SPLAYSPLAY : OFFOFF
SELECT : SET :
END : ACT I ON
SET UP CHANNEL
Timer RecordingWhen Clock is not set...
Ready Check ListThe clock is set to correct time.
The record tab is in place.
1
2
3
Time Stamp Feature
This unit writes program data (see example below) for
about the first 10 seconds of every recording. The
information is then displayed about 10 seconds after
playback begins.
REPEAT PLAY : OFF
T I MER PROGRAMMINGT I ME STA STAMP : ON
SELECT : SET :
END : ACT I ON
SET UP VCR
4
Press ACTION twice to return
to normal screen.
M A I N MENU
T VVCR
EX I T
CLOCKC H
LANGUAGE
SET : ACT I ON SELECT :
Press ACTION to display MAIN MENU.
1)Press
to
select TIME
STAMP.
2)Press
to set
“ON” or “OFF.” 1)Press
to
select “VCR.”
2)Press ACTION
to display SET
UP VCR screen.
When “OFF” is selected, the program data
is written on the tape, but will not be displayed.
SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN
ACTION
ADD/DLT
VV13F1 P22-31Timer-Advanced.p65 01/09/19, 10:4929
30For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] V-Chip Control Feature Press ACTION to display MAIN MENU. Enter Secret Code V-Chip Control Feature is...This unit has a built-in V-Chip Control which allows you to block unwanted TV usage based on US MOVIES and US TV PROGRAMS Ratings. A 4-digit code must be entered to view a blocked program or change rating settings. 1 DO NOT forget your secret code. Once ratings are set, restricted tapes or programs cannot be accessed unless the secret code is entered. Changing your secret code You will need your current code. Do steps 1 ~ 4. In step 5, press ADD/DLT to clear current code. Repeat steps 4 and 5 to enter new code. 1)Press to select “TV.” 2)Press ACTION to display SET UP TV screen. 2 M A I N MENU T VVCR EX I T CLOCKC H LANGUAGE SET : ACT I ON SELECT : 1)Press to select LOCK. 2)Press to display screen.3 1)Press number keys to enter your secret code. 2)Enter same code again for confirmation. 4 Press to display US Ratings menu (see page 31). Or Press ACTION three times to exit. 5 LOCK RECOGN I ZED CHANGE CODE : ADD / DLT CONT I NUE : END : ACT I ON CONF I RM 4-D I G I T CODE **** **** Notes Process of V-Chip Control Feature Setup Blocking Enter Code ENTER : 0 - 9 END : ACT I ON LOCK ENTER 4-D I G I T CODE---- Step 2) not necessary when changing rating or secret code. Take care that you are not observed entering the secret code. To Make Corrections Press repeatedly to move the cursor. Press number keys to make the correction. LOCKLOCKCAPT I ON I NPUT SELECT : TUNERV I DEO ADJUST SELE CT : SET : END : ACT I ON SET UP TV SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN ACTION ADD/DLT NUMBER Keys VV13F1 P22-31Timer-Advanced.p65 01/09/19, 10:4930