Quasar Combination Vcr Vv 1301 Operating Instructions

11
Initial Setup4
Press CH  to start
CHANNEL /CLOCK AUTO
SET  operation. Settings are
performed automatically.
If the setup is completed, the
following screen is displayed.
If AUTO CLOCK SET IS
INCOMPLETE screen appears,
set the clock using MANUAL
CLOCK SET procedure on page 9.
Note to CABLE System Installer
This reminder is provided to call the CABLE (Cable TV) System Installers attention to
Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular,
specifies that the...

12For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Reset Language, Channels, Clock,         Time 
4)Press  and
press   to select
and set the month,
date, year, time,
and DST (Daylight
Saving Time).
5) Press ACTION
twice to 
start theclock and exit this
mode. 3) Press 
 to select
“ANTENNA,” then
press 
 to set your
antenna system
 (“TV” or “CABLE”).
4) Press 
 to select
“AUTO SET,” then
press 
.
 After Channel Auto Set is
finished, Clock Auto Set
will...

13
Basic Operation
Clock,         Time Zone Adjust
3)Press  to
select TIME ZONE
ADJUST and
press 
 or  to
subtract or add
hour(s) as
necessary.
4)Press ACTION
twice to exit.
(Only when Auto Clock is set.)
Add or Delete a Channel
Time Zone Adjust
1)Press   to
select “CLOCK.”
M A I N  MENU
VCR
CLOCKC H
SET          : ACT I ON   SELECT  :                               
T V
EX I T
C H
LANGUAGE
2)Press ACTION.
AUTO  CLOCK  SETMANUALT I ME  ZOZONE  ADJUST   T   : 0
SELECT :          SET       :          
END...

18For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1
ON-TIMER with Alarm
TV Timer  Features
Ready Check List
The clock is set to correct time.This unit can be set to automatically power on in one of 2
modes (TV, Playback).
You can also combine the On-Timer with a one minute alarm
that gradually increases in volume.
If no button on the remote or unit
(including a button used to turn off
the alarm) is pressed within 60
minutes after unit turns itself...

19
TV Operation
Press SLEEP repeatedly
to set SLEEP TIMER.
Pressing DISPLAY with
sleep timer set displays
remaining time.
Press SLEEP repeatedly
until “SLEEP TIMER 00”
appears to cancel.
Sleep Timer
This unit can be set for auto power off.
k List
rrect time.
SLEEP TIMER 30
SLEEP TIMER 60
SLEEP TIMER 90
SLEEP TIMER 00
Instant Alarm
You can set a timer alarm up to 60 min. Useful when you are
cooking, etc.
1
2
3
To cancel, press TIMER then press ADD/DLT on
the remote while CANCEL/SET screen is displayed....

20For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
OFFCAP  C1
TEXT  C1CAP  C2TEXT  C2
M A I N  MENU
T VVCR
EX I T
CLOCKC H
LANGUAGE
SET          : ACT I ON SELECT  :                              
Closed Caption Mode Feature
1
2
3
4
5
Closed Caption System
Closed Caption is ...This multi-use system not only allows the hearing impaired to enjoy selected programs,
but also makes useful information from TV stations available to everyone.
Press ACTION
to...