Projector Christie Vivid Red User Manual
Have a look at the manual Projector Christie Vivid Red User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 476 Christie manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Cleaning the Case Cleaning the Lens Cleaning the Lamp Wipe lightly with a soft, dry cloth. If the case is very dirty, clean the case with a soft, dampened cloth using mild commercial cleaner and finish with a dry cloth. Do not use liquid or aerosol cleaners. To prevent scratching the lens, clean the lens only if absolutely required. Clean the lens with a commercially available blower or cleaning paper gently in a circular motion. It is important to never touch the glass surface of the lamp, as the oil imprint will seriously degrade lamp performance. If the surface of the lamp is accidentally touched, clean carefully with a lint-free cloth moistened with isopropyl alcohol. When the lamp reaches the end of its service life, the image will become darker and colors lose their richness. When the lamp has been operating for 1400 hours or longer, the lamp status LED indicator will flash green, and the message The lamp is reaching its limits. Please replace the lamp as soon as possible will be displayed on the screen. Even though the lamp may still be working, replace the lamp to maintain optimal projector performance. When the lamp has been operated for 1500 hours, the message LAMP EXPIRED!! will be shown on the screen, replace the lamp immediately.4.2 Cleaning 4.3 Replacing the Lamp Do not turn on the electricity or the lamp when the lens cap is attached. The lens cap will become deformed due to the heat of the lamp and may cause fire or severe burns. A laser beam is projected if the laser button in the accessory wireless remote control is pressed. Never look directly into the laser beam. The laser beam may cause damage if it enters the eyes directly. Maintenance & Care Other Items DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Allow the fan to finish its cooling process, then turn the projector off, and disconnect the power cord. Allow at least for the lamp to cool down before handling. DO NOT REMOVE ANY SCREWS except the lamp cover screw and two lamp housing screws. Removing other screws could result in electric shock to the user. If continuing to use the lamp after the replacing lamp message has been displayed on screen, the lamp bulb may shatter, and pieces of glass may scatter inside the projector and out into the room. Do not touch them as the pieces of glass may cause injury. If this happens, contact your dealer for lamp replacement.one hour CAUTION 29
To Replace the Lamp: To Reset the Lamp Timer: 1. Loosen the lamp cover screw and remove the lamp cover. 2. Loosen the two screws securing the lamp housing. Remove the lamp housing by pulling on the handle. 3. Insert a new lamp housing until it is plugged into the socket. 4. Secure it in place with the two screws. 5. Re-attach the lamp cover. 6. Tighten the lamp cover screw. 7. Reset the lamp timer. 1. Press Left button, Menu button, and Up button within one second on the control keypad or remote control to enter engineering menu as shown: 2. Go to lamp reset sub-menu and move the cursor to Reset option. Press Right button to select. 3. Lamp timer will reset to 0 hour usage. There are two air filter sponges in the bottom of the Vivid Red projector to capture dust or dirt and should be replaced whenever the lamp module is replaced. The temperature will rise and the lamp will fail to light when the air filters inside of the projector become dirty and clogged. Replacement will be required more often if the projector is used in the a particularly dusty environment. 4.4 Replacing the Air Filter Maintenance & Care 30 30 1. Unplug the power cord from the socket. 2. Remove the small filter holder and unscrew the big air filter screw. 3. Detach the air filters. 4. Replace the air filters. 5. Install the air filters. 6. Re-install the filter covers.
Check These Items Check that the power cable is plugged in and that power switch on the side of projector is switched on, and power button on the projector control keypad or remote control is pressed on. Check that the projector is on. Use the menu to select the source (Composite video, S-Video, Component video, Analog RGB, Component video or DVI). See page 25. Ensure the cables are connecting correctly. Use the menu to adjust the brightness and contrast. See page 21. Or reset the settings to factory preset level using the Factory Reset option on the Utilities menu. See page 24. Remove the lens cap. Adjust the focus. See page 17. Ensure the distance between the projector and the screen is within the focus range of the lens. See page 4. Adjust the contrast or brightness in the Image menu properly. See page 21. Ensure the cables are connecting properly. See page 10. Make sure the Mute option in Audio menu is selected Off. See page 25. Install new batteries. See page 16. Make sure there is no obstacles between you and the projector receivers. Stand within the distance of remote control usage range. See page 20. See the Power and lamp indicator message chart on page 15. 5. TROUBLESHOOTING 5.1Common Problems & Solutions Problems Does not turn on No image Image is blurred Image is too dark No sound Remote control does not work Status indicator is lit or blinking 31
6.1 Specifications Model Number: Vivid Red Display Technology 0.9 LCOS D-ILA x 3 Resolution SXGA (1365 x 1024) Projection Lamp 200W UHP lamp, 1500 hours typical Brightness 1100 ANSI lumens typical Brightness Uniformity 85% typical Contrast Ratio 500:1 (full on / full off) typical Aspect Ratio Standard 4:3 and wide screen 16:9 Projection Lens (Zoom) F=2.5, f=36 - 45mm, zoom ratio1.3, Manual Focus /Manual Zoom Screen Size 30 - 300 Throw Distance 1.2 - 16m Keystone Correction 15 degree Digital Zoom 10X Remote Control Full functionality IR remote with mouse control and laser pointer Video Compatibility NTSC / PAL / PAL-M/ PAL-N / PAL 60 / HDTV 720p Computer Compatibility UXGA / SXGA / XGA / SVGA / VGA / MAC H-Sync Range 15 - 100 kHz V-Sync Range 50 - 100 Hz Dot Clock 162 MHz Sound Output 2W Stereo x 2 Terminals Inputs PC Input: D-sub15 pin x 1 Audio Input: RCA x 2 Video Input: RCA x 1 S-Video x 1 Component Input x 1 Digital Computerx1(DVI) Mouse port Terminals Outputs Audio Output: Mini jack x 1 Voltage 100 - 240 VAC, 50 - 60 Hz universal Power Consumption 380 W (Max) Dimensions 12.7(L) x 11.5(W) x 5.3(H) 324 mm (L) x 293 mm (W) x 136 mm (H) Weight 5.8 kg (12.8 lbs.) Approvals FCC Class B, UL, cUL, CE, TUV Audible Noise 38dB typical Accessories List User Manual, Laser Pointer remote control, Power/ Computer/ Stereo Audio / S-Video / Composite Video cable, Monitor Adapter for Macintosh (DIP-SW), Dual Male RCA to Female 3.5mm adapter, PS/2 - USB mouse cable / NTSC4.43 SECAM / 6. SPECIFICATION 32
Aspect ratio Brightness Contrast (ratio) Component Video Composite Video Keystone Lumen NTSC OSD PA L Pixel Resolution RS-232 S-Video SECAM Tint Zoom 7. Appendices 7.1 GlossaryThis appendix defines the specific terms used in this manual. The ratio of the width of an image to its height. The balance of light and dark shades in an image. The degree of difference between the lightest and darkest areas of the image. A high-end digital(YCrCb) and analog(YPrPb) component video signal. The output of A distortion of the image which occurs when the top and bottom borders of the image are unequal in length. The unit of measure for the amount of visible light emitted by a light source. A 525-line video format of some video tape and disk players. NTSC is widely used in North America, Mexico and Japan. (On Screen Display) Menu. A list of selectable options displayed on the screen. A 625-line video format used in Western Europe, India, China, Australia, New Zealand and parts of Africa. The smallest discernible element of data from a computer generated image. A measure of the maximum amount of horizontal and vertical pixels contained in an image. Such as 1280 x 1024 (called SXGA) A common asynchronous data transmission standard recommended by the Electronics Industries Association (EIA). Also called serial communication. A type of video signal from certain video tape players and video equipments. S-Video transmits luminance and color separately, typically producing a higher quality display than composite video. A video format of Balance of red-to-green necessary for realistic representation of NTSC signals. The adjustment of image size.video tape and some computers which combines synchronization, luminance and color signals on one output cable. some video tape and disk players, used primarily in France, Eastern Europe, Russia and parts of Africa. SECAM signals are similar in resolution and frequency to PAL signals. 33
Image Advanced Options Utilities Audio Source Standard OSD Language BNC Image Orientation Rear ProjectionFill Aspect 1:1 Normal Anamorphic Zoom WideEnglish German French Spanish Chinese RGB YUV Upright Inverted On Off Brightness Contrast H Position V Position Phase Frequency RGB Image Signals Sharpness User Red User Green User Blue ScalingRGB Image Signals Brightness Contrast H Position V Position Color Tint Detail Video Image Signals Sharpness User Red User Green User Blue Scaling Video Image Signals OSD Timeout OSD BG Freeze Frame Keystone Zoom Lamp Life Factor y Reset Mute Source Mode Volume Bass Treble BalanceOpaque Translucent On Off On Off Video RGB Mono Stereo Auto Source Composite Video S-Video Component Video Analog RGB Component RGB DVI 7.2 Menu Tree Auto Standard NTSC NTSC 4.43 PA L PA L M PA L N PA L 6 0 SECAM Video Image Signals 34 Appendices
0 50 100 150 200 250 300 0 102030405060 Proj ecti on D i s tance (ft) Screen wi dth (i n) 7.3 Throw Distance Screen Size (inch) 30 40 60 80 100 150 200 250 300 Screen Size Projection Distance (L) Height Width (cm) 76 102 152 203 254 381 508 635 762(inch) 18 24 36 48 60 90 120 150 180(cm) 46 61 91 122 152 229 305 381 457(inch) 24 32 48 64 80 120 160 200 240(cm) 61 81 122 163 203 305 406 508 610(m) 1.2-1.6 1.6 2.1 2.4 3.2 3.2 4.3 45.3 68 8 10.7 10 13.3 12 16- - - - - - - - (ft) 3.9- 5.12 5.12- 6.9 7.9-10.5 10.5-14.1 13.1-17.4 19.7-26.2 26.2-35.1 32.8-43.6 39.3-52.5 OPERATING RANGE Throw distance measured from screen to front feet (centers) of projector 35 Appendices
7.4 Serial Communication Cable Appendices Projector (female port) Projector (female port)Computer / Switcher (male) Male / Female adapter (null modem) Computer / Switcher (male) Standard RS-232 cable, with 9-pin D connectors Standard RS-232 cable, 9-pin male D connector to 25-pin female 36 NOTE:Standard RS-232 cable pin 9 is open. Male / Female adapter (null modem)