Projector Christie Roadster X9 User Manual
Have a look at the manual Projector Christie Roadster X9 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 476 Christie manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Appendix D Serial Communication Cables Roadster/Vista User’s ManualD-1 When connecting a Roadster and/or Vista projector to a computer, another projector, or a Marquee Signal Switcher, use the appropriate serial communication shielded cabling as illustrated.
SERIAL COMMUNICATION CABLES D-2 Roadster/Vista User’s Manual
SERIAL COMMUNICATION CABLES Roadster/Vista User’s ManualD-3
SERIAL COMMUNICATION CABLES D-4 Roadster/Vista User’s Manual
Appendix E Throw Distance Roadster/Vista User’s ManualE-1 Always consult this Appendix when planning a projector installation. See also 2.3, Projector Position and Mounting. Calculating Throw Distance Correct throw distance depends on the screen size and lens present—the larger the image needed, the greater the distance you must allow between the lens and screen. Once you know the screen size and lens type present, you can calculate the precise throw distance you require by using the appropriate formula as found in this appendix. Throw distance is the distance between the projector front feet and the screen. This measurement is not necessarily parallel to the floor—i.e., the projector and screen may be inclined. NOTE: If your projector is tilted up or down in relation to the screen, as is sometimes the case for large venues or elevated installations, throw distance still represents the smallest measurement between the screen and front feet center axes. Pre-calculated throw distances for the complete range of lens types and screen sizes appear in the charts and graphs on the following pages. Refer to these examples to quickly determine the proper throw distance (±5%) for your installation and lens. NOTE: Variable operating ranges for zoom lenses appear in graphs only. Table E-1. Throw Distance Formulas Lens Throw RatioThrow Distance Formula (ft.) ±5%Diagonal Screen Size ➹ (ft.) 0.8:1 (VistaGRAPHX).79 x screen width (↔ ft.) + .81 5-25 1.2:1 1.24 x screen width (↔ ft.) + .82 5-30 1.5-2.2:1 zoom Min: 1.52 x screen width (↔ ft.) + .57 Max: 2.26 x screen width (↔ ft.) + .445-40 2.2-4:1 zoom Min: 2.23 x screen width (↔ ft.) + .61 Max: 4.09 x screen width (↔ ft.) + .365-40 2.5-4:1 zoom(VistaGRAPHX)Min: 2.44 x screen width (↔ ft.) + .90 Max: 3.92 x screen width (↔ ft.) + .725-40 4-7:1 zoom Min: 4.03 x screen width (↔ ft.) + .57 Max: 7.13 x screen width (↔ ft.) + .278-40 4-7: zoom (VistaGRAPHX)Min: 3.93 x screen width (↔ ft.) + .66 Max: 6.85 x screen width (↔ ft.) + .5110-40 NOTES: 1) Make sure to use HORIZONTAL screen size in all formulas. 2) The 0.8:1 lens is not recommended for use in “S” models.