Projector Christie Roadster S6 Specifications
Have a look at the manual Projector Christie Roadster S6 Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 476 Christie manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Roadster S6 Rental Staging Roadster S6 Rental Staging NA/December2001 Brightness 6000 ANSI lumens (+/- 10%) 90% brightness uniformity across the screen Contrast Ratio (1.5-2.2:1 zoom lens) 350:1 ANSI, 500:1 on / off Resolution/Digital Processing 3 chip 0.9 DMD™‚ (Digital Micromirror Device) system True SXGA 1280x1024 chip resolution 13 bit user selectable gamma table More than 1 billion displayable colors Dynamic Scaling Resizing capabilities to scale down from 1600x1200 and up from 640x480 to the SXGA resolution of DMD Independent horizontal and vertical scaling adjustment for graphics and video inputsHorizontal Frequency Range 15 to 120 kHz Vertical Frequency Range 24 to 120 Hz Field Interchangeable Optional Lenses Fixed short throw lens: 1.2:1 Zoom lenses: 1.5-2.2:1, 2.2-4:1, and 4-7:1 Up to 130% of vertical lens offset for off-axis projection (using a 2.5:4-1 lens) Up to 80% of horizontal lens offset (using a 2.5:4-1 lens) Compatibility with VistaGRAPHX lenses: 0.8:1, 2.5-4:1, 4-7:1 (adapter required) Screen size 1.5m - 12.2m (5ft - 40ft) diagonal Lens Mount Motorized horizontal and vertical lens offset, focus and zoom adjustments Lens bayonet-style insertion system Lens mount tilt adjustment Built-in light shutter Inputs Built-in RGB/YUV/YPbPr inputs allowing separate H and V syncs, tri-level sync, composite sync and sync-on-green/luma (5 BNC connectors) Multi-standard Video Decoder Module (NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM) with one composite video input (BNC and RCA connectors) and one S-video input (two BNC and 4-pin mini-DIN connectors) Slot for an optional input module Full compatibility with Marquee Signal Switcher and third-party switchers HDTV/DTV Compatibility Full HDTV/DTV compatibility on analogue RGB/YPbPr inputs Accepts 480i, 480p, 576i, 576p, 720p, 1035i, and 1080i formats at all applicable frame/field ratesAccepts 1080p at 24, 25 and 30 Hz frame rates Optional HDTV Serial Digital Input Module Various Keypads Standard hand-held IR backlit remote keypad, front and rear infrared sensors Built-in backlit keypad Optional RS422 two-way remote controller with LCD display using 6 pin XLR connector with range of 3000ft Optional wired backlit remote keypad with 3 pin XLR connector Control / Networking Third party control system and switcher compatibility Dual RS232 ports for computer control, with loop through for connection of multiple projectors Dual 6 pin XLR RS422 ports for connection of optional LCD two-way controllers and loop-through to multiple projectors up to 600ft (183m) Diagnostics Built-in LCD diagnostic display indicates operational status and error messages Power and Status LED Full diagnostics through RS232 9 pin D connector Graphical User Interface Auto Set-up feature Direct Access intuitive user interface for complete projector control in 5 world languagesOn screen user movable menus to fit different image aspect ratios (4:3, 5:4, 16:9, etc.) On screen help menus 100 channel memories Auto p ower feature Lamp Specification/Color Temperature 1200W CERMAX ®Xenon illumination system Pre-aligned lamp module Constant color temperature over the lamp life Color temperature adjustment range: 3200 0K to 93000K User replaceable lamp within 5 minutes Typical lifetime: 1,000 hours Variable Lamp Power Supply/Light Output Control (LiteLOC™) Auto Brightness mode to maintain constant brightness over time Lamp Conserve mode to extend the lamp life Max Brightness mode for maximum light output Power Requirements Line voltage 220V AC to 240 VAC +/- 10% @ 50/60 Hz Power consumption: 1700 W maximum Thermal dissipation: 5150 BTU/hr Operating current: 8.5A maximum Weight and Size 92lbs (41.8kg) 56.6cm (W) x 76.5cm (L) x 30.2cm (H) excluding handles 22.28(W) x 30.1 (L) x 11.88 (H) excluding handlesStandard Accessories IR remote keypad with batteries User’s Manual with warranty card 2.44m (8ft) line cord Optional Accessories Serial Digital Input (SMPTE 259M/CCIR 601) with loop through feature Digital HDTV Input module (with loop through feature) compatible with all known HDTV formats DVI/DFP Input module 10 bit ADP (Advanced Digital Processing) module Wired remote keypad Compatible with all Marquee Input modules RS422 Two-way remote LCD controller Optional Accessories continued Replacement lamp module Remote infrared sensor Service Manual Librarian communication software Transit case Regulatory Approvals CSA, UL and European safety approvals North American and European EMI/EMC approvalsWarranty Two years parts and labor on projector (with RoadSERVICE membership) One year on projector light engine Accessories: One year Extended warranty available Third Party Test Criteria ISTA, IEC 60068-2-64, ASTM D4169-96, MIL STD 810F (Shipping Vibration & Shock, while in Christie Digital Systems Transit Case) 809 Wellington Street North, Kitchener ON Canada, N2G 4Y7 Tel: +1(519) 744-8005 1-800-265-2171 Fax: +1(519) 749-3136 Locations worldwide 627A Aljunied Road #05-02 Biztech Centre Singapore 389842. Tel: +65 877-8737 Fax: +65 877-8747 ImagePoint 58 Suttons Park Avenue, Reading, Berkshire, RG6 1AZ United Kingdom Tel: +44 (0) 118 926 6300 Fax: +44 (0) 118 926 6322Hohenzollernstraße 124-126 41061 Mönchengladbach Germany Tel: +49 (0) 2161 664540 Fax: +49 (0) 2161 66454610550 Camden Drive, Cypress CA 90630 USA Tel: +1(714) 236-8610 1-800-407-7727 1-800-333-3816 Fax: +1(714) 503-3375 WorldWide Web Address: http://www.christiedigital.com Due to constant research, specifications are subject to change without notice
Engineered for life on the road Christie Digital Systems’ Roadster S6 has evolved, already an established and proven system for rental staging applications, this next generation staging projector boasts the most durable and dependable chassis yet. Passing rigorous and extensive 3rd party testing, the new ruggedized Roadster S6 is engineered for life on the road. A powerhouse projector outputs a staggering 6,000 ANSI lumens from its small frame by way of a 1200W Xenon CERMAX ®illumination system. Yet the S6’s compact and rugged frame hides one of the most sophisticated projection systems available today. Advanced inverse telecine digital processing and uncompressed SXGA data projection delivers outstanding image performance for both video and data. The Roadster S6 promotes the highest-level of image performance and remains the flagship of the Christie Digital System’s Roadster Series. Christie Digital’s long-standing expertise employing 3-chip DLP™ technology enables you to take full advantage of the Roadster’s digital capabilities. Fitted with a digital interface, the Roadster S6 can project a digital signal from source to screen without signal conversion – ensuring a 100% digitally perfect image reproduction every time. Making the Roadster S6 the ideal choice for projecting HDTV and DTV images as they were intended. In keeping with our edict of offering purpose-built solutions, all models in the Roadster series are fitted with Christie Digital’s proprietary Intelligent Lens System (ILS™) and LiteLOC™ facility. The former, a fully motorized lens system allows for the automatic recall of lens position and source parameters upon changing source, not only reducing set-up times but also making it possible to stage more sophisticated events with lower labor costs. While the latter gives you full control of the S6’s programmable power supply. Fitted with password protection - LiteLOC only permits the S6 to be used with the lamp mode you select. The Roadster series is compatible with the widest range of sources and supported by a complete range of both fixed and zoom lenses (with bayonet-style insertion for fast lens change). And because the Roadster S6 has such tremendous lens offset, the S6 can accommodate even the most demanding staging environment to stunning effect. This off-set capability combines well with the systems functional, unobtrusive design and compact size making it the ideal system for stacking solutions. The Roadster S6 can be easily flown via integrated fly-points or via a newly designed stacking rig, The S6’s modular structure provides easy access to the S6’s internal systems via a quick-release side panel – even when rigged to fly. Rugged, robust and reliable this 92lbs-powerhouse projector takes the stress and strain out of event staging and is engineered for life on the road. La Boheme - Turin, Italy Lexus - Detroit, USADell - Texas, USA Easy-access for fast lamp changes Digital Visual Interface (DVI) 6000 ANSI lumens maximum True SXGA resolution Pixel clock 160 MHz LiteLOC™ facility HDTV and DTV compatible Modular architectureIntelligent Lens System (ILS™) Inexpensive upgrade path Compact design Adv. inverse telecine digital processing 5’ to 40’ diagonal image size Intuitive graphical user interface Roadster S6Roadster S6 Minimal investment for full suite of lenses DLP is a trademark of Texas Instruments Incorporated. Cermax®is a registered trademark of EG&G, Inc. Rear view of Roadster S6 showing LCD display panel and inset keypad