Projectiondesign F35 1080p Projector User Manual

21
5 Basic setup
5.1 Lens
5.1.1 Lens and lens mount
A range of fixed and zoom lenses is available to cover most applicatio\
ns, both both for front 
and rear projection. The lenses are powered and fitted with a bayonet mount for ease of 
installation.
Switch off all equipment before setting-up for proper function. 
When mounting and changing lenses, be aware that the optical system is exposed to dust 
and foreign particles as long as the lens is not attached to the system. Do not\
 leave the lens 
mount...

22User’s Guide - Basic setupF35/FL35  
user’s guide - Basic setup
5.2 Adjusting on screen image size and position
Adjusting the placement of the image on screen can be done using the:
1. Adjustable feet (E in Figure 5-1).
2. Lens shift mechanism controlled from the keypad, the remote control, RS-232 or LAN (A 
in Figure 9).
3. Zoom (for lenses with zoom) in the lens controlled from the keypad, the remote control, 
RS-232 or LAN (B in Figure 5-1).
After the correct image size and position is found, please...

23
5.4 Projector rotation
Always operate the projector horizontally, within the range of the adjustable front and rear 
feet. The projector may be rotated so that the lens points downwards. It may not be rotated 
around the through-the-lens axis. 
Operating the unit in other positions may reduce lamp life significantly, and may lead 
to overheating, finally resulting in malfunctioning. 
5.5 Ceiling mount
The projector can be ceiling mounted using an approved UL tested/ listed ceiling mount 
fixture, with...

24User’s Guide - Basic setup
A
B                          
C
F35/FL35  
user’s guide - Basic setup
5.5.1 Ceiling mount cover (optional)
The optional auxiliary cable cover can be mounted on the projector to conceal the interface 
cables and power cord when the unit is ceiling mounted. Connect all cables and fix them in\
 
place before the cable cover is attached to the projector. Figure 5-3 shows the ceiling mount 
cover.
Figure 5-3. The ceiling mount cover
5.5.2 Attaching the ceiling cover
To attach the...

25
5.6 Connection and cables
Before setting up, switch off all equipment and disconnect the power cord. In order to 
prevent damage to the projector caused by overvoltages (e.g. lightning), connect to a 
line (mains) circuit which has overvoltage protection when installing.
5.6.1  Setting up a video source
For best quality video, connect a digital video source using the HDMI 1.3a interface (O) Con-
necting a video source in Figure 5-4. The HDMI input is HDCP copy protection compliant. 
Depending on cable...

26User’s Guide - Basic setupF35/FL35  
user’s guide - Basic setup
5.6.4  Attaching X-PORT™ modules
X-PORT™ modules are separately available for purchase and not included  
with the base projector.
Switch off projector and disconnect power cord before attaching X-PORT™ module. 
Before attaching any X-PORT module, please make sure you have the latest SW run-
ning on the projector. Please go to www.projectiondesign.com to download the current 
SW and update the projector accordingly. See chapter 8 for...

27
5.7  Using X-PORT™ modules
X-PORT™ modules allows for extra functionality with the projector. This includes more con-
nectivity as well as additional image processing.
Functionality may include extended connectivity (like 3G-SDI and HDMI 3\
D) and additional 3D 
format support (like Blu-Ray frame packed, dual input sources, double flash 3D etc.)
Please refer to Chapter 6.4 for information on multi channel 3D sync.
5.7.1   X-PORT DCC120
X-PORT DCC120 is an X-PORT 1 module (post processing) adding...

28User’s Guide - Basic setupF35/FL35  
user’s guide - Basic setup
5.7.2  X-PORT 3G-SDI
The X-PORT 3G-SDI module is an X-PORT2 interface module to support all SDI, HD-SDI and 
3G-SDI formats.
5.7.2.1 Connectivity
PARAMETERVALUE
Main connectors2xBNC-F
Input A1, Input B1
Redundancy connectors2xBNC-F
Input A2, Input B2
Video formats- SDI (SMPTE 259M, up to 360 Mbps)
- HD-SDI (SMPTE 292M, up to 1.485 Gbps)
- 3G-SDI (SMPTE 424M/425M, up to 3.0 Gbps)
Nominal impedance75 Ohms
Scan formatInterlaced or...

29
5.8 Image alignment
For easier alignment of the projector, test images are built into the system.
To enable test images, go to the menu entry INSTALLATION > TEST IMAGE. Cycle the vari-
ous test images using the arrow keys. When a test image matching the aspect ratio of your 
screen has been found, use the zoom, focus, lens shift and physical projector alignment to 
match the screen.
5.9 Setting image orientation
In relation to the screen, the projector supports the following installation...

30User’s Guide - Basic setupF35/FL35  
user’s guide - Basic setup
5.12 Changing the language of the menu system
The projector menu system has a total of 11 user-selectable languages embedded for easier 
use all over the world. The default language is English.
The available languages are:
• English
• French
• German
• Spanish
• Russian
• Norwegian
• Swedish
• Korean
• Japanese
• Chinese Simplified
• Chinese Traditional
• Portuguese
• Italian
To change the language of the menu system, just select...