Projectiondesign Action M25 Projector User Manual

61
italianonorskSISTEMA DEI MENUMENYSYSTEM
SOTTOMENU IMPOSTAZIONI
Il sottomenu impostazioni contiene le impostazioni specifiche del sistema e indipendenti dalla sorgente, ad esempio la rete e l’interazione con apparecchiature di terzi, la gestione della potenza di visualizzazione, le impostazioni di sicurezza e del codice PIN tra le altre . 
impostazione data e oraImpostare per il proiettore la data e l’ora di sistema per utilizzare le opzioni di programmazione e il timer  . 
Data e ora sono...

62
englishdeutschfrancaisespañol
factory resetFactory reset erases all memorised source and system settings, and sets all back to default values .
serviceService enters the service menu . This is available to authorised service personnel only  . Entering the service menu without proper knowledge may permanentely damage the projector .
remote control IDThe projector can be set up to have a unique ID, so that it only responds to remote controls transmitting the same ID . Up to 99 units can be handled...

63
italianonorsk
back
set date and time
timer
PIN code
network
factory reset
service
remote control ID
DPMS
DPMS timeout
backlight timeout
menu timeout
splash
baudrate
broadcast
30 minutes
30 seconds
30 seconds black
19200
picture installation settingsprofileslanguage status
ripristino in fabbricaIl ripristino di fabbrica cancella tutte le impostazioni di sistema e le sorgenti memorizzate e reimposta tutti i valori di default .
assistenzaService (assistenza) consente di accedere al menu dell’assistenza ....

64
englishdeutschfrancaisespañol
PROFILES SUB MENU
The profiles sub menu contains predefined and user saved projector setup profiles, so that a specific setting or desired projection mode quickly can be reinstated .
store settingsDisplays information about the source and projector status .
recall settingsTurn the On Screen Display on (display) or off (hide) during source scan .
MENU SYSTEMMENÜSYSTEMSYSTEME MENUSISTEMA DE MENÚS
SUBMENÚ PERFILES
El submenú Perfiles contiene los perfiles de configuración...

65
italianonorskSISTEMA DEI MENUMENYSYSTEM
PROFILER UNDERMENY
systeminformasjonViser informasjon om tilkoblet kilde og projektorstatus .
OSDSkrur skjermvisning (on screen display) på og av .
back
store settings
recall settings
pictureinstallation settingsprofileslanguage status
pictureinstallation settingsprofileslanguage status
back
english
français
Deutsch
español
norsk
svensk
Русский
à´	¯
ÔŠ   .¤

_j¤
português
italiano
SPRÅK UNDERMENY
Velg språk for menysystemet og OSD meldinger og...

66
englishdeutschfrancaisespañol
STATUS SUB MENU
The status sub menu can be invoked through the menu system, or directly from the “INFO” key on the remote control . It gives direct, and easy to understand information on system and connected source status .
MENU SYSTEMMENÜSYSTEMSYSTEME MENUSISTEMA DE MENÚS
UNTERMENÜ STATUS
Das Untermenü Status wird entweder über das Menüsystem aufgerufen oder über die Taste INFO an der Fernbedienung . Es zeigt Ihnen direkte, leicht verständliche Informationen über das...

67
italianonorskSISTEMA DEI MENUMENYSYSTEM
STATUS UNDERMENY
Status undermenyen gir enkel og oversiktlig tilgang til informasjon om systemet, og tilkoblet kilde .
pictureinstallation settingsprofileslanguage status
back
source information
model name
part number
serial number
manufactured (y)
manufactured (w)
software version
lamp remaining
lamp time
total operating
lamp power
MAC address
IP address
subnet mask
default gateway
TCP/UDP port
F20 sx+
101-1200-08 072000201 200720
001-0134-01
2957 hrs31 hrs
31...

englishdeutschfrancais
68
NO IMAGE
No connection: Check if all connections are properly made .
Source off: Check if the equipment is powered on .
Lamp dead: The lamp may need replacement . 
Source hibernated: Engage the source to display and activate image .
Notebook external screen: Different notebook PC’s use different combinations of keystrokes to enable the external graphics port .
Source scan off: Check SOURCE SCAN in the INSTALLATION sub menu . If setting is OFF, the projector will not search for...

españolitalianonorsk
69
SOLUCIÓN DE PROBLEMASRISOLUZIONE DEI PROBLEMIFEILFINNING
NESSUNA IMMAGINE
Nessuna connessione:controllare se i collegamenti sono stati eseguiti correttamente .
Sorgente spenta: controllare se l’apparecchiatura è alimentata .
Lampada spenta: può essere necessario sostituire la lampada . Controllare LAMP TIME (Durata lampada) nel sottomenu UTILITIES (Utilità) .
Sorgente sospesa: impegnare la sorgente per visualizzare e attivare l’immagine .
Schermo esterno notebook: dei PC notebook...

englishdeutschfrancais
70
The projector may from time to time need cleaning . Never open the unit, as this will void any warranties  . Refer service and repair to qualified personnel only  . 
The projector is using lamps that have a limited life time  . Please refer to the LAMP CHANGE section below for further details .
Only the exterior of the unit may be cleaned  . Use a damp cloth  . Make sure no liquids enter the inside of the projector Vacuum clean all the air vents (A) regularly to maintain...