ProForm 70 Re Elliptical Manual

    CAUTION
Read all precautions and instruc-
tions in this manual before using 
this equipment. Keep this manual 
for future reference.
Model No. PFEL03712.0
Serial No.                                  
Write the serial number in the space 
above for reference.
QUESTIONS?
If you have questions, or if parts 
are damaged or missing, DO NOT 
CONTACT THE STORE; please 
contact Customer Care.
IMPORTANT: Please register this 
product (see the limited warranty 
on the back cover of this manual) 
before...

2
WARNING DECAL PLACEMENT
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

3
    WARNING: To reduce the risk of serious injury, read all important precautions and 
instructions in this manual and all warnings on your elliptical before using your elliptical. ICON 
assumes no responsibility for personal injury or property damage sustained by or through the use of 
this product.
1.  It is the responsibility of the owner to ensure 
that all users of the elliptical are adequately 
informed of all precautions.
2.  Before beginning any exercise program, 
consult your physician. This...

4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary PROFORM® 
7.0 RE elliptical. The 7.0 RE elliptical provides an 
impressive selection of features designed to make your 
workouts at home more effective and enjoyable.
For your benefit, read this manual carefully before 
you use the elliptical. If you have questions after 
reading this manual, please see the front cover of this 
manual. To help us assist you, note the product model 
number and serial number before contacting us. The 
model...

5
M8 x 35mm Bolt (76)08
M10 x 35mm Screw (75)06M10 x 93mm Screw (78)04
M8 Washer 
(33)02
M8 x 20mm Screw (79)08
M4 x 16mm Screw (64)011M8 Locknut 
(77)08
M6 x 18mm 
Screw (80)02
M6 x 18mm 
Washer (55)02
 PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each 
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the 
key number is the quantity needed for assembly. Note: If...

6
1
70
1
1
78
47
78
2
73
_  To hire an authorized service technician to 
assemble the elliptical, call 1-800-445-2480.
_  Assembly requires two persons.
_  Place all parts in a cleared area and remove the 
packing materials. Do not dispose of the packing 
materials until you  nish assembly.
_  Left parts are marked aLb or aLeftb and right parts 
are marked aRb or aRight.b
_  To identify small parts, see page 5.
_  In addition to the included tool(s), assembly 
requires the following tools:
one Phillips...

7
33.  Orient the Upright (2) and the Front Shield Cover 
(53) as shown. Slide the Front Shield Cover 
upward onto the Upright.
 Avoid pinching the wires. Slide the Upright (2) 
onto the Frame (1).
  Connect the Upright Wire (28) to the Frame Wire 
(42). Insert the excess wire into the Upright (2).
2
2
53
5379
79
79
79
42
28
Avoid pinching 
the wires
4.  Have a second person hold the Front Shield 
Cover (53) out of the way.
  Attach the Upright (2) with six M8 x 20mm 
Screws (79). Do not fully tighten...

8
5
20
39
76
63
63
20
2177
Hexagonal 
Holes
Flat Side
Avoid pinching the 
Pulse Wires (63)
5.  Identify the Left Pulse Bar (39), and orient it as 
shown. 
  Slide a Pulse Bar Cover (20) onto the Left Pulse 
Bar (39). Make sure that the flat side of the 
Pulse Bar Cover is in the indicated position.
  Have a second person hold the Left Pulse Bar 
(39) near the Upright (2). Locate the wire tie in 
the left side of the Upright. Tie the wire tie to the 
Pulse Wire (63) in the Left Pulse Bar. Then, pull 
the...

9
77.  While a second person holds the Console (4) 
near the Upright (2), connect the wires on the 
Console to the Upright Wire (28) and to the 
Pulse Wires (63). 
  Insert the excess wire into the Upright (2) or into 
the Console (4). 
 Tip: Avoid pinching the wires. Attach the 
Console (4) to the Upright (2) with four M4 x 
16mm Screws (64).
4
28
63
64
2
Avoid pinching 
the wires
88.  Identify the Right Upper Body Arm (9). 
  Orient the Right Upper Body Arm (9) and an 
Upper Body Leg (6) as shown....

10
99.  Using a small plastic bag to keep your fingers 
clean, apply a generous amount of the included 
grease to the axle on the right side of the 
Upright (2). 
  Slide the Right Upper Body Arm (9) onto the 
Upright (2).
  Attach the Right Upper Body Arm (9) with an M8 
x 20mm Screw (79) and an M8 Washer (33).
  Repeat this step on the other side of the 
elliptical.
9
33
79
8
2
Grease
31
76
6
80
3255
49
Grease
1010. Apply a small amount of grease to a Pivot 
Axle (31). 
  Insert the Pivot Axle (31)...