Pocket Radio Sangean Dt300vw Operating Instruction

							 WX      CH.0-9                 External-Make sure earphone or 
                                           pigtail antenna is inserted into 
                                           Earphone jack
A.Scan Tuning
Turn on the radio by pressing On/Off Button        . Select the desired band 
by pressing Band Selection Button        Press and hold the Tuning Control
Button      or       for more than 1/2 second . The radio will start to scan and 
will stop at the first active station. Repeating the procedure will start the scan again.The receiver will automatically turn itself off after 90 minutes of operation or you may turn it off at anytime by pressing the On/Off Button  
B.Manual Tuning
Turn on the radio by pressing On/Off Button         . Select the desired band by 
pressing Band Selection Button       . Desired station may be selected by either
pressing the Tuning Control        or        intermittently .115 85 8131413145  
						

							1213145 118111314until the desired station is reached or pressing and holding the Tuning
Control      or      until the station is reached.
C. Setting Presets Manually
Turn on receiver by pressing On/Off Button        .Select desired band by
pressing Band Selector Button         .Tune to the desired station using the
Manual or Scan Tuning Method as described above. When the desired
station is reached press Memory Button        . Memo  flashes in the LCD
display and a suggested preset position flashes. Press Memory Button again if flashing position is suitable and desired station will appear in the position selected. If you would prefer to locate desired station in a positionother than that suggested use Memory Selection Button        or       to move
to chosen postion.After selection is complete press Memory Button again tocomplete Selection.You may store a total of 9 stations for each band Original
stations are eliminated or exchanged when a new 
						

							1311
115 8121314station is selected to take its place. When the memory is full for a
particular band pressing the Memory Selection Button        will cause all
the positions to flash. In this case,select the desired position. press the
Memory Selection Switch        and the original station will be eliminated
and the new station will take its place.
D.Selecting Memory Presets
Turn on receiver by pressing On/Off Button        . Select desired band by 
pressing Band Selector Button        Move the Select Cursor      to the 
Memory  Positions     by Pressing Select Button       . Select desired
preset position using Memory Up/Down Buttons        or      
 E. Automatic Memory Preset System (APS)
This receiver is equipped with an Automatic Memory Preset System that
will automatically select. based upon signal strength. and assign positions
to stations on the band you select.Turn on receiver by pressingL
H 
						

							5 81112115 8On/off Button        .Select desired band by pressing Band Select or Button      .
Press Memory Button        . Memo will flash in display. Press Select Button  
for move than 2 seconds until auto/memo appears and flashes in display.
press memory Button        again. The receiver will automatically begin to scan
and set memory preset positions. It will dliminate any memory presets already
with in the band.
F.Memory Scan Play
Turn on receiver by pressing On/Off Buttons        .Select desired band by pressing
Band Selector Button        .Select a preset station with in band selected. Make sure
the Select Cursor     is in the Memory Position      by pressing Select Button       .
Press Tuning Control Button        or       for more than 1/2 second and release.
Display will show auto and flash The receiver will scan each preset,play for about
2 seconds and go on to the next preset. Press Tuning Control Button        or    
will stop scaning and select station desired.  LH131412131414 
						

							15Note: If the Select Cursor     points at the frequency the 
Tuning Control Up/Down Button            will continue to change frequency
within the band selected. If the Selector Cursor      points at the position
digits for the memory presets      the Tuning Control Up/Down Button  
and        will select the memory presets.
G.Deleting Memory Positions
If The memory is full or you would like to delete a memoey position select
the preset youy would like to delete.Press Memory Button        , display
will flash  memo  Then press Select Button       , display will flash  memo 
and  delete  Press Memory Button       again and selected preset  position
will be deleted.
Weather Band (WX) Reception-DT-300VW only
The DT-300VW has 10 fixed channels (0-9) for reception of NOAA
weather band. In most cases channels 1-3 of the NOAA frequencies will
cover the majority of U.S. Areas.L
L
H1314141314111211 
						

							1697 3 3 Mono/Stereo Button
Monaural or Stereo headphone reception may be selected durning FM
reception by alternately pressing the Mono/Stereo Button        The Speaker
On/OffSwitch         must be in the Off
Lock Switch
To Prevent accidental changing of any of the radio settings move the Look
Switch         to the locked position. When engaged in the  locked position
the icon key      will appear in the LCD display. To release the lock switch
simply move the switch to the off position. Make sure lock Switch        is in 
off position when radio is to be used as radio is completely inoperative
until lock switch is released. If the radio is not to be used for any extended
period of time,battery power saving may be relized by setting lock switch
in its locked position during storage.D 
						

							Specification
Type:         FM- Stereo (Via earphone)
                   AM- Standard (mono)
                    TV Band (Mono Ch,2-13 VHF) DT-300V/VW
                    Weather Band (WX) (Mono Ch. 0-9) DT-300VW
Earphone jack:                     3.5 mm mini-plug
                   16 or 32 ohm impedance (Stereo)
Output Power:                      50 mW (10THD) via built-in speaker
Speaker:   1.1inch diameter,4ohm impedance
Batteries:  3 volt(AAA/UM-4 size) x 2
Dimension (WxHxD):2 1/4  X 3 3/4  X3/4 
Weight:      3.33 OZ17