Plus Projector U5 232 User Manual

							E-40
RGB
STANDBY
VIDEO
FREEZE
MUTEECO AUTO
ASPECT
TIMER VOL KSTN ZOOMQUICK MENUQ
1234
CANCELENTER
FREEZEMUTELASER
AUTO
TIMER
VOL
ZOOM RGBVIDEO
QUICK
STANDBY
Q
12
34
R-CLICK/
CANCEL
MENU
ENTER
Menu Operation Method
•This section describes only the menu operation method. Please see this item should you need information while
performing menu operations.
•For information about a menu function, adjustment, or setting, please see one of the pages containing such descrip-
tions.
•Adjustments and settings are made by projecting an image and adjusting to an optimum condition.
•The remote control should be pointed toward the remote control sensor of the projector and operated.
•To return the various items that have been changed via the menu to their standard values (i.e., default values at time
of shipping from the factory), see “Factory Default” on Page E-59. (Some items will not return to their initial values.)
•The adjustment/setting items and contents will differ depending on the input selection and the adjustment/setting
items that can be used with the input signal are displayed on the menu.
MENU button
Used for menu display and menu closure.
SELECT 
 buttons
Used in the selection of menu names and item names as
well as in setting and adjusting the item contents.
CANCEL button
Used to return to menu name selection as well as to close
the menu (and the sub menu display).
ENTER button
Used to set the verification display.
Names and functions of remote control unit buttons used for menu operations
MENU button
Used for menu display and menu closure.
SELECT 
 buttons
Used in the selection of menu names and item names as
well as in setting and adjusting the item contents.
CANCEL button
Used to return to menu name selection as well as to close
the menu (and the sub menu display). ENTER button
Used to set the verification display. 
						

							E-41
Menu Operation Method
Menu Screen Names and Functions
Menu Name
This is the title of the menu.
There is a change to the title screen
when the menu is selected.
The cursor moves to the selected menu
name.Cursor (Deep Blue)
This permits setting/adjustment of the
item located at the cursor position.
Item Name
This is the name of the ad-
justment or setting.
 Icon: Pressing the ENTER but-
ton displays the sub menu or set-
ting contents.
Settings Contents Item Name Sub menu
Adjustment Bar
Adjustment Bar and Settings Contents
Adjustment Bar: The increases and decreases in bar length ex-
press the adjustment condition.
Setting Contents: Displays the contents that have been set.
Applicable Projector: U5-232
Not selectable for other models. 
						

							E-42
Menu Operation Method
Performing Menu Operations
•Only “Setup”, “Options” and “Info.” can be selected when no signal is being input.
•The menu display will close if, after pressing a button, the next button operation is not made within 30 seconds.
•The adjustment and the setting values are stored even when the power is switched off or the plug is disconnected
from the power outlet.
(Note that some items are not stored.)
Preparation Switch on the power of the connected equipment, start the play operation or another operation, and input
the signal to the projector.
Select the input that you wish to adjust.
The menu display of the description diagram depicts an example in which the “Keystone” item name is selected.
1Press the MENU button to display the menu
Menu Display
The menu name that existed when the menu was closed previously will be displayed.
Note:
Please check that the cursor of the item name has disappeared at the time of menu name selection.
Press the CANCEL button to make the cursor disappear.
RGB
STANDBY
VIDEO
FREEZE
MUTEECO AUTO
ASPECT
TIMER VOL KSTN ZOOMCANCEL QUICKENTERQ
1234
MENU
FREEZEMUTELASER
AUTO
TIMER RGBVIDEO
R-CLICK/
CANCEL
QUICK
ENTER
STANDBY
QMENU
2Press the SELECT  button to select the menu name
Selection of the Menu Name
Each press of the SELECT  button advances the selection one step in the sequence of “Color” → “View” → “Setup” →
“Option”  → “Info.” → “Image”. Each press of the SELECT  button causes a return of one step.
The cursor moves to the selected menu name.
RGB
STANDBY
VIDEO
FREEZE
MUTEECO AUTO
ASPECT
TIMER VOL KSTN ZOOMCANCEL QUICKMENU
ENTERQ
1234
FREEZEMUTELASER
AUTO
TIMER RGBVIDEO
R-CLICK/
CANCEL
QUICK MENU
ENTER
STANDBY
Q 
						

							E-43
3Press the  SELECT button to display the item name selection cursor.
Displaying the Cursor
This condition al-
lows selection of the
item name.
RGB
STANDBY
VIDEO
FREEZE
MUTEECO AUTO
ASPECT
TIMER VOL KSTN ZOOMCANCEL QUICKMENU
ENTERQ
1234
FREEZEMUTELASER
AUTO
TIMER RGBVIDEO
R-CLICK/
CANCEL
QUICK MENU
ENTER
STANDBY
Q
Menu Operation Method
4Press the SELECT 
 button to align the cursor with the item name
Selection of the Item Name
RGB
STANDBY
VIDEO
FREEZE
MUTEECO AUTO
ASPECT
TIMER VOL KSTN ZOOMCANCEL QUICKMENU
ENTERQ
1234
FREEZEMUTELASER
AUTO
TIMER RGBVIDEO
R-CLICK/
CANCEL
QUICK MENU
ENTER
STANDBY
Q
Items for which the  Icon Is Displayed
Press the ENTER button to display the submenu.
Press the SELECT 
 button and align the cursor with the desired item name.
There are also some items for which the setting display or the verification display will appear. Please see the various item
descriptions.
RGB
STANDBY
VIDEO
FREEZE
MUTEECO AUTO
ASPECT
TIMER VOL KSTN ZOOMCANCEL QUICKMENU
ENTERQ
1234
FREEZEMUTETIMER
VOL
ZOOM
R-CLICK/
CANCEL
12
34
ENTER
Sub menu
5Press the SELECT  button and make the adjustment (or setting) while viewing the image
When a button is pressed, the image will also change.
Making Adjustments/Settings
Adjustment display: Each press of the button results in a change of 1 point and continued presses
cause changes to proceed in order.
Setting display: The setting contents display changes with each press of the button.
RGB
STANDBY
VIDEO
FREEZE
MUTEECO AUTO
ASPECT
TIMER VOL KSTN ZOOMCANCEL QUICKMENU
ENTERQ
1234
FREEZEMUTELASER
AUTO
TIMER RGBVIDEO
R-CLICK/
CANCEL
QUICK MENU
ENTER
STANDBY
Q 
						

							E-44
Menu Operation Method
6Press the MENU button and close the menu display
Closing the Menu
RGB
STANDBY
VIDEO
FREEZE
MUTEECO AUTO
ASPECT
TIMER VOL KSTN ZOOMCANCEL QUICKENTERQ
1234
MENU
FREEZEMUTELASER
AUTO
TIMER RGBVIDEO
R-CLICK/
CANCEL
QUICK
ENTER
STANDBY
QMENU
Selecting Another Menu Name with Remote Control Operation
When a sub menu is displayed, press the CANCEL but-
ton and close the sub menu.
Press the CANCEL button again to turn off the item name
cursor.
Press the SELECT  button and select the menu name.
(Menu names cannot be selected when the item name
cursor is displayed.)
Note:
A press of the QUICK button while the menu is displayed will close the menu and display the quick menu. A press of the MENU button while
the quick menu is displayed will close the quick menu and display the menu.
RGB
STANDBY
VIDEO
FREEZE
MUTEECO AUTO
ASPECT
TIMER VOL KSTN ZOOMCANCEL QUICKMENU
ENTERQ
1234
FREEZEMUTELASER
AUTO
TIMER RGBVIDEO
QUICK MENU
ENTER
STANDBY
Q
R-CLICK/
CANCEL
RGB
STANDBY
VIDEO
FREEZE
MUTEECO AUTO
ASPECT
TIMER VOL KSTN ZOOMCANCEL QUICKMENU
ENTERQ
1234
FREEZEMUTELASER
AUTO
TIMER RGBVIDEO
R-CLICK/
CANCEL
QUICK MENU
ENTER
STANDBY
Q 
						

							E-45
List of Item Names Offering Input Selection and Adjustments/Settings
The item names that can be adjusted/set will differ depending on the input signal.
“Tint” can be adjusted only at the time of NTSC composite/S signal input.
Menu Operation Method
[Example of Menu Display Items at the Time of Input Signal RGB Selection]
RGBComponent
VIDEO
S-VIDEOMenu name
Image
Color
View
BrightnessE-47  Item NameSub Menu
Item Name
ContrastE-47 

Picture Adj.
Fine PictureE-47
H Position
E-48
V Position
E-48 



E-48
ResetE-48 
GammaE-49 
Quick Color Adj.E-49 
Color Temp.E-50 
WhiteE-50 
Color SpaceE-50 
White Balance E-51 
AspectE-52 
FilterE-52 
Vertical FlipE-53 
Horizontal FlipE-53 
KeystoneE-53 
Keystone SaveE-53 
Reference
PageInput Signal
Color
TintE-47 
Sharpness
E-47 
E-47  
						

							E-46
RGBComponent
VIDEO
S-VIDEOMenu name
Setup
Info.
Auto SourceE-54 
Color B/W SwitchingE-54  Item Name
Reference
PageSub Menu
Item Name
Auto Power OffE-54 


Memu Position
Lamp ModeE-55
Input Format
E-55
RGB






Video
E-56
S-Video
E-56
Presentation Timer
E-56
E-56 
Language
On Screen
Background
Startup ScreenOptionE-57 
E-57 
E-57 
E-58 
Security LockE-58 
StatusE-59 
Factory DefaultE-59 
Lamp Timer ResetE-59 


ResolutionE-60 
FrequencyE-60 
Lamp TimerE-60 
Input Signal
Menu Operation Method
Applicable Projector: U5-232 
						

							E-47
Image
•Perform this operation while projecting the picture for which the adjustment/setting will be made.
•Select the menu name “Image”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.
Brightness / Contrast / Color / Tint / Sharpness
Picture qualities such as brightness and contrast will change depend-
ing on the whether the room is bright or dark. Please adjust to suit your
preference.
Select the desired item name and then adjust with the SELECT  buttons.
Item Name
Brightness
Contrast
Color
Tint
SharpnessSELECT 
 ButtonSELECT  Button
Darker
Less contrast
Less dense color
More red
Softer imageBrighter
More contrast
Denser color
More green
Sharper image
Note:
* The adjustment values of the adjustable items are stored according to input source.
* “Tint” can only be adjusted when inputting NTSC composite/S-Video signals or
component signals.
Picture Adj. / Fine Picture / H Position / V Position
Usually, automatic adjustment is performed at the time of signal selec-
tion, but when automatic adjustment is not effective, these adjustments
can be performed.
Note:
When the image extends beyond the boundaries of the screen or is smaller than the
screen, check that the “View” 
→ “Aspect” setting is set to “Auto”. See “Aspect” on
Page E-52.
Picture Adj. (Picture Adjustment)
Adjust this when bright and dark ver tical bands appear on the screen.
Select the “Picture Adj.” item name and adjust with the SELECT  buttons
so that the vertical bands disappear and brightness becomes uniform across
the screen. 
						

							E-48
Fine Picture
Adjust this when the picture shows a lack of color fidelity or flickering.
Select the “Fine Picture” item name and adjust with the SELECT  buttons
so that the lack of color fidelity or the flickering disappears.
Image
H Position
Adjust this when the picture is shifted to the left or right.
Select the “H Position” item name and adjust with the SELECT  buttons.
V Position
Adjust this when the picture is shifted up or down.
Select the “V Position” item name and adjust with the SELECT  buttons.
Reset
This function resets (i.e., returns to the standard settings) the adjust-
ment/setting value of the “Image” menu name.
A press of the ENTER button forces the reset.
Note:
* The item name “Fine Picture” at the time of RGB input will not be reset.
* “Reset” of the menu name “Image” can be reset for each input source.
* To reset the adjustments/settings of all the menu items (while noting that there are some items that cannot be reset), see “Factory Default”
on Page E-59. 
						

							E-49
Color
•Do the following operation while displaying the image you want to adjust or set.
•Select the menu name “Color”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Pages E-
45.
Gamma
Gamma corrects the proportion of change of the dark portions from the
bright portions of the input signal.
Set this to reproduce natural color tone or to distinctly project a per-
sonal computer picture in a bright conference room.
Select the “Gamma” item name and select the setting contents with the SE-
LECT  buttons.
Normal ....... Correction with standard settings
Natural ........ Corrects for natural color tones
Real ............ Corrects with emphasis on brightness
Note:
When “Color” or “Standard” is selected for “Quick Color Adj.”, the “Gamma” adjust-
ment item is displayed in gray and cannot be selected or adjusted.
Quick Color Adj.
Select the preset color mode.
Select the “Quick Color Adj.” item name and select the setting contents with
the SELECT  buttons.
Color ........... Select this to prioritize color.
Standard ..... Select this to prioritize brightness.
* When “Color” or “Standard” is selected, the “Gamma”, “Color Temp.” and “White” adjustment
items are displayed in gray and cannot be selected or adjusted.
Custom ....... “Gamma”, “Color Temp.” and “White” adjustment items can be selected
and adjusted
* The selected values for the different adjustment items are stored in the memory so the desired
color adjustments can be set.