Planet Technology Router XRT-401E User Manual

 16 Parameter      Description  
L2TP Account Enter the L2TP Account provided by your ISP for the PPTP 
connection.  
  
L2TP Password Enter the Password provided by your ISP for the L2TP 
connection. 
 
Retype Password            Re-enter the Password for confirmation. 
 
Service IP Address            Specify L2TP Server IP address that you want to connect to. 
 
My IP Address                              This is the IP address that your ISP has given you to establish 
a L2TP connection. 
 
My Subnet...

 17 Parameter      Description  
Static DNS Server             Select “Enabled” to allow configuring DNS manually.  
  
Primary DNS Address This is the ISP’s DNS server IP address that they gave you; or 
you can specify your own preferred DNS server IP address. 
 
Secondary DNS Address This is optional. You can enter another DNS server’s IP 
address as a backup. The secondary DNS will be used if the 
above DNS fail. 
   
Click  when you have finished the configuration above. Congratulations! You have...

 18 Chapter 3 Advance Features 
If you have already configured the Wizard, you do NOT need to configure anything for you to start 
using the Internet.  
 
Advance features that allow you to configure the router to meet your network’s needs such as: 
Special Applications, Port Mapping, DMZ, Virtual Servers, ALG, and Firewall option.  
 
Below is a general description of what advance functions are available for this broadband router. 
 
Menu     Description  
3.1 System This section allows you to set...

 19 Parameters    Description System Settings 
3.1.1 System Status You can check system information in here, including 
system status and concurrent hardware information. 
 
3.1.2 System Settings This section Includes Host Name, Domain Name, Time 
Zone, Daylight Saving and NAT enable/disable.   
 
3.1.3 Administrator Settings Allows you to set user name, password and the idle time 
out, you can specify a Host IP address that can perform 
remote management functions. 
 
3.1.4 Firmware Upgrade This section...

 20 Parameter    Description  
INTERNET This item shows XRT-401E’s current device settings. It 
displays XRT-401E LAN port’s current LAN IP Address, 
Subnet Mask, Gateway, DNS and Connection Type. 
 
GATEWAY This item displays XRT-401E current device settings, 
including IP Address, Subnet Mask, DHCP Server, 
NAT and Firewall Status. 
 
INFORMATION This item displays XRT-401E hardware device settings, 
including Connected Clients, Runtime Code Version 
and MAC Address. 
  
 
3.1.2 System Settings 
The...

 21 Daylight Saving  The XRT-401E can also take Daylight savings into account. If 
you wish to use this function, you must select the enable box to 
enable your daylight saving configuration. 
 
NAT  Select to enable or disable NAT function.  
  
  
3.1.3 Administrator Settings 
The Administrator Settings function allows you to design user name, password and the idle time, 
it also can allow you to configure Remote Management function.
 
   
 
Parameters  Description  
Password Settings 
 
User Name To...

 22  
Idle Time Out If the inactive time exceeds the setting, XRT-401E will logout 
automatically. 0 means No timeout. 
 
Remote Management 
  
Enable To enable Remote Management function. 
 
IP Address This is the IP address of the host in the Internet that will have 
management/configuration access to XRT-401E from a remote site. If the 
IP Address is 0.0.0.0, this means anyone can access the router’s web 
console from a remote location 
                                   
Port The port number of...

 23 3.1.5 Configuration Tool 
The Configuration Tools screen allows you to save (Backup) the router’s current configuration 
setting. Saving the configuration settings provides an added protection and convenience, if the 
problems occur with the router and you have to reset to factory default. When you save the 
configuration setting (Backup) you can re-load the saved configuration into the router through the 
Restore selection. If extreme problems occur, you can use the Restore to Factory Defaults...

 24 3.1.6 System Log 
The Logs record various types of activity on XRT-401E. This data is useful for troubleshooting, 
but enabling all logs will generate a large amount of data and adversely affect performance. 
Since only a limited amount of log data can be stored in XRT-401E, log data can also be E-
mailed to your PC or sent to a Syslog Server.     

 25 Parameters   Description  
System Log  The Log records the router operating of activity on XRT-401E. 
 
Security Log  The Log shows the current security log of XRT-401E. At the top 
of the content, the security log can be saved. 
 
Remote Log Setting 
Remote Log  Select  to allow saving the log to Syslog Server. 
 
Send Log to  Enter the IP address of your Syslog Server. 
 
Email Log  Select  to allow mailing the log to specific user. 
 
Send Email to  Enter the mail address that your want to mail...