Planar Pr9020 Projector User Manual

19

Operating
• When the vertical lens shift 
is adjusted, it is recommended to shift 
the picture upward.
NOTE
1.Use the zoom ring to adjust the screen size.
Adjusting the zoom and focus
2.Use the focus ring to focus the picture.
BLANKLASER
ASPECT
 ESC MENU RESET   POSITION AUTO    MAGNIFY MY BUTTON VOLUME ON 1    MUTE OFF 2 FREEZE KEYSTONE SEARCH 
PUSH ENTER
 PAGE UP  PAGE DOWN
 STANDBY/ON VIDEO RGB
LASERINDICATOR
2/5 
1/10 
1/10 
Zoom ringFocus ring
Top
1.Use the vertical lens shift dial to shift...

20

Operating
1.Press the POSITION button on the remote control. 
The “POSITION” indication will appear on the screen.
Adjusting the position
2.Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
When you want to reset the operation, press the RESET 
button on the remote control during the operation.
To complete this operation, press the POSITION button 
again. Even if you do not do anything, the dialog will 
automatically disappear after a few seconds.
●  
When this function is performed on...

21

Operating
• The zoom level can be finely adjusted. Closely watch the screen to 
find the level you want.
NOTE
BLANKLASER
ASPECT
 ESC MENU RESET   POSITION AUTO    MAGNIFY MY BUTTON VOLUME ON 1    MUTE OFF 2 FREEZE KEYSTONE SEARCH 
PUSH ENTER
 PAGE UP  PAGE DOWN
 STANDBY/ON VIDEO RGB
LASERINDICATOR
BLANKLASER
ASPECT
 ESC MENU RESET   POSITION AUTO    MAGNIFY MY BUTTON VOLUME ON 1    MUTE OFF 2 FREEZE KEYSTONE SEARCH 
PUSH ENTER
 PAGE UP  PAGE DOWN
 STANDBY/ON VIDEO RGB
LASERINDICATOR
1.Press the ON...

22

Operating
BLANKLASER
ASPECT
 ESC MENU RESET   POSITION AUTO    MAGNIFY MY BUTTON VOLUME ON 1    MUTE OFF 2 FREEZE KEYSTONE SEARCH 
PUSH ENTER
 PAGE UP  PAGE DOWN
 STANDBY/ON VIDEO RGB
LASERINDICATOR
1.Press the BLANK button on the remote control.  
The blank screen will be displayed instead of the screen of 
input signal. Please refer to the BLANK item in SCREEN 
menu (38).
To exit from the blank screen and return to the input signal 
screen, press the BLANK button again. 
Temporarily blanking the...

23

Operating
1.Press the MENU button on the remote control or one of the cursor 
buttons on the projector. 
The Advanced MENU, or EASY MENU that has priority just after 
powered on, will appear. 
If you want to move the menu position, use the cursor buttons after 
pressing the POSITION button. While the projector is displaying any 
menu, the MENU button on the projector works as the cursor buttons.
Using the menu function
2.If you want to change it to the Advanced MENU, select the 
"Go to Advanced...

24

EASY MENU
EASY MENU
From the EASY MENU, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control. Then perform it according to 
the following table.
ItemDescription
ASPECTUsing the ◄/► buttons switches the mode for aspect ratio.See the ASPECT item in IMAGE menu (29).
AUTO 
KEYSTONE EXECUTE
Using the ► button executes the auto keystone function.See the AUTO KEYSTONE  EXECUTE item in SETUP menu (35).
KEYSTONE Using the ◄/►...

25

EASY MENU
EASY MENU (continued)
ItemDescription
BRIGHTNESSUsing the ◄/► buttons adjusts the brightness.See the BRIGHTNESS item in PICTURE menu (26).
CONTRASTUsing the ◄/► buttons adjusts the contrast.See the CONTRAST item in PICTURE menu (26).
COLORUsing the ◄/► buttons adjusts the strength of whole color.See the COLOR item in PICTURE menu (27).
TINTUsing the ◄/► buttons adjusts the tint.See the TINT item in PICTURE menu (27).
SHARPNESSUsing the ◄/► buttons adjusts the sharpness.See the...

26

PICTURE Menu
PICTURE Menu
From the PICTURE menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor 
button on the projector or remote control, or the ENTER 
button on the remote control to execute the item. Then 
perform it according to the following table.
ItemDescription
BRIGHTNESSUsing the ▲/▼ buttons adjusts the brightness.Light ó Dark
CONTRASTUsing the ▲/▼ buttons adjusts the contrast.Strong...

27

PICTURE Menu
PICTURE Menu (continued)
ItemDescription
COLOR TEMP
Using the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode.
OFFSET adjustments change the color intensity on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity on the brighter tones of the test pattern.
Choose...

28

ItemDescription
ACTIVE IRIS
Using the ▲/▼ cursor buttons changes the active iris control mode.
PRESENTATION  ó  THEATER  ó  TURN OFF               
Feature
PRESENTATIONThe active iris displays the best presentation image for both bright and dark scenes.
THEATERThe active iris displays the best theater image for both bright and dark scenes.
TURN OFFThe active iris is always open.
• The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs select TURN OFF.
MY MEMORY...