Planar Pd8130 Projector User Manual

Serial Communications
Planar PD8130/PD8150 Installation/Operation Manual 67 
PRELI
MINAR
Y
6.1 
RS-232 Connection and 
Port Configuration
To interface the PD8130/PD8150 with a home theater automation/control 
system or a PC running terminal emulation software:
1. Connect it to your control system or PC as shown in Figure 3-11. 
2. Start a terminal session on your PC using a terminal-emulation program, such 
as HyperTerminal. 
3. Configure the RS-232 controller or PC serial port as follows: 38400 bps, no...

Serial Communications
68 Planar PD8130/PD8150 Installation/Operation Manual
PRELI
MINAR
Y
Table 6-1 lists the serial command key names and IR codes. 
Table 6-1. Serial Command Key Names and IR Codes 
RS232 
KeynameRemote ButtonIR CodeDescriptionSet 1Set 2
pow.on0x010xB7Turn power on.
src.sw(none)0x020xB8Switch to the next source.
pow.off0x090xB9Turn power off.
menu0x150xBABring up or cancel menu display.
enter0x170xBBKeypad enter.
cur.down0x180xBCKeypad down arrow.
cur.up0x1A0xBDKeypad up arrow....

Serial Communications
Planar PD8130/PD8150 Installation/Operation Manual 69 
PRELI
MINAR
Y
gam.brig(none)0x890xC9Switch to Bright Room gamma.
gam.pc(none)0x8A0xCASwitch to PC gamma.
src.10x8B0xCBSwitch the active source to source 1.
src.20x8C0xCCSwitch the active source to source 2.
src.30x8D0xCDSwitch the active source to source 3.
src.40x8E0xCESwitch the active source to source 4.
src.50x8F0xCFSwitch the active source to source 5.
bla.tog(none)0x900xD0Toggles between blank screen and 
regular display....

Serial Communications
70 Planar PD8130/PD8150 Installation/Operation Manual
PRELI
MINAR
Y
Operations CommandsOperations commands allow more flexible and direct control of the projector.  
The syntax for operations commands is as follows:
op  [CR]
(Precede  and  with a space.)
The command type can be one of 5 functions:  
asp.narr(none)0xA10xE1Apply 4:3 Narrow aspect ratio to the 
active source.
pip.sw0xA30xE3Switch to next “PIP Select” state.
pip.1(none)0xA40xE4Change “PIP Select” to source 1....

Serial Communications
Planar PD8130/PD8150 Installation/Operation Manual 71 
PRELI
MINAR
Y
Table 6-2 lists the valid operations commands. For all but Execute functions, the 
response from the projector is the command and “= ” where  is 
the current value or “NA” if the value is not available.  For Execute functions the 
response is the same command.  All responses are in UPPERCASE.  
Some operations command examples:
Input: op bright ? [CR]
Response: OP BRIGHT = 100 [CR]
Input: op bright + [CR]
Response:...

Serial Communications
72 Planar PD8130/PD8150 Installation/Operation Manual
PRELI
MINAR
Y
save.isf =0 = ISF Day
1 = ISF Night
bright = ? + -0 - 200
contrast = ? + -0 - 200
saturat = ? + -0 - 200
tint = ? + -0 - 200
sharp.simple = ? + -0 - 200
sharp.mode = ?0 = Simple
1 = Advanced
horiz.sharp = ? + -0 - 200
vert.sharp = ? + -0 - 200
diag.sharp = ? + -0 - 200
sharp.over = ? + -0 - 200
horiz.text = ? + -0 - 200
vert.text = ? + -0 - 200
diag.text = ? + -0 - 200
text.over = ? + -0 - 200
noise.thresh = ? + -0...

Serial Communications
Planar PD8130/PD8150 Installation/Operation Manual 73 
PRELI
MINAR
Y
source.sel = ?0 = HDMI 1
1 = HDMI 2
2 = RGB
3 = YPrPb 1
4 = YPrPb 2
5 = S-Video
6 = Video
7 = SCART
pip.select = ?0 = Off
1 = HDMI 1
2 = HDMI 2
3 = RGB
4 = YPrPb 1
5 = YPrPb 2
6 = S-Video
7 = Video
8 = SCART
resync (execute)
color.space = ?0 = Auto
1 = REC709
2 = REC601
3 = RGB-PC
4 = RGB-Video
video.stand = ?0 = Auto
1 = NTSC
2 = PAL
3 = SECAM
gamma = ?0 = CRT
1 = Film
2 = Video
3 = Bright
4 = Graphics
color.temp...

Serial Communications
74 Planar PD8130/PD8150 Installation/Operation Manual
PRELI
MINAR
Y
bcolor = ?0 = Off
1 = Smooth
dblack = ?0 = Off
1 = On
lens.aper = ?0 = Closed
1 = Open
red.off = ? + -0-200
green.off = ? + -0-200
blue.off = ? + -0-200
red.gain = ? + -0-200
green.gain = ? + -0-200
blue.gain = ? + -0-200
vert.pos = ? + -0-200
horiz.pos = ? + -0-200
phase = ? + -0-200
tracking = ? + -0-200
sync.level = ? + -0-200
pip.pos = ?0 = Top left
1 = Top right
2 = Bottom left
3 = Bottom right
4 = Picture by...

Serial Communications
Planar PD8130/PD8150 Installation/Operation Manual 75 
PRELI
MINAR
Y
auto.pow.off = ?0 = Off
1 = On
auto.pow.on = ?0 = Off
1 = On
rear.proj = ?0 = Off
1 = On
ceil.mode = ?0 = Off
1 = On
2 = Auto
logo.disp = ?0 = Off
1 = On
power.chime = ?0 = Off
1 = On
1.key = ?0 = HDMI 1
1 = HDMI 2
2 = RGB
3 = YPrPb 1
4 = YPrPb 2
5 = S-video
6 = Video
7 = SCART
2.key = ?0 = HDMI 1
1 = HDMI 2
2 = RGB
3 = YPrPb 1
4 = YPrPb 2
5 = S-video
6 = Video
7 = SCART
3.key = ?0 = HDMI 1
1 = HDMI 2
2 = RGB
3 =...

Serial Communications
76 Planar PD8130/PD8150 Installation/Operation Manual
PRELI
MINAR
Y
5.key = ?0 = HDMI 1
1 = HDMI 2
2 = RGB
3 = YPrPb 1
4 = YPrPb 2
5 = S-video
6 = Video
7 = SCART
m1.key = ?0 = User Memory 1
1 = User Memory 2
2 = ISF Day
3 = ISF Night
m2.key = ?0 = User Memory 1
1 = User Memory 2
2 = ISF Day
3 = ISF Night
m2.key = ?0 = User Memory 1
1 = User Memory 2
2 = ISF Day
3 = ISF Night
trig.1 = ?0 = Lamp
1 = 16:9
2 = Letterbox
3 = 4:3
4 = 4:3 Narrow
5 = RS232
trig.2 = ?0 = Lamp
1 = 16:9
2 =...