Planar PD7170 Projector User Manual
Have a look at the manual Planar PD7170 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 34 Planar manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Planar PD7170 Installation/Operation Manual xi PRELI MINAR Y 6.Serial Communications ......................................................................................... 69 RS-232 Connection and Port Configuration .........................................................69 Serial Command Syntax .........................................................................................69 Key Commands .................................................................................................69 Operations Commands ....................................................................................72 7.Specifications ......................................................................................................... 79 PD7170 Specifications .............................................................................................79 PD7170 Dimensions ..................................................................................................82 Supported Timings ...................................................................................................83
xii Planar PD7170 Installation/Operation Manual PRELI MINAR Y Notes:
Planar PD7170 Installation/Operation Manual xiii 1. List Of Figures PRELI MINAR Y 2-1. PD7170 Front/Side View ............................................................................................5 2-2. PD7170 Rear/Bottom/Top View................................................................................7 2-3. PD7170 Rear Panel ....................................................................................................8 2-4. PD7170 Remote Control ............................................................................................9 3-1. IR Reception Angles ................................................................................................14 3-2. Estimating Throw Distance ......................................................................................17 3-3. Projector Placement ...............................................................................................18 3-4. Vertical Lens Shift (Example Only) .........................................................................19 3-5. Horizontal Lens Shift (Example Only) ......................................................................19 3-6. Folded Optics ...........................................................................................................20 3-7. HDMI/DVI Source Connections ..............................................................................25 3-8. RGB Connections.....................................................................................................26 3-9. Component Video Connections ...........................................................................27 3-10. Composite and S-Video Connections ................................................................28 3-11. RS-232 Control System Connection .....................................................................29 3-12. 12-Volt Trigger Output Connection .....................................................................30 3-13. External IR Receiver Connection .........................................................................30 4-1. PD7170 OSD Menu Structure ..................................................................................38 4-2. PD7170 Main Menu ..................................................................................................39 4-3. Typical PLUGE Pattern for Adjusting Brightness ....................................................44 4-4. Typical Gray Bar Pattern for Adjusting Contrast...................................................44 4-5. Typical Test Pattern for Adjusting Sharpness .........................................................45 4-6. Overscan Examples .................................................................................................47 4-7. Source Select Sub-Menu.........................................................................................48 4-8. PD7170 Advanced Menu .......................................................................................49 4-9. RGB Adjust Sub-Menu .............................................................................................52 4-10. Fine Sync Sub-Menu ..............................................................................................53 4-11. PD7170 System Menu ............................................................................................55 4-12. Source Enable Sub-Menu .....................................................................................56 4-13. PIP and PBP areas for 720p Display......................................................................57 4-14. PIP Split-Screen Mode ...........................................................................................58 4-15. PD7170 Control Menu............................................................................................59
List Of Figures xiv Planar PD7170 Installation/Operation Manual PRELI MINAR Y 4-16. PD7170 Service Menu ............................................................................................62 7-1. PD7170 Dimensions ..................................................................................................82
Planar PD7170 Installation/Operation Manual 1 PRELI MINAR Y 1.1 About This Manual This Owner’s Manual describes how to install, set up and operate the Planar PD7170 Home Theater Projector. Throughout this manual, the Planar PD7170 Home Theater Projector is referred to as the “PD7170.” Target AudiencePlanar has prepared this manual to help home theater installers and end users get the most out of the PD7170. Planar has made every effort to ensure that this manual is accurate as of the date it was printed. However, because of ongoing product improvements and customer feedback, it may require updating from time to time. You can always find the latest version of this and other Planar product manuals on-line, at www.Planar.com. If You Have Comments About This Manual... Planar welcomes your comments about this manual. Send them to [email protected]. Textual and Graphic Conventions Text Conventions: The following conventions are used in this manual, in order to clarify the information and instructions provided: • Remote and built-in keypad button identifiers are set in upper-case bold type; for example, “Press EXIT to return to the previous menu.” • Computer input (commands you type) and output (responses that appear on-screen) is shown in monospace (fixed-width) type; for example: “To change the aspect ratio to Letterbox, type op aspect = 1 . ” • All keys with functional names are initial-capped, set in bold type and enclosed in angle brackets. These keys are the following: , , , and . • indicates that you may press either the RETURN or ENTER key on your keyboard if it has both keys. In addition to these conventions, underlining, boldface and/or italics are occasionally used to highlight important information, as in this example: 1. Introduction A carriage return must be used after each command or string.Note
Introduction 2 Planar PD7170 Installation/Operation Manual PRELI MINAR Y Graphic Conventions: These symbols appear in numerous places throughout the manual, to emphasize points that you must keep in mind to avoid problems with your equipment or injury: 1.2 Using This Manual Use the following table to locate the specific information you need in this manual. TIPS highlight time-saving short cuts and helpful guidelines for using certain features. NOTES emphasize text with unusual importance or special significance. They also provide supplemental information. CAUTIONS alert users that a given action or omitted action can degrade performance or cause a malfunction. WARNINGS appear when a given action or omitted action can result in damage to the equipment, or possible non-fatal injury to the user. DANGER appears when a given action can cause severe injury or death. Tip Note Caution WARNING DANGER! If you need...... Turn to page: Information about obtaining serviceiv General information about the PD7170 Home Theater Projector3 Installation instructions13 First-time configuration instructions 32 Advanced configuration instructions49 Troubleshooting tips66 Specifications for the PD7170 Home Theater Projector 79
Introduction Planar PD7170 Installation/Operation Manual 3 PRELI MINAR Y 1.3 Description, Features and Benefits The Planar PD7170 has been engineered for the top quality picture performance and installation flexibility heretofore associated with projectors costing far more. The PD7170 high-definition, 1280 x 720 native resolution, three-chip DLP™ light engine features state-of-the-art technology for bright, pristine, high-definition images. The PD7170 is equipped with a precision optics package offering zoom, focus and lens shift controls and a throw range of 1.82:1 to 2.28:1. For even greater installation flexibility, four other lens options are available offering throw distances ranging from 1.52 to 7.09 times the screen width. The PD7170 has been engineered to comply with Imaging Science Foundation™ (ISF) standards for maximum home theater image quality. Planars sophisticated parameters for white balance and color gamut control have also been implemented for precise balance of gray scale and color. The PD7170 incorporates proprietary de-interlacing technology that provides exceptional scaling and film-to-video (3:2 pull-down) conversion for the most artifact-free images possible. Discrete infrared (IR) and RS-232 control make custom installation seamless, while discrete power on/off and source selection accommodate any automation control system. Key Features and BenefitsThe PD7170 offers these key features and benefits: • Native Resolution: 1280 x 720 (16:9 Native Aspect Ratio) • DLP system using three (3), high-performance Digital Micromirror Device (DMD) chips for increased brightness, allowing for larger screen sizes • DynamicBlack™ provides for infinitely variable adjustment of the light path through the optics, enabling the perfect balance of black and white levels for any type of video source material • Picture in Picture function allows you to display two inputs on the screen at the same time • Two (2), HDMI 1.3 Inputs with High-bandwidth Digital Content Protection (HDCP) • HDTV Compatible • Power lens shift (horizontal and vertical) • Power zoom and focus
Introduction 4 Planar PD7170 Installation/Operation Manual PRELI MINAR Y Parts ListYour PD7170 is shipped with the following items. If any items are missing or damaged, please contact your Planar dealer or Planar Customer Service at (866) PLANAR1 (752-6271). • PD7170 Home Theater Projector with standard Z100 Lens (1.82:1 – 2.28:1 throw ratio; part number 997-5488-00) • Remote Control Unit and two (2), AA-size batteries • AC Power Cords (North America, Europe, United Kingdom) • Source Connection Cables: • Component Video, 1.8 meters (5.9 feet) • HDMI to HDMI, 2.0 meters (6.6 feet) • Warranty information and registration card • Cleaning Cloth • Clip-on Light Shield • Planar PD7170 Installation/Operation Manual (this document) Optional Accessories: • Ceiling mount kit (part number 997-4214-00) • Replacement Lamp (part number 997-5353-00) • Replacement Lenses (refer to page 18 for more information): • Z80, 1.52:1 – 1.82:1 throw ratio (part number 997-5487-00) • Z200, 2.28:1 – 3.04:1 throw ratio (part number 997-5489-00) • Z400, 3.04:1 – 4.56:1 throw ratio (part number 997-5490-00) • Z500, 4.56:1 – 7.09:1 throw ratio (part number 997-5491-00) ➤
Controls and Functions Planar PD7170 Installation/Operation Manual 5 PRELI MINAR Y 2.1 PD7170 at a Glance Figure 2-1 and Figure 2-2 show the key PD7170 components. Figure 2-1. PD7170 Front/Side View •TOP IR SENSOR Receives infrared signals from the remote control unit. •SYSTEM KEYPAD Provides an alternative to using the remote control unit to select a source or navigate the on-screen display (OSD) controls. SOURCE Use this button to select a video source. Cursor Buttons (, , , ) Use these buttons to select items or settings, adjust settings or switch display patterns. 2. Controls and Functions System Keypad Top IR Sensor Exhaust Vent Intake Vent Power Button/ Status LED Front IR Sensor Projection Lens ▲ ▲ SOURCE MENU ►◄
Controls and Functions 6 Planar PD7170 Installation/Operation Manual PRELI MINAR Y ENTER () Press to select a highlighted menu item or confirm a changed setting. When no menu is present on-screen, press ENTER to access the motorized lens focus control. Press ENTER again to access the motorized lens zoom control. Press ENTER yet again to access the motorized lens shift control. Use the and buttons to adjust focus, zoom or vertical lens position. Use the and buttons to adjust horizontal lens position. MENU Press this button to show or hide the OSD menus. •POWER BUTTON/STATUS LED Indicates projector status as follows: • Solid green = AC power present, ready to turn on (lamp not lit) • Flashing green = lamp is warming up or cooling down; keypad functions not allowed • Off = Lamp lit, projector functioning normally • Alternating green/red = Lamp problem (door open, unable to strike, end of life), user intervention likely to fix problem • Flashing red = Over temperature, user intervention (clear vents, turn on AC) may fix problem • Solid red = Error that requires servicing (fan fail, Power-on self-test fail etc.) •EXHAUST VENT Warm air exits the projector through this vent. Ensure that it is not blocked. •INTAKE VENT Internal fans draw cool air into the projector through this vent. •PROJECTION LENS The inside of the lens barrel is threaded to accommodate a standard, 72-mm lens filter. For example, with a smaller screen you can install a neutral-density filter to reduce the overall light output. If needed, a light shield accessory is provided with the lens to minimize stray light emissions. (Use it only when the vertical offset is 50% of the screen height or greater.) The light shield attaches to the end of the lens (or to the filter, if used). •FRONT IR SENSOR Receives infrared signals from the remote control unit.