Planar Pd7060 Projector User Manual

21
OSD Menu Overview
Use the following illustration to quickly fi nd a setting or determine the range for a setting. 
Service
(1) None *
(2) Solid
(3) Checker
Board
(4) Vertical
Ramp
(5) Horizonal
Ramp
(6) Grid
(7) Horizontal
Lines
(8) Vertical
Lines
(9) Diagonal
Lines
(10) Splash
Screen Model Name
Unit S/N
Software Version
Active Source
Pixel Clock
Signal Format
H/V Refresh Rate
SyncType
Lamp Hours
Lamp Hour Reset
Test Pattern
Advanced
(1) Black *
(2) Blue
(3) Gray
(4) Red
(5) Green
(1) 1 *
(2) 2
(3) 3...

22
Image Menu 
Press the Menu button to open the OSD menu. Press the cursor ◄ ► button to move to the 
Image menu. Press the cursor 
▲▼ button to move up and down in the Image menu. Press ◄ ► 
to change values for settings, and then press Enter to confi rm the new setting. 
ITEMDESCRIPTIONDEFAULT
BrightnessPress the cursor ◄ ► button to adjust the brightness. 
(Range: 0 – 100)50
ContrastPress the cursor ◄ ► button to adjust the contrast. 
(Range: 0 – 100)50
SharpnessPress the cursor ◄ ► button to adjust...

23
ITEMDESCRIPTIONDEFAULT
Auto source
selectionPress the cursor ◄ ► button to enable auto source selection. OFF
Source selectPress the cursor button ◄ ► to manually select the source. The 
following screen appears. 
Press the cursor button ▲▼ to move up and down the menu. 
Press the cursor button to select an input source:
RGB: select RGB input to display images from a computer.
DVI: select Digital Video Input for digital display quality.
HDMI: select High-Defi nition Multimedia Interface. HDMI is a...

24
OSD menu Functions Available for Connected Source
FUNCTIONRGB DVI HDMICOMPONENT 
V
IDEO
COMPOSITE 
V
IDEOS-VIDEOSCART
Brightness x x x x x x x
Contrast x x x x x x x
Sharpness x x x x x x x
Color Temp x x x x x x x
Color Saturation x x x
Color Tint x x x
Gamma x x x x x x x
Color Space x x x x
Video Standard x x
x = available to video source 

25
Display Menu 
Press the Menu button to open the OSD menu. Press the cursor ◄ ► button to move to the 
Display menu. Press the cursor 
▲▼ button to move up and down in the Display menu. Press 
◄ ► to change values for settings, and then press Enter to confi rm the new setting. 
ITEMDESCRIPTIONDEFAULT
Horizontal 
positionPress the cursor ◄ ► button to move the image left or right. 
(Range: 0 – 100)50
Vertical 
positionPress the cursor ◄ ► button to move the image up or down. 
(Range: 0 – 100)50...

26
ITEMDESCRIPTIONDEFAULT
White 
peakingWhite Peaking increases the output in the brightest whites without 
changing the blacks and dark grays. It crushes the whites slightly, 
but it does not appear to clip them or seriously obscure white de-
tail. If you prefer a stronger image, adjust toward the maximum 
setting. For a smoother, more natural image, adjust toward the 
minimum setting. 
Press the cursor ◄ ► button to adjust the white peaking. 
(Range: 0 – 100)0
Logo
displayPress ◄ ► to enable or disable...

27
Advanced Menu 
Press the Menu button to open the OSD menu. Press the cursor ◄ ► button to move to the 
Advanced menu. Press the cursor 
▲▼ button to move up and down in the Confi g menu. 
Press 
◄ ► to change values for settings, and then press Enter
 to confi rm the new setting.
ITEMDESCRIPTIONDEFAULT
Blank screenPress the cursor ◄ ► button to select a background color for the 
blank screen. (Options: Black – Red – Green – Blue – White) Black
Menu positionPress the cursor ◄ ► button to position the OSD...

28
ITEMDESCRIPTIONDEFAULT
Freq. trackingPress the cursor ◄ ► button to adjust the A/D sampling number. 
(Range: 0 - 180)50
ResyncPress the cursor ◄ ► button to determine the time-out delay of 
the OSD 
(Range: 10 – 20 sec.).15
ResetResets Video Type, Video AGC, Projection, and Digital Zoom to 
default values—
The Confi g menu functions are available to all video sources. 
Language Menu 
Press the Menu button to open the OSD menu. Press the cursor ◄ ► button to move to the 
Language menu. Press the cursor...

29
User Color Menu 
Press the Menu button to open the OSD menu. Press the cursor ◄ ► button to move to the 
Tool menu. Press the cursor 
▲▼ button to move up and down in the Tool menu. Press Enter to 
confi rm the new setting.
ITEMDESCRIPTIONDEFAULT
Red gainPress the cursor ◄ ► button to adjust the red color level.
(Range: 0 - 100) 50
Green gainPress the cursor ◄ ► button to adjust the green color level. 
(Range: 0 - 100)50
Blue gainPress the cursor ◄ ► button to adjust the blue color level. 
(Range: 0 -...

30
Service Menu 
Press the Menu button to open the OSD menu. Press the cursor ◄ ► button to move to the 
Service menu. Press the cursor 
▲▼ button to move up and down in the Service menu.
ITEMDESCRIPTIONDEFAULT
Model nameDisplays the model name of the device 
(PD4010, PD7010 or PD7060)
These 
items are 
display 
only. Unit S/N Displays the serial number of the device.
Software 
versionDisplays information about the software version.
Active source Displays the active source.
Pixel clock Displays...