Planar Pd7010 Projector User Manual

							21
OSD Menu Overview
Use the following illustration to quickly fi nd a setting or determine the range for a setting. 
Service
(1) None *
(2) Solid
(3) Checker
Board
(4) Vertical
Ramp
(5) Horizonal
Ramp
(6) Grid
(7) Horizontal
Lines
(8) Vertical
Lines
(9) Diagonal
Lines
(10) Splash
Screen Model Name
Unit S/N
Software Version
Active Source
Pixel Clock
Signal Format
H/V Refresh Rate
SyncType
Lamp Hours
Lamp Hour Reset
Test Pattern
Advanced
(1) Black *
(2) Blue
(3) Gray
(4) Red
(5) Green
(1) 1 *
(2) 2
(3) 3
(4) 4
(5) 5
(1) 0%
(2) 25%
(3) 50% *
(4) 75%
(5) 100%
(1) Front *
(2) Rear
(3) Front &
Ceiling
(4) Rear &
Ceiling
(1) Eco *
(2) Normal
(3) Boost
(1) M1 *
(2) M2
(3) M3
(1) On
(2) Off *
(1) On
(2) Off *
(1) Execute
Blank Color
Menu Position
Translucent Menu
Projection Type
Power Mode
Save Memory
Auto Power Off
Auto Power On
Phase 0~100
Freq. Tracking 0~100
Resync
User Color
Red Gain 0 ~ 100
Green Gain 0 ~ 100
Blue Gain 0 ~ 100
Red Offset 0 ~ 100
Green Offset 0 ~ 100
Blue Of
Note:The default value for
all User Color settings is 50.fset 0 ~ 100
Language
English
French
German
Italian
Spanish
Swedish
Chinese-Simplified
Chinese-Traditional
Japanese
Korean
Portuguese
Russian
Image
(1) 0
(2) 25
(3) 50 *
(4) 75
(5) 100
(1) 9300K
(2) 7500K
(3) 6500K *
(4) 5000K
(1) Film
(2) Video
(3) Cinema
(4) PC
(5) Photo
(1) Auto *
(2) RGB
(3) REC709
(4) REC610
(1) Auto *
(2) NTSC
(3) PAL
(4) SECAM
(1) On
(2) Off *
(1)
RGB
(2)
Comp. (3)DVI
(4)
Video (5)
S-Video (6)HDMI
(7) SCART
(8) Hot Key
(1) Full
(2) RGB
(3) Comp.
(4) DVI
(5) Video
(6) S-Video
(7) HDMI
(8) SCART Brightness 0 ~ 100
Contrast 0 ~ 100
Sharpness
Color Temperature
Color Saturation
0 ~ 100
Color Tint 0 ~ 100
Gamma
Color Space
Video Standard
Auto Source
Selection
Source Select
Source Enable
Display
(1) 16:9 *
(2) Letter Box
(3) Native
(4) 4:3
(1) 0 *
(2) 10
(3) 20
(4) 30
(5) 50
(6) 60
(7) 70
(8) 80
(9) 90
(10) 100
(1) On *
(2) Off
(1) Crop
(2) Zoom
(3) Off *
H. Position 0 ~ 100
V. Position 0 ~ 100
Keystone
Aspect Ratio
White Peaking
Logo Display
Video Overscan
(1)RGB
(2)Comp.
(3) DVI
(4) Video
(5) S-Video
(6) HDMI
(7) SCARTSettings
Notes: * indicates the default value.
Hot key setting is programmable for input signals.
PD4010 supports HDMI through the DVI-D connector
via included adapter. 
						

							22
Image Menu 
Press the Menu button to open the OSD menu. Press the cursor ◄ ► button to move to the 
Image menu. Press the cursor 
▲▼ button to move up and down in the Image menu. Press ◄ ► 
to change values for settings, and then press Enter to confi rm the new setting. 
ITEMDESCRIPTIONDEFAULT
BrightnessPress the cursor ◄ ► button to adjust the brightness. 
(Range: 0 – 100)50
ContrastPress the cursor ◄ ► button to adjust the contrast. 
(Range: 0 – 100)50
SharpnessPress the cursor ◄ ► button to adjust the display sharpness 
(Range: 0-100)50
Color 
temperaturePress the cursor ◄ ► button to adjust the video tint/hue. 
(Options: 9300K – 7500K – 6500K – 5000K)6500K
Color 
saturationPress the cursor ◄ ► button to adjust the video saturation. 
(Range: 0 – 100)
Note: Color saturation is available for Video and S-Video modes 
only.50
Color tintPress the cursor ◄ ► button to adjust the video tint/hue. 
(Range: 0 – 100)
Note: Color tint is available for Video and S-Video modes only.50
GammaPress the cursor ◄ ► button to adjust the gamma correction of the 
display.
(Options: Film, Video, Cinema, Photo, PC)
PC [VGA]
Video [DVI, 
HDMI, 
Component, 
Video, 
S-Video, 
and SCART] 
Color spacePress the cursor ◄ ► button to adjust the color space. 
(Options: Auto – RGB – YPbPr- YCbCr)Note: Color space is available for component, PC, HDMI, and DVI 
modes only.Auto
Video 
standardPress the cursor ◄ ► button to adjust the Video Standard. 
(Options: Auto, NTSC, PAL, SECAM)
Note: Video standard is available for Video and S-Video modes 
only.Auto 
						

							23
ITEMDESCRIPTIONDEFAULT
Auto source
selectionPress the cursor ◄ ► button to enable auto source selection. OFF
Source selectPress the cursor button ◄ ► to manually select the source. The 
following screen appears. 
Press the cursor button ▲▼ to move up and down the menu. 
Press the cursor button to select an input source:
RGB: select RGB input to display images from a computer.
DVI: select Digital Video Input for digital display quality.
HDMI: select High-Defi nition Multimedia Interface. HDMI is a 
digital, point-to-point interface for video signals designed as a 
single-cable solution for home theater and consumer electronics 
equipment.
Component: select component video as the input source. 
Component video maintains the three YUV video signals in three 
separate channels and provides a sharper image than compos-
ite video and S-Video.
Video: select composite video as the input source. Composite 
video combines all three YUV video signals into one channel. 
NTSC, PAL and SECAM television are examples of composite 
video sources. S-Video and component video provide a sharper 
image than composite video.
S-Video: select Super Video as the input source. S-Video com-
bines the three YUV video signals into two channels. S-Video 
provides a sharper image than composite video, but is not as 
good as component video.
SCART: SCART connectors are prevalent in Europe. SCARTs 
are used to hook up VCRs and DVD players to TV sets.
Hot Key Settings: Press the cursor button to set hot keys.—
Source enablePress Enter
 to enable selection of the source (Auto source selec-
tion must be enabled).Full 
						

							24
OSD menu Functions Available for Connected Source
FUNCTIONRGB DVI HDMICOMPONENT 
V
IDEO
COMPOSITE 
V
IDEOS-VIDEOSCART
Brightness x x x x x x x
Contrast x x x x x x x
Sharpness x x x x x x x
Color Temp x x x x x x x
Color Saturation x x x
Color Tint x x x
Gamma x x x x x x x
Color Space x x x x
Video Standard x x
x = available to video source 
						

							25
Display Menu 
Press the Menu button to open the OSD menu. Press the cursor ◄ ► button to move to the 
Display menu. Press the cursor 
▲▼ button to move up and down in the Display menu. Press 
◄ ► to change values for settings, and then press Enter to confi rm the new setting. 
ITEMDESCRIPTIONDEFAULT
Horizontal 
positionPress the cursor ◄ ► button to move the image left or right. 
(Range: 0 – 100)50
Vertical 
positionPress the cursor ◄ ► button to move the image up or down. 
(Range: 0 – 100)50
KeystonePress the cursor ◄ ► button to enter the Keystone screen. Press 
cursor ◄ ► button to correct the left and right distortion of the pro-
jected image. Press cursor ▲▼ button to up and down distortion 
of the image. Press the Enter button to enable and disable Key-
stone correction. (Range: - 50 – +50)
0
Aspect ratioPress the cursor ◄ ► button to toggle between the 4:3 standard 
format, Letter Box, Native, and the 16:9 High Defi nition TV (HDTV) 
format.
.
16:9 
						

							26
ITEMDESCRIPTIONDEFAULT
White 
peakingWhite Peaking increases the output in the brightest whites without 
changing the blacks and dark grays. It crushes the whites slightly, 
but it does not appear to clip them or seriously obscure white de-
tail. If you prefer a stronger image, adjust toward the maximum 
setting. For a smoother, more natural image, adjust toward the 
minimum setting. 
Press the cursor ◄ ► button to adjust the white peaking. 
(Range: 0 – 100)0
Logo
displayPress ◄ ► to enable or disable if the logo displays when the pro-
jector starts, and when no source is detected. 
(Options: ON – OFF)ON
Video
overscanPress the cursor ◄ ► button to set Video Overscan. 
(Options: Crop, Zoom, OFF)OFF
Setup Menu Functions Available for Connected Source
FUNCTIONRGB DVI HDMICOMPONENT 
V
IDEO
COMPOSITE 
V
IDEOS-VIDEOSCART
Brightness x x x x x x x
Contrast x x x x x x x
Sharpness x x x x x x x
Color Temp x x x x x x x
Color Saturation x x x
Color Tint x x x
Gamma x x x x x x x
Color Space x x x x
Video Standard x x
  x = available to video source 
						

							27
Advanced Menu 
Press the Menu button to open the OSD menu. Press the cursor ◄ ► button to move to the 
Advanced menu. Press the cursor 
▲▼ button to move up and down in the Confi g menu. 
Press 
◄ ► to change values for settings, and then press Enter
 to confi rm the new setting.
ITEMDESCRIPTIONDEFAULT
Blank screenPress the cursor ◄ ► button to select a background color for the 
blank screen. (Options: Black – Red – Green – Blue – White) Black
Menu positionPress the cursor ◄ ► button to position the OSD on screen. 
(Options: Left, Right, Center, Down, Up)Left top
Translucent 
menuPress the cursor ◄ ► button to set menu screen translucency. 
(Options: 0, 25, 50, 75, 100%)50%
Projection 
typePress the cursor ◄ ► button to choose from four projection meth-
ods:
Desktop mount, front of screen
Desktop mount, rear of screen
Ceiling mount, front of screen
Ceiling mount, rear of screenDesktop 
front
Power modePress the cursor button to set power mode options. 
(Options: Eco (economy), Normal, Boost (bright)) Eco mode uses 
less power and extends lamp life, but decreases lamp brightness.Eco
Save memorySaves the current confi guration to memory. Three memory spaces 
are provided: M1, M2, M3.—
Auto power offPress the cursor button to enable or disable automatic shut-down 
of lamp after 10 minutes of inactivity. (Options: ON – OFF)OFF
Auto power onPress the cursor button to enable or disable automatic start-up of 
lamp. (Options: ON – OFF)OFF
PhasePress the cursor ◄ ► button to adjust the A/D sampling clock. 
(Range: 0 - 180)50 
						

							28
ITEMDESCRIPTIONDEFAULT
Freq. trackingPress the cursor ◄ ► button to adjust the A/D sampling number. 
(Range: 0 - 180)50
ResyncPress the cursor ◄ ► button to determine the time-out delay of 
the OSD 
(Range: 10 – 20 sec.).15
ResetResets Video Type, Video AGC, Projection, and Digital Zoom to 
default values—
The Confi g menu functions are available to all video sources. 
Language Menu 
Press the Menu button to open the OSD menu. Press the cursor ◄ ► button to move to the 
Language menu. Press the cursor 
▲▼ button to move up and down in the Language menu. 
Select the value, and then press Enter to confi rm the new setting.
ITEMDESCRIPTIONDEFAULT
LanguagePress the cursor ◄ ► to select the desired language.
Language options:  English, French, German, Italian, Spanish, 
Swedish, Chinese-Simplifi ed, Chinese-Traditional, Japanese, Ko-
rean, Portuguese, RussianEnglish
The Language menu functions are available to all video sources.  
						

							29
User Color Menu 
Press the Menu button to open the OSD menu. Press the cursor ◄ ► button to move to the 
Tool menu. Press the cursor 
▲▼ button to move up and down in the Tool menu. Press Enter to 
confi rm the new setting.
ITEMDESCRIPTIONDEFAULT
Red gainPress the cursor ◄ ► button to adjust the red color level.
(Range: 0 - 100) 50
Green gainPress the cursor ◄ ► button to adjust the green color level. 
(Range: 0 - 100)50
Blue gainPress the cursor ◄ ► button to adjust the blue color level. 
(Range: 0 - 100)50
Red offsetPress the cursor ◄ ► button to adjust the red offset level. 
(Range: 0 - 100)50
Green offsetPress the cursor ◄ ► button to adjust the green offset level. 
(Range: 0 - 100)50
Blue offsetPress the cursor ◄ ► button to adjust the blue offset level. 
(Range: 0 - 100)50 
						

							30
Service Menu 
Press the Menu button to open the OSD menu. Press the cursor ◄ ► button to move to the 
Service menu. Press the cursor 
▲▼ button to move up and down in the Service menu.
ITEMDESCRIPTIONDEFAULT
Model nameDisplays the model name of the device 
(PD4010, PD7010 or PD7060)
These 
items are 
display 
only. Unit S/N Displays the serial number of the device.
Software 
versionDisplays information about the software version.
Active source Displays the active source.
Pixel clock Displays information about the sampling rate.
Signal format Displays information about the type of signal format.
H/V refresh 
rateDisplays the refresh horizontal and vertical refresh rates.
Sync type Displays information about the sync type signal.
Lamp hoursShows the number of hours lamp has been in use for Eco and 
Normal modes.
Lamp hour 
ResetAfter replacing the lamp, this item should be reset. Refer to “Re-
placing the Projection Lamp” on page 31.
Test patternDisplays information about the type of test pattern (Range: None, 
Solid, Checkerboard, Vertical Ramp, Horizontal Ramp, Grid, Hori-
zontal Lines, Vertical Lines, Diagonal Lines, Splash Screen).None