Planar M52l Quick Start Guide

   10  
Adjust Input 
Levels, Position
Adjusting Input Levels and PositionAdjusting Levels for Video SourcesVideo sources are adjusted best if a color bar test pattern is 
available from the video source: the DVD or VCR player. If not, 
you will have to adjust by eye and the “feel” of the picture.
Note: 
When a video source is selected, Auto Setup Options are not 
available. Adjustments must be made manually.
Adjusting the Picture
1 Select a video source in the 
PICTURE
 menu.
2 Press 
LEVEL
 on the...

  11 Color Balancing
Color Balancing for One DisplayColor Balance is used to match the colors of adjacent displays 
when several displays are arranged in an array. You can also use 
it to adjust the color of a single display.
For one display, the Color Balance controls can be used to set 
the color temperature of that display.
1 To access the 
COLOR
 BALANCE
 menu, press 
MISC
 once on 
the remote.2 The m52L defaults to the brightest setting possible, which 
is 100 in the red, green and blue lines under...

   12   Color Balancing
Color Balancing for Multiple DisplaysColor balancing makes the individual displays in an array show 
the same colors. Colors vary slightly from one display to the 
next, because of slight variations in the backlights and display 
panels. Color balancing can compensate for this.
When your wall is first installed, the installer will run an ACB and 
then perform manual color balance adjustments.
Note: 
You can manually color balance after an ACB to fine-tune 
settings. These will be...

13 Recommended 
Usage
Recommended UsageIn order to get the most out of your m52L, use the following 
recommended guidelines to optimize the display.Burn-In Versus Temporary Image RetentionBurn-in causes the screen to retain an image essentially forever, 
with little or no way to correct the problem. Under normal use, 
an m52L will not experience burn-in, as plasma displays do, nor 
will it retain images in any way.
Normal use of a m52L is defined as displaying continuously 
changing video patterns or...

  14    Conformity
Declaration of ConformityManufacturer's Name: Planar Systems, Inc.
Manufacturer's Address: 1195 NW Compton Drive 
Beaverton, OR 97006 
Declares that the products
Model Numbers: m52L (Direct-view LCD)
Conforms with the provisions of:
Council Directive 2004/108/EC on Electromagnetic Compatibility;
EN55022:1998 Radiated and Conducted Emissions from IT Equipment
EN55024:1998 Immunity of IT Equipment
Including: EN61000-4-2 Electrostatic Discharge
EN61000-4-3 Radiated Immunity...