Philips Proscreen Pxg30 Projector User Manual

21
7.OperationAdjusting the Screen
Adjusting the Screen
The message disappears after 4 seconds.
The message disappears after 4 seconds.
Zoom Adjustment
Focus Adjustment
Press zoom – / +button to adjust the image.
Keystone Adjustment
Press D-keystbutton on the remote control or select
Keystone on Setting menu.  (Refer to page 36.)  Keystone
dialog box appears.
Correct the keystone distortion by pressing Cursor
Up/Down/Left/Rightbutton(s).  Press Cursor Upbutton to
reduce the upper part of the image, and...

22
Adjusting the Screen
Sound Adjustment
7.Operation
Press D-freezebutton on the remote control to capture a moving
picture.  To cancel, press D-freezebutton once again or press any
other button.
Press AV Mutebutton on the top control or the remote control to
black out the image and to mute the sound .  To restore to normal,
press AV Mutebutton again or press any other button.
A/V Mute Function Picture Freeze Function
Message disappears after 4 seconds.
Presstimer button on the remote control.  The timer...

23
8. Computer InputSelecting Input Source
Selecting Input Source
Menu Operation Direct Operation
Select an Input source by any of the followings:
–Press Databutton on the top control or CH+
button on the
remote control.The button toggles among Data1, Data2 and
Data3.
–Press D1, D2or D3button on the remote control.
If the projector cannot project properly, select a correct input
source following the Menu Operation as shown below.  
Press Menubutton to display the On-Screen Menu.  Press
Cursor...

24
Selecting Computer System8. Computer Input
This projector accepts various kinds of computer signals including VGA, SVGA, XGA and SXGA. By selecting a Data input as a
signal source, it automatically detects the signal format and tune itself to project a proper image without any additional
settings. (Signal formats provided in this projector is shown on Page 49.)
When the projector cannot recognize connected signal
as PC system provided in this projector, Auto Image
Adjustment function operates to...

25
PC Adjustment
Auto Image Adjustment
Auto Image Adjustment function is provided to automatically conform Fine sync, Total dots and Picture Position to your
computer.  This function can be operated as follows.
Press Menubutton to display the On-Screen Menu. Press
Cursor Left/Rightbutton to select PC Adjust Menuicon.
Press Cursor Downbutton to select Auto Imageicon and
then press OKbutton twice.
This Auto Image can be also executed by pressing autobutton
on the remote control.
Select Auto Imageicon and...

26
8. Computer InputPC Adjustment
This projector can automatically tune the display signals from the most of personal computers currently distributed.  However,
some computers employ the special signal formats which may not be tuned by SmartSetof this projector. In this case, the
image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture, and
projected improperly. 
The Manual PC Adjustment function allows you to manually adjust several...

27
PC Adjustment8. Computer Input
Selects the area displayed by this projector.  Select the resolution
at Display area dialog box.Display area
Adjusts the horizontal area displayed by this projector.  Press
Cursor Left/Rightbutton(s) to decrease/increase value and then
press OKbutton. Display area H
Adjusts the vertical area displayed by this projector.  Press Cursor
Left/Rightbutton(s) to decrease/increase value and then press OK
button.Display area V
Press Cursor Left/Rightbutton(s) to switch Full...

28
8. Computer InputPicture Image Adjustment
Picture Image Adjustment
Image Level Select (Menu)
Press Menubutton to display the On-Screen Menu. Press
Cursor Left/Rightbutton to select Image SelectMenu icon.
Press Cursor Downbutton to select the level that you want to
set and then press OK button.
Select the level and
press OKbutton.
The  selected level.
IMAGE SELECT MENU
Normal picture level preset on this projector.Standard
Picture level with improved halftone for graphics.Real
User preset picture...

29
Picture Image Adjustment8. Computer Input
Press Cursor Left/Right
buttons to adjust value.
Reset all adjustment to previous figure.
Reset
Store
Closes the Image Menu.
Quit
Press Menubutton to display the On-Screen Menu.  Press
Cursor Left/Right buttons to selectImage AdjustMenu icon.
Press Cursor Downbutton to select the item that you want to
adjust. and then press OKbutton.  The level of each item is
displayed.  Adjust each level by pressing Cursor Left/Right
button(s).
Select an item and
then press...

30
8. Computer InputPicture Screen Adjustment
Picture Screen Adjustment
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press Menubutton to display the On-Screen Menu.  Press
Cursor Left/Rightbutton(s) to select Screen Menuicon.
When Digital zoom +is selected, the On-Screen Menu
disappears and the message “D-Zoom +” is displayed.  Press OK
button to expand image size.  And press Cursor
Up/Down/Left/Right button(s) to pan the image.  Panning...