Philips Projector PicoPix PPX3414 User Manual

Settings21
7Settings
1Switch the device on using the on/off switch on the
side.
2After the initial screenthe main menu appears.
3Use the navigation keys to selectSettings.
4Confirm withà.
5Use
to select from the following settings.
6Confirm withà.
7Modify the settings usingà,
,
8Confirm withà.
The key takes you one step back in the menu.
Image settings
Wall paper—Select background images
Fit Screen—Convert videos and images to 16:9 resolu-
tion
Projection mode
Front—Normal projection; the device is...

22Philips · PPX3414
Language
Select the desired language for the menu.
Maintenance
Reset settings—Reset settings to factory defaults.
Firmware Update—Update Firmware
Note
Keep the device connected to a power outlet
for the duration of the firmware update.
Information—Display free space in the internal mem-
ory and information on the device (Capacity: / Free
space: / Firmware Version / Device name: / Model / Mcu
Version) Auto demo mode
Play automatically demonstration videos when product
is powered on. 

Service23
8 Service
Care Instructions for the
Battery
The capacity of the battery diminishes with time. You
can prolong the life of the battery if you observe the fol-
lowing points:
rWithout a power supply, the device operates from
the built-in battery. When the battery does not
have sufficient capacity, the device switches to
stand-by mode. Connect the device to the power
supply.
rWhen the battery does not have sufficient capac-
ity, the battery symbol in the display and the bat-
tery status light on...

24Philips · PPX3414
Cleaning
Cleaning the Lens
Use a brush or lens cleaning paper for cleaning the lens
of the projector.
Device overheated
A overheat symbol appears if the device is overheated.
rAt maximum level of brightness the symbol
appears in the status bar and the device turns
automatically to minimumlevel of brightness.
rAt minimal level of brightness the symbol shows
for three seconds in the middle of the screen.
Then the device turns off automatically.DANGER!
Switching off the device!
Switch...

Service25
Troubleshooting
Power Cycling
If a problem occurs that cannot be corrected with the
instructions in this user manual (see also the help
below), follow the steps given here.1Switch the device off using the on/off switch on the
side.
2Wait at least ten seconds.
3Switch the device on using the on/off switch on the
side.
4If the problem repeats, please contact our technical
customer service or your retailer.
ProblemsSolutions
The Pocket Projector cannot be switched onrConnect the supplied power...

26Philips · PPX3414
9 Appendix
Technical Data
Dimensions(L¦×¦H¦×¦W)...0.34x0.10x0.34ft(105x31x105mm)
Weight .......................................................................... 0,27¦kg
Recommended Ambient ........................................5¦–¦35¦ºC
Relative Humidity ..................20¦–¦80¦% (non-condensing)
File format ................................ *.mp4, *.avi, *.mov, *.mkv,
..................................... *.dat, *.mpg, *.mpeg, *.vob, *.ts...

Appendix27
The CE marking certifies that the product meets the
main requirements of the European Parliament and
Council directives 1999/5/CE, 2006/95/CE, 2004/108/-
CE and 2009/125/CE on information technology equip-
ment, regarding safety and health of users and regarding
electromagnetic interference.
The declaration of compliance can be consulted on the
site www.picopix.philips.com.
Preservation of the environmentas part of a sustainable
development plan is an essential concern of Sagemcom
Documents...

PPX3 414
NORAM-US
253604485-B
PH ILIPS andthePHILIP S’Shield Emblem areregistered trademarks ofKonink lijkePhilips N.V.
and areuse d by Sagemco mDoc uments SASunder license from Koninklijke PhilipsN.V .
È 201Sagemco mDo cumen tsSAS
All righ ts re se rv e d
Sagemc om Docu ments SAS
D ocume nts Business Unit
Headquarters: CS 50001
92848 Rueil Cedex - FRANCE
Tel: +33(0)1 57 61 10 00·Fax: +33(0)1 5761 1001
w ww .s agem com.com
Nanterre