Philips Mz 7 User Manual

							11English
3139 116 19161
Easy SetEASY SET allows you to store all available
radio stations and RDS stations
automatically.
1Press and hold STANDBY¥ON 
(on the
system only) 
for 5 seconds
; when the
system is in standby or demonstration
mode.
ªÒEASY SETÓ will be displayed,
and followed by ÒTUNERÓ and then
ÒAUTOÓ.
ªEASY SET will start searching for all
RDS radio stations with sufficient
signal strength and then followed by
radio stations on FM, MW and LW
band respectively. Weak RDS radio
stations may be stored in later
presets.
ªAll available RDS and radio stations
with sufficient signal strength will be
stored. Up to 40 presets may be
stored.
2The system will proceed to set the RDS
time automatically with the stored RDS
preset station.
¥ If no RDS station is available in the first
preset station, the program will exit
automatically.
ªAfter a radio station is found,
ÒEASY SETÓ will be displayed
and followed by ÒTIMEÓ
¥ When searching RDS time;
ªÒSEARCH RDS TIMEÓ will be
displayed.
OPERATING THE SYSTEM
ªWhen RDS time is read, ÒRDS
TIMEÓ will be displayed. The
current time will be displayed for 2
seconds and stored automatically.Notes:
Ð EASY SET will start with the RDS
station, if there are still presets
available, it will continue to store the
FM, MW and LW bands respectively.
Ð When EASY SET is used, all previously
stored radio stations will be replaced.
Ð The last preset radio station or the first
available RDS station will appear on the
display when EASY SET is completed.
Ð If RDS station does not transmit RDS
time within 90 seconds, the program
will exit automatically and the display
will show Ò
NO RDS TIME
Ó.
Switching the system ON¥ Press STANDBY¥ON 
(on the system
only)
, 3 CDC, TUNER, TAPE or CDR/
AUX.
You can also switch on the system by
pressing any one of the CD DIRECT PLAY
buttons.
Switching the system to
standby mode¥ Press STANDBY¥ON again or B on
the remote control.
ªThe system will switch to standby
mode.
Selecting the Source¥ Press the respective source selection
button: 3 CDC, TUNER, TAPE or CDR/
AUX.
ªThe display indicates the selected
source.Note:
Ð For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the
AUX/CDR IN terminals.Dim ModeThis feature allows you to select 4 different
modes for display brightness.
¥ Press DIM to select the desired screen
display brightness: DIM 1, DIM 2, DIM 3
or DIM OFF.
ªThe 
DIM display lights up.
ªÒDIM 1Ó, ÒDIM 2Ó , ÒDIM 3Ó
or ÒDIM OFFÓ will be displayed
depending on the mode selected.
Volume AdjustmentAdjust VOLUME to increase or decrease
the sound level.
For Personal Listening
Connect the headphones plug to the n
socket at the front of the system. The
speakers will be muted.MUTE (on remote control only)This feature allows you to temporarily
switch off the sound without switching off
the system when you require a moment of
silence.
¥ Press MUTE on the remote control to
switch off the sound.
ªÒMUTEÓ will be displayed.
¥ Press MUTE again on the remote
control or increase the VOLUME level to
switch on the sound.BALANCE L/R (on remote control only)Adjust the sound balance of the left and
right speakers.
¥Press BALANCE L/R on the remote
control to adjust the sound of the front
Left or Right speaker respectively.
ªThe display will show  ÒLEFT XÒ,
ÒBALANCEDÒ or ÒRIGHT XÒ.Note:
Ð
X denotes the sound level. 
						

							12English
3139 116 19161
OPERATING THE SYSTEMDigital ControlThe Digital Control feature enables you to
adjust the system to suit your type of
music.INCREDIBLE SURROUNDNormal stereo sound is determined by the
distance between the front speakers.
When Incredible Surround is switched on,
it magnifies the virtual distance between
the front speakers for an incredibly wide,
enveloping, stereo effect.
¥ Press INCREDIBLE SURROUND to
switch on.
ªThe 
INCREDIBLE
 SURROUND
 display lights
up.
ªÒINCREDIBLE SURROUND
ONÓ will be displayed.
To switch off Incredible Surround
¥ Press INCREDIBLE SURROUND again.
ªThe 
INCREDIBLE
 SURROUND
 display is
switched off.
ªÒINCREDIBLE SURROUND
OFFÓ will be displayed.
BASS/TREBLEThere are 7 different BASS/TREBLE levels
available for selection.
¥ Rotate the BASS or TREBLE to select
the desired bass or treble level
respectively.
ªThe BASS/TREBLE level will increase
or decrease between level +3 and
-3.
ªIf BASS is selected, the display will
show either BASS +X  or  -X.
ªIf TREBLE is selected, the display will
show either TREBLE +X  or
-X.Note:
Ð
X denotes the sound level.
LOUDNESS
Special sound effect that provides some
kind of bass, treble accentuation effect
specially for low volume level. It can be
switched on additionally to all sound
settings.
¥ Press LOUDNESS to switch on.
ªThe 
LOUDNESS
 display lights up.
ªÒLOUDNESS ONÓ will be
displayed.
To switch off Loudness sound effect
¥ Press LOUDNESS again.
ªThe 
LOUDNESS
 display is switched off.
ªÒLOUDNESS OFFÓ will be
displayed.
FlatThis feature allows you to temporarily
switch off all the DIGITAL CONTROL setting
(e.g. Bass, Treble, Incredible Surround,
etc.).
¥ Press FLAT to switch off the digital
control setting.
ªThe 
FLAT
 display lights up.
ªÒFLAT ONÓ will be displayed.
¥ Press FLAT again to restore the
previous setting.
ªThe 
FLAT
 display is switched off.
ªÒFLAT OFFÓ will be displayed. 
						

							13English
3139 116 19161
Warning!
1) This system is designed for
conventional CDs. Do not use any
accessories such as disc stabilizer
rings or CD treatment sheets, etc.,
which may damage the CD
mechanism.
2) Do not load more than one disc into
each tray.
3) When the CD changer is loaded
with CDs, do not turn over or shake
the system. This may jam the
changer.
BACK
REC/CD SYN
PROG/ A. REV
FLAT
PRESETSTOP
LOUDNESS
INCREDIBLE
SURROUND
TREBLE BASS
DOLBY B NRCLOCK/
TIMER
DISC 1 DISC 2 DISC 3
3 CDC
TAPE 
CDR /AUX TUNER
DIGITAL STEREO HIFI SYSTEM
DISC CHANGEOPEN•CLOSE
DUBBING
NORMAL•FAST
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz
SOUNDVOLUME
PRESET AM  LW TRACKREPEAT
MW  FMSTEREOPROGRAMTIMERSHUFFLE
SURROUND INCREDIBLEFLATLOUDNESSCD CHANGER
T.A. NEWS
SLEEPDIM
REC FRONT
HSD
D C
3CHANGER
DIM
RDS
PLAY
DIGITAL CONTROL
SEARCH/TUNE
NEWS•TA
PRESETs
s
  /A•B
You may load three discs in the CD
changer for continuous playback
without interruption.Disc for playbackThis system can playback all audio CD,
finalized audio CD-Recordable and finalized
audio CD-Rewritable format discs.
Loading the CD Changer1Press 3 CDC to select CD mode.
2Press OPEN¥CLOSE.
ªThe CD carousel slides out.
3Load a CD with the printed side up in
the right tray.
¥ You can load another disc in the left
tray.
¥ To load the third disc, press the DISC
CHANGE button.
ªThe CD carousel will rotate until the
empty tray is ready for loading.
4Press OPEN¥CLOSE to close the CD
carousel.
ªThe total number of tracks and the
playing time of the last selected disc
appear on the display.Note:
Ð To ensure good system performance,
wait until the CD changer completely
reads the disc(s) before proceeding.CD Direct PlayYou can play a CD directly by pressing the
DISC 1, DISC 2 or DISC 3 button. The CD
player will stop at the end of playback of
the selected disc.
Ð A lit button indicates that a disc is
loaded in the disc tray.
Playing a CD1Press PLAY ƒ to start playback.
ªThe disc tray, track number and
elapsed playing time of the current
track appear on the display.
¥ To interrupt playback, press.
ªThe playing time flashes.
¥ To resume playback, press PLAYƒ
again.
2To stop playback, press STOP.Note:
Ð All the available discs will play once,
then stop.Disc ChangeYou can change the outer two discs while
the third inner disc is stopped or is playing.
1Press DISC CHANGE.
ªThe CD carousel slides out.
2Replace the discs in the left and right
disc trays.
¥ If you press DISC CHANGE again
during playback, the CD will stop
playing.
ªThe CD carousel will rotate until the
inner tray is rotated out and is ready
for loading.
3Press OPEN¥CLOSE to close the CD
compartment.
CD 
						

							14English
3139 116 19161
Programming TracksProgramming tracks of a loaded CD is
possible when playback is stopped. The
display will indicate the total tracks stored
in the program. Up to 40 tracks can be
stored in the memory in any order. When
40 tracks are stored and you attempt to
store another track, the display will show
ÒFULLÓ.
1Load the desired discs in the disc trays.
2Press PROGRAM to start programming.
ªThe 
PROGRAM
 flag starts flashing.
ªIt will cancel any previously selected
repeat mode.
3Press the 3 CDC button to select the
disc.
4Press  S   or     T 
 (or 
’ / ‘ on
the remote control)
 to select the desired
track.
5Press PROGRAM to store the track.
¥ Repeat steps 
3 to 5 to store other discs
and tracks.
6Press STOP once to end programming.
ªThe total number of tracks
programmed and total playing time
appear on the display.
Notes:
Ð If the total playing time is more than
Ò
99:59
Ò or if one of the programmed
tracks has a number greater than 30,
then Ò
--:--
Ó appears on the display
instead of the total playing time.
CDSelecting a desired trackSelecting a desired track when
playback is stopped
1Press  S   or   
  T   
(or ’ / ‘ on
the remote control)
 until the desired
track appears on the display.
2Press PLAY ƒ to start playback.
ªThe selected track number and
elapsed playing time appear on the
display.
Selecting a desired track during
playback
¥ Press  S   or     T  
(less than 0.5
seconds)
 until the desired track appears
on the display.
ªThe selected track number and
elapsed playing time appear on the
display.
¥ If you press  S  
 (less than 0.5
seconds)
 it will skip to the beginning of
the current track and play the track
again.
Searching for a particular
passage during playback¥ Press and hold SEARCH S   or
T  
(or ˆ / ‡ on the remote
control)
 until the desired passage is
located.
ªThe volume will be reduced.
¥ Play returns to normal when SEARCH
S   or     T  is released.
Ð During programming,  if no button is
pressed within 20 seconds, the system
will exit program mode automatically.Reviewing the programReviewing of the program is possible only
when playback is stopped.
¥ Press  S   or   
  T   repeatedly to
review the programmed tracks.
¥ Press STOP to exit review mode.
Playing the program1Press PLAY ƒ to start program
playback.
ªÒPLAY PROGRAMÓ appears on
the display.
ªThe track number and elapsed
playing time of the current track will
appear on the display.
¥ If you press REPEAT during program
playback, the current track or all
programmed tracks will be played
repeatedly.
ªÒTRACKÓ or PROGRAM will be
displayed.
ªThe 
REPEAT
 and 
PROGRAM
 flags will be
displayed.
2Press STOP to stop program playback.
Notes:
Ð If you press any of the CD DIRECT PLAY
buttons, the system will play the
selected disc or track and the stored
program will be ignored temporarily. The
PROGRAM flag also will disappear
temporarily from the display. It will
reappear when playback of the selected
disc ends.
Ð REPEAT DISC mode will be cancelled
when program playback begins.Erasing the program 
(when
playback is stopped)
¥ Press STOP.
ªÒPROGRAM CLEAREDÓ will be
displayed.Note:
Ð The program will be erased when the
system is disconnected from the power
supply or when the CD carousel is
opened.  If the CD carousel is opened,
the tracks belonging to the outer two
trays will be erased and the display will
show Ò
TRACKS CLEARED
Ó. 
						

							15English
3139 116 19161
Shuffle 
(only on remote control)
In shuffle mode, the system plays all the
available discs and their tracks in random
order. Shuffle may be used also when
tracks are programmed.
To shuffle all the discs and tracks
1Press SHUFFLE.
ªÒSHUFFLEÓ will be displayed.
ªThe 
SHUFFLE
 flag, the disc and the
track selected at random appear on
the display.
¥ The discs and the tracks will be played
in random order until you press STOP.
¥ If you press REPEAT during shuffling,
the current track or all available discs
will be played repeatedly.
ªÒTRACKÓ or ÒALLÓ will be
displayed.
ªThe 
REPEAT
 and 
SHUFFLE
 flags will be
displayed.
2Press SHUFFLE again to resume normal
playback.
ªThe 
SHUFFLE
 flag disappears from the
display.
Note:
Ð REPEAT DISC mode will be cancelled
when shuffle is selected.CD TUNER
Note:
Ð For EASY SET feature, please refer to
page 11.Tuning to radio stations1Press TUNER to select TUNER mode.
ªÒTUNERÓ will be displayed.
A few seconds later, the current radio
frequency will be displayed.
2Press TUNER again to select the
desired waveband : FM, MW or LW.
3Press TUNE  S   or   
  T  
(or  
ˆ /
‡ on the remote control)
 for more than
one second, then release.ªThe display will show ÒSEARCHÓ
until a radio station with sufficient
signal strength is found.
¥ Repeat this procedure until the desired
station is reached.
¥ To tune to a weak radio station, briefly
press TUNE  S   or   
  T
repeatedly until the display shows the
desired frequency and/or when the best
reception has been obtained.
Note:
Ð Before activate TUNING function on the
system, make sure that the PRESET
mode is switched off .
BACK
REC/CD SYN
PROG/ A. REV
FLAT
PRESETSTOP
LOUDNESS
INCREDIBLE
SURROUND
TREBLE BASS
DOLBY B NRCLOCK/
TIMER
DISC 1 DISC 2 DISC 3
3 CDC
TAPE 
CDR /AUX TUNER
DIGITAL STEREO HIFI SYSTEM
DISC CHANGEOPEN•CLOSE
DUBBING
NORMAL•FAST
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz
SOUNDVOLUME
PRESETAM  LW TRACKREPEAT
MW  FMSTEREOPROGRAMTIMERSHUFFLE
SURROUND INCREDIBLEFLATLOUDNESSCD CHANGER
T.A. NEWS
SLEEPDIM
REC FRONT
HSD
D C
3CHANGER
DIM
RDS
PLAY
DIGITAL CONTROL
SEARCH/TUNE
NEWS•TA
PRESETs
s
  /A•B
Repeat 
(only on remote control)
You can play the current track, a disc or all
available discs repeatedly.
1Press REPEAT on the remote control to
select the various repeat modes.
ªÒTRACKÓ, ÒDISCÓ, ÒALLÓ or
ÒOFFÓ will be displayed.
ªThe 
REPEAT
 flag appears on the
display.
¥ The selected track, selected disc or all
available discs will now be played
repeatedly until you press STOP.
2Press REPEAT until the OFF mode is
displayed to resume normal playback.
ªThe 
REPEAT
 flag disappears from the
display.
Notes:
Ð REPEAT DISC mode is not available
during program play or shuffling mode.
Ð You can also repeat shuffling a program.ªÒREPEAT TRACKÒ
 or
ÒREPEAT PROGRAM
  will be
displayed.
ªThe 
REPEAT
, PROGRAM
 and 
SHUFFLE
 flags
appear on the display. 
						

							16English
3139 116 19161
TUNERStoring Preset StationsYou can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.
Automatic programming
1Press TUNER.
2Press PROGRAM for more than one
second.
ªThe 
PROGRAM
 flag starts flashing and
ÒAUTOÓ will be displayed.
ªThe system will search for every
available station in the FM waveband
first, then search by the MW and LW
wavebands.
ªAll available radio stations will be
stored automatically. The frequency
and preset number will be displayed
briefly.
ªThe system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.
ªThe system will remain tuned to the
last stored preset radio station.
Notes:
Ð You can cancel the automatic
programming by pressing PROGRAM or
STOP (on the system only).Ð If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming: only
the preset numbers 10 to 40 will be
programmed.
Manual programming
1Press TUNER.
2Press TUNER again to select the
desired waveband : FM, MW or LW.
3Press PROGRAM for less than one
second.
ªThe 
PROGRAM
 flag starts flashing.
ªThe next available preset number will
be displayed for selection.
4Press TUNE  S   or   
  T   
(or  
ˆ /
‡ on the remote control)
 to tune to the
desired frequency.
¥ If you wish to store the radio station to
another preset number, first select
PRESET mode, then press PRESET  4
or 3 to select the desired preset
number.
ªThe 
PRESET
 flag will be displayed.
5Press PROGRAM again.
ªThe 
PROGRAM
 flag disappears and the
radio station will be stored.
¥ Repeat the 
steps 3 to 5
 to store other
preset radio stations.
Notes:
Ð When 40 radio stations are stored and
you attempt to store another radio
station, the display will show
 FULL
Ó.
If you want to change an existing preset
number, repeat steps 3 Ð 5.
Ð You can cancel manual programming by
pressing STOP (on the system only).
Ð During programming,  if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Ð When in programming mode, the
PRESET mode will automatically be
activated.
Tuning to Preset Radio
Stations1Press PRESET to switch on the PRESET
mode.
ªThe 
PRESET
 flag will be displayed.
2Press PRESET  4 or 3  
(or ’ / ‘ on
the remote control)
 to select the desired
preset number.
ªThe preset number, radio frequency,
and waveband appear on the display.
Receiving RDS Radio Station
‚RDS (Radio Data System) is a broadcasting
service that allows FM stations to send
additional information along with the
regular FM radio signal. This additional
information can contain:
¥STATION NAME: The radio station
name is displayed.
¥PROGRAM TYPE: The following
program types exist and can be received
by your tuner: News, Affairs, Info, Sport,
Educate, Drama, Culture, Science,
Varied, Pop M, Rock M, M.O.R. (middle
of the road music), Light M, Classics,
Other M, No type.
¥RADIO TEXT (RT): text messages
appear in the display.
When you have tuned to a RDS station, the
RDS logo (‚) and the radio station name
will appear on the display:
¥ The display normally shows the radio
station name if available.
By repeatedly pressing RDS button you
can change the type of display
information:
ªThe display shows in turn:
STATION NAME ª
PROGRAM TYPE ª RADIO
TEXT ª STATION NAME ... 
						

							17English
3139 116 19161
Note:
Ð When you press the RDS button and the
display shows 
NO RDS
, it indicates
that either the tuned station is not
transmitting RDS signal or it is a non
RDS station.
RDS Clock
Some RDS station may be transmitting a
real clock time at an interval of every
minute.
Setting the time with RDS clock
1Press CLOCK/TIMER.
ª--:-- or current time appears on
the display.
2Press CLOCK/TIMER once more to
enter clock setting mode.
ª00:00 or current time starts
flashing.
3Press RDS.
ªThe message SEARCH RDS
TIME will be displayed.
ªIf the station does not transmit RDS
clock, NO RDS TIME will be
displayed.
ªWhen the RDS clock is read, RDS
TIME will be displayed.  The
current clock time is displayed for 2
seconds and will be stored
automatically.
ªIf within 90 seconds, the RDS time is
not detected, NO RDS TIME
will be displayed.
TUNER
NEWS¥TA (Traffic
Announcement) 
(only available in
Radio Station with RDS)
You can activate NEWS or TA function in
Standby, Demonstration or any source
mode except Tuner mode.  Once the News
Program Type (for NEWS function) or Traffic
Announcement data (for TA function) is
detected in any of the selected RDS
stations, it will switch to TUNER mode
automatically.
NEWS¥TA key toggles in the following
sequence :
NEWSªTAªOFFªNEWS
To start NEWS or TA function
1Press NEWS¥TA to select NEWS
function.
ªThe 
NEWS
 flag and NEWS will be
displayed.
¥If you want to select TA function, press
NEWS¥TA again.
ªThe 
TA flag and TA will be
displayed.
2When NEWS or TA is selected;
¥ It will scan RDS stations stored in the
first 5 preset and wait for the News
Program Type / Traffic Announcement
data to be available in any of these RDS
stations.  During the search :
ªThe current source activity will
remain uninterrupted.ªIf no RDS station is found in the first
5 presets, the NEWS¥TA function
will be switched off.  The display will
show NO RDS NEWS or NO
RDS TA and 
NEWS
 or TA flag will
disappear from the display.
¥ When NEWS¥TA transmission is
detected, the system will switch to
Tuner mode.
ªThe 
NEWS
 or TA flag starts flashing.
To cancel NEWS or TA function
¥ Press NEWS¥TA until the 
NEWS
 or TA
flag disappears and TA OFF is
displayed.Notes:
Ð If you are listening to a non RDS TUNER
radio station and should you decide to
hear NEWS or TA, first select other
source (e.g. 3CDC, TAPE or CDR/AUX),
then press NEWS¥TA.
Ð Before using the NEWS or TA feature,
ensure that the first 5 presets are RDS
stations.
Ð The NEWS¥TA works only once for
each activation.
Ð During News bulletin or Traffic
Announcement, you can press any
available source or Tuner function keys
to cancel NEWS¥TA function and
execute the relevant source mode.Ð If set is switched to Tuner source, the
NEWS¥TA function will be cancelled,

NEWS OFF
 or 
TA OFF
 will be
displayed immediately after the

TUNER
 message. 
						

							18English
3139 116 19161
TA P E
Auto Reverse Playback  
(only on
tape deck 2)
¥ Press A. REV to select the different
playback modes.
 
Œ ŒŒ Œ
Œ....... to record or playback on one
side of the tape. The tape stops
at the end of one side.
ú...... to record or playback on both
sides of the tape. The tape then
stops.
º ºº º
º.... to playback continuously on
both sides of the tape up to a
maximum of 10 times per side
unless you press STOP.Rewind/Fast ForwardWhen playback is stopped
1You can rewind or fast forward the tape
by pressing  S   or   
  T   
(or  
ˆ /
‡ on the remote control)
 respectively.
ªTA 1 XXX or TA 2 XXX
will be displayed depending on which
button is pressed.
ªThe tape will stop automatically at
the end of the rewinding or fast
forwarding.
2Press STOP to stop rewinding or fast
forwarding.
Loading a tape¥ Press on the tape deck to open the tape
deck door.
¥ Load the tape with the open side
downward and the full spool to the left.
¥ Close the tape deck door.
BACK
REC/CD SYN
PROG/A. REV
FLAT
PRESETSTOP
LOUDNESS
INCREDIBLE
SURROUND
TREBLE BASS
DOLBY B NRCLOCK/
TIMER
3 CDC
TAPE 
CDR /AUX TUNER
DIGITAL STEREO HIFI SYSTEM
DUBBING
NORMAL•FAST
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz
SOUNDVOLUME
PRESET AM  LW TRACKREPEAT
MW  FMSTEREOPROGRAMTIMERSHUFFLE
SURROUND INCREDIBLEFLATLOUDNESSCD CHANGER
T.A. NEWS
SLEEPDIM
REC FRONT
HSD
D. DISPLAY
PLAY
DIGITAL CONTROL
SEARCH/TUNEPRESETs
s
  /A•B
Tape Playback1Press TAPE to select TAPE mode.
ªÒTAPE 1Ó or ÒTAPE 2Ó will be
displayed.
¥Press TAPE again to select either tape
deck 1 or tape deck 2.
2Load the tape into the desired tape
deck.
3Press PLAYƒ to start playback.3a(For Tape Deck 2 only)Press A¥B (SIDE) to switch playback
between side A and B.
ªThe 
BACK
 or FRONT
 flag appears on the
display, depending on the side
selected.
3b(For Tape Deck 2 only)Press A. REV to select the different type
of playback mode 
(see auto reverse
playback)
.
4Press STOP to end playback.
Note:
Ð To change side before playback begins,
use the SIDE button on the remote
control. 
						

							19English
3139 116 19161 During playback
¥ Press and hold  S   or   
  T    
(or ˆ
/ ‡ on the remote control)
 until the
desired passage is located.
ªDuring searching, the sound is
reduced to a low volume.
ªWhen you release  S   or   
  T ,
the tape continues playing.
Notes:
Ð
XXX
 denotes the tape counter
number.  It will automatically set to zero
after detecting end of tape or changing
tape play direction on TAPE 2. To reset
the tape counter number to zero during
playback, press the DIM button for more
than 2 seconds.
Ð During rewinding or fast forwarding of a
tape, it is also possible to select another
source (e.g. 3 CDC, TUNER or CDR/
AUX).
Ð Before use, check and tighten slack tape
with a pencil.  Slack tape may get
jammed or may burst in the mechanism.
Ð C-120 tape is extremely thin and is
easily deformed or damaged.  It is not
recommended for use in this system.
Ð Store the tapes at room temperature
and do not put them too close to a
magnetic field (for example, a
transformer, TV, or speaker).
.
Selecting External EquipmentIf you have connected the audio out
terminals of the external equipment (TV,
VCR, Laser Disc player, DVD player, or CD
Recorder) to the AUX/CDR IN terminals,
you can hear the enhanced sound from the
system.
¥ Press CDR/AUX to select AUX-DVD
mode.
ªAUX/DVD will be displayed.
¥ Press CDR/AUX again to select the
CDRW mode.
ªCDRW will be displayed.
BACK
REC/CD SYN
PROG/A. REV
FLAT
PRESETSTOP
LOUDNESS
INCREDIBLE
SURROUND
TREBLE BASS
DOLBY B NRCLOCK/
TIMER
3 CDC
TAPE 
CDR /AUX TUNER
DIGITAL STEREO HIFI SYSTEM
DUBBING
NORMAL•FAST
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz
SOUNDVOLUME
PRESET AM  LW TRACKREPEAT
MW  FMSTEREOPROGRAMTIMERSHUFFLE
SURROUND INCREDIBLEFLATLOUDNESSCD CHANGER
T.A. NEWS
SLEEPDIM
REC FRONT
HSD
DIM
PLAY
DIGITAL CONTROL
SEARCH/TUNEPRESETs
s
  /A•B
TAPE CDR/AUX
Notes:
Ð There are two external modes:
i. the normal AUX/DVD mode.
ii.  the CDRW mode; where the LINE
OUT of this mini system is muted.
You will not be able to record or
listen to the sound from the LINE
OUT.
Ð You are advised not to listen to and
record from the same source
simultaneously.
Ð All the sound control features (e.g.
Incredible Surround, Bass/Treble, etc.)
are available for selection. 
						

							20English
3139 116 19161
RECORDING
BACK
REC/CD SYN
PROG/A. REV
FLAT
PRESETSTOP
LOUDNESS
INCREDIBLE
SURROUND
TREBLE BASS
DOLBY B NRCLOCK/
TIMER
3 CDC
TAPE 
CDR /AUX TUNER
DIGITAL STEREO HIFI SYSTEM
DUBBING
NORMAL•FAST
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz
SOUNDVOLUME
PRESET AM  LW TRACKREPEAT
MW  FMSTEREOPROGRAMTIMERSHUFFLE
SURROUND INCREDIBLEFLATLOUDNESSCD CHANGER
T.A. NEWS
SLEEPDIM
REC FRONT
HSD
DIM
PLAY
DIGITAL CONTROL
SEARCH/TUNEPRESETs
s
  /A•B
Notes:
Ð For recording, use only tape of IEC type I
(normal tape) or IEC type II (Cr0
2).
Ð The tape is secured at both ends with
leader tape. At the beginning and end of
tape, nothing will be recorded for 6 to 7
seconds.
Ð The recording level is set automatically,
regardless of the position of Volume,
Incredible Surround or Bass/Treble.
Ð To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
Ð If  Ò
CHECK TAPE
Ó is displayed, the
protection tab has been broken.  Put a
piece of clear adhesive tape over the
opening.  Do not cover the Cr0
2 tape
detection hole when covering the tab
opening.
Recording from other sources(only on tape deck 2)1Press TAPE to select tape deck 2.
2Load a blank tape into tape deck 2 with
the open side downward.
3Press SIDE on remote control to select
the recording side.
ªThe 
BACK
 or FRONT
 flag will be
displayed, depending on the side
selected.
4Press 3 CDC, TUNER or CDR/AUX.
¥ Start playback of the selected source.
5Press REC to start recording.
ªThe 
REC flag starts flashing.
6Press STOP to stop recording.
Notes:
Ð Only  
Œ ŒŒ Œ
Π or  
ú
  mode is available
during recording.
Ð During recording, it is not possible to
listen to another source.