Philips Lx8200sa User Manual

21
English
Special DVD / VCD features
A number of operations can be carried out directly via the
multiple menu bars on the TV screen without interr upting
disc playback (except for Setup Menu (
), see “System
Setup (DVD)”).
Access to the menu bar
1Press SYSTEM MENU.
➜The menu bar will be displayed across the top of the TV
screen.
From the left,
User Preference Settings ™ Subtitle Language ™
Audio Language ™ Smar t Colour ™ Sound mode
From the left,
Frame by Frame ™ Slow Motion ™ Scan Speeds
™ Camera...

22
English
Searching for a particular passage
1Move to  in the menu bar and press 4.
2Use 1  2 to select the required search speed.
(1 = reverse)–32, –8 , –4
(2 = forward)+4, +8, +32
3To resume normal play, press ÉÅ.
Note:
– The sound will be muted during certain fast reverse or
forward search speeds.
Viewing from another angle (DVD)
Some DVDs include scenes recorded from different
camera angles.  The selections of angle depend on the disc
format.  Check the DVD disc case or disc menu for details
and...

23
English
Favourite Track Selection – FTS
– The FTS function allows you to store your favourite titles
and chapters (DVD) and favourite tracks and indexes
(VCD) for a par ticular disc in the system memor y.
– FTS programme can contain up to 20 items (titles,
chapters etc.).
– A programmed FTS will be placed on top of the list when
playback is activated.  When the list is full, a new
programme will replace the last programme on the list.
– The programme can be selected and played at any time.
To set up...

24
English
Special VCD / SVCD  features
Playback Control (PBC)
PBC playback allows you to play Video CDs interactively,
following the menu on the display.
To set PBC on / off

While playback is stopped, press DISC MENU to toggle
between “PBC ON” and “PBC OFF”.
When playing a disc with PBC,
If PBC is set to 
Off

Once the disc is loaded in the disc tray, it will star t playback
automatically.
If PBC is set to On

Once the disc is loaded in the disc tray, the PBC menu (if
available) will appear on the TV...

25
English
Radio Reception
RADIO RECEPTION
Plug and Play
Plug and Play allows you to store all available RDS stations
and radio stations automatically.
First time setup / power up
1When you turn on the power, AUTO INSTALL – PRESS
PLAY is displayed.
2PressÉÅ  on the system to star t installation.
➜INSTALL TUNER is displayed, followed by AUTO
PROGRAM.
➜The system will automatically store the radio stations
with sufficient signal strength, star ting from FM band and
followed by MW band.  Weak radio stations...

26
English
IMPORTANT!
When in Eco Power standby mode, it is not
possible to show the clock time or set the
clock / timer function.
Clock setting
The clock can be set in either 12-hour or 24-hour mode
(12:00 AM or 00:00, for example).
1In standby mode, press CLOCK•TIMER once.

While in the active source mode (DISC or TUNER, for
example), press CLOCK•TIMER twice.
2Press PROG repeatedly to select clock mode.
➜12:00 AM or 00:00 star ts flashing.
3Press S or T to set the hours and minutes.
To increase the...

27
English
Clock/Timer
Timer setting
The system can switch on to DISC or TUNER mode
automatically at a preset time, ser ving as an alarm to wake
you up.
IMPORTANT!
–Before setting the timer, ensure that the clock
is set correctly.
–The timer will always be switched on after it
has been set.
–The volume of the timer will increase gradually
to minimum level 12 or the last tuned volume
level.
1Hold down CLOCK•TIMER for more than two
seconds to enter timer mode.
➜The clock timer and 
 star ts flashing....

28
English
AMPLIFIER SECTION
Output power
  Stereo mode ....................................................................................   2 x 40 W RMS
  Surround mode ....................................................................   40 W RMS/channel
Total Harmonic Distor tion ............................... 10% at rated power (1 kHz)
Frequency Response .................................................. 100 Hz – 30 kHz / ±3 dB
Signal-to-Noise Ratio...

29
English
Troubleshooting
WARNING!
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty.
Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to
solve a problem by following these hints, consult Philips service centre.
Problem Solution
No power.– Check if the AC power cord is properly connected.
No picture.– Select the appropriate...