Philips Lx700 User Manual

LX700LX700Digital Home Cinema System
 

2
Important Note
Important notes for users in the U.K.
Mains plug
This apparatus is fitted with an approved 13 Amp plug.
To change a fuse in this type of plug proceed as follows:
1. Remove fuse cover and fuse.
2. Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or
BSI approved type.
3. Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it
should be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of
5 Amp....

3
English
Français
Español Deutsch Nederlands Italianlo Svenska Dansk Suomi
Português
Polski êÛÒÒÍËÈ


Index
INDEX
English -------------------------------------------------------- 4
Français ------------------------------------------------------ 17
Español ------------------------------------------------------ 30
Deutsch ----------------------------------------------------- 43
Nederlands ------------------------------------------------- 56
Italiano...

4
English
Introduction and General
Information
Features ............................................................................... 5
Supplied accessories ......................................................... 5
Environmental information .............................................. 5
Installation ........................................................................... 5
Maintenance ........................................................................ 5
Functional Overview
Front and Rear...

5
English
Features
The LX700 Digital Home Cinema System creates the same
dynamic sound qualities that you find in full-fledged cinemas
and incorporates some of the best features in home theatre
technology.
Features include:
Building-in DTS and Dolby® Digital decoder,
supporting Dolby® ProLogic II and virtual
surround
Use the Home Cinema Audio System for a movie-theatre
surround sound experience.
Additional Component Connections
Lets you connect other audio and audio/visual components
to the Receiver so...

6
English
C
57890 6
13 24
6 CHANNEL INPUT
1SURROUND
–to select multichannel surround(Dolby Digital, DTS,
Dolby Pro Logic or Dolby Pro Logic II) or stereo
sound effect.
2TUNING S  T
–to select the tuner frequency.
3BASS
–to select bass adjustment mode.
4TREBLE
–to select treble adjustment mode.
5STANDBY ON y
–to switch between power on and standby mode.
6 DISPLAY SCREEN
–shows the status of the system.
7 PROGRAM
–in Tuner mode, to program MW/FM stations.
8 SOURCE
–to select the desired source or external...

7
English
Notes:
–The keys in the following list operate exclusively for this
Receiver only.
1SOURCE
–to select the desired source (TV/AV, DISC, TUNER or
AUX).
41  2
–Press 1 / 2 to select a preset radio station.
5 S  /  T
–in Tuner mode, to tune to a lower or higher radio
frequency.
8SURROUND
–to select multichannel surround (Dolby Digital, DTS or
Dolby ProLogic II) or stereo sound effect.
9SOUND
–to select the various soundfield effects:CONCERT,
Remote   control
REMOTE CONTROL
Functional Overview
1
2...

8
English
IMPORTANT!
–Before connecting the AC power cord to the wall
outlet, ensure that all other connections have been
made.
–Never make or change any connections with the
power switched on.
–The type plate is located at the bottom of the
system.
Connecting the speakers
Press up (or down) the speaker’s jack and fully inser t the
stripped por tion of the speaker cable into the jack, then re-
lease.
Speakers
Front Left (L)
Front Right (R)
Center
Surround (Rear) Left (L)
Surround (Rear) Right (R)
Passive...

9
English
Connections
Connecting from a DVD and
additional components
To listen to playback from your DV D or SACD player.
Option 1
6 CHANNEL-DVD/SACD IN
Use the supplied audio cables to connect the 6 CHANNEL-
DVD/SACD IN jacks to the corresponding Multichannel
AUDIO OUT on your DVD or SACD player.
About 6 CHANNEL-DVD/SACD IN
The 6 CHANNEL-DVD/SACD IN can be used to connect
from a device with a built-in multichannel decoder (e.g.
Dolby, Digital,DTS, etc) and 6-channel output, i.e. a high
end DVD/SACD...

10
English
Connections Preparations
Notes:
–If the audio format of the digital input does not match
the capabilities of your Receiver, it will produce  a strong
distorted sound or no sound at all
– Always refer to the instruction manual of the connected
equipment to make an optimal connection
Recording from the digital output
It is possible to connect a digital recorder to the digital
output of the receiver. In this way, all signals coming from
the digital inputs can be recorded directly on the...