Philips Lx3950w User Manual

11
3139 115 22872
English
S-VIDEO
MW
FM/MW ANTENNA
FM  75
SCART
CVBS
1
2
➠
L
MW
antenna
fix the claw
into the
slot
Connections
Step 5: Connecting the
power cord
L
R L
R
AUDIO 
OUTS-VIDEO
IN
VIDEO INSCART IN~ AC MAINS
Step 4: Connecting FM/MW
antennas
1
Connect the supplied MW loop antenna
to the MW jack.  Place the MW loop
antenna on a shelf or attach it to a stand
or wall.
2Connect the supplied FM antenna to the
FM jack.  Extend the FM antenna and fix
its ends to the wall.
For better FM stereo...

12
English
3139 115 22872
Connections (Optional)
Connecting a VCR or
Cable/Satellite Box
L
RL
R
FM/MW ANTENNA
AUDIO 
OUTS-VIDEO
IN
VIDEO INSCART IN
24
1
~ AC MAINS
3
VCR or Cable/
Satellite Box
Viewing and listening to the
playback
1Connect the VCR or Cable/Satellite Box
to the TV as shown.
2Connect the DVD system’s AUX IN
(R/L) jacks to the AUDIO OUT jacks on
the VCR or cable/satellite box.
Before starting operation, press AUX/DI
on the remote to select “AUX” in order
to activate the input source.Using...

13
3139 115 22872
English
Connecting digital audio
equipment
(for example)
CD Recorder
L
RL
R
Listening to the playback

Connect the DVD system’s DIGITAL
IN jack to the DIGITAL OUT jack on a
digital audio device.
Before starting operation, press AUX/DI
on the remote to select “DI” in order to
activate the input source.
Helpful Hints:
– Some DVDs are copy-protected.  You
cannot record the disc through a VCR or
digital recording device.
– You cannot hear or record the SACD or
MP3-CD playback if you use the...

14
English
3139 115 22872
Functional Overview
* = Press and hold the button for more than two seconds.
1STANDBY ON (B)
–Switches to Eco Power standby mode or
turns on the system.
–Led ON in Eco Power standby mode.
2Disc tray
3OPEN•CLOSE 0
–Opens/Closes the disc tray.
4System display panel
5SOURCE
–Selects the relevant active source mode:
DISC, TV, TUNER  or AUX/DI.
–DISC: switches to DISC source mode.
–TV: switches to TV source mode and/or
*to turn on the Philips TV (only on the
remote control).
–TUNER:...

15
3139 115 22872
English
Functional Overview
* = Press and hold the button for more than two seconds.
/5
ª
9
0
!
6
@
#
$
%
^
&
*
(
•
8
≥
!
§
∞
≤
¡
)
™
£
@ANGLE
–Select a DVD disc camera angle (if
available).
#SUBTITLE
–Selects a subtitle language.
$REPEAT
–Selects various repeat modes.
%REPEAT A-B
–Repeats a specific section on a disc.
^AUDIO
–Selects an audio language (DVD) or an
audio channel (CD).
&MUTE
–Mutes or restores the volume.
*PROG
–DISC: starts programming.
–TUNER: starts *automatic/ manual...

16
English
3139 115 22872
Step 1:Inserting batteries into
the remote control
1
3
2
1Open the battery compartment.
2Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
3Close the cover.
Using the remote control to operate
the system
1Aim the remote control
directly at the remote
sensor (iR) on the front
panel.
2Select the source you
wish to control by
pressing one of the
source select buttons
on the remote control
(for example TV,
TUNER).
3Then select the desired...

17
3139 115 22872
English
Getting Started
TIPS:To return to the previous menu, press 1.
To remove the menu, press SETUP.
Selecting the colour system that
corresponds to your TV
In order for a DVD to play on this DVD
system, the colour system of the DVD,
the TV and the DVD player should match.
Before changing the TV system, determine
the colour system of your TV.
1In disc mode, press SETUP.
2Press 2 repeatedly to select {VIDEO
SETUP PAGE}.
3Press 34 to highlight {TV TYPE}, then
press 2.
4Press 34 to...

18
English
3139 115 22872
Getting Started
TIPS:To return to the previous menu, press 1.
To remove the menu, press SETUP.
Step 3: Setting language
preferences
You can select your preferred language
settings so that this DVD system will
automatically switch to the language for
you whenever you load a disc.  If the
language selected is not available on the
disc, the disc’s default setting language will
be used instead.  The OSD (on-screen
display) language for the system menu will
remain as you set it,...

19
3139 115 22872
English
Getting Started
TIPS:To return to the previous menu, press 1.
To remove the menu, press SETUP.
Step 4:Setting the speakers’
channels
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers.  These adjustments let
you optimise the sound according to your
surroundings and setup.
IMPORTANT!
Press SURR button on the remote
to select Multi-channel surround
mode before adjusting the speaker
settings.
1Press Ç to stop playback, then press...

20
English
3139 115 22872
IMPORTANT!
–If the inhibit icon (ø or X) appears
on the TV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
–DVD discs and players are
designed with regional restrictions.
Before playing a disc, make sure the
disc is for the same zone as your
player.
–Do not push on the disc tray or
put any objects other than discs on
the disc tray.  Doing so may cause
the disc player to malfunction.
Playable discs
Your DVD home...