Philips Lx3700d User Manual

11
English
CONNECTIONS
Step 6: Connecting the power
cord
After everything is connected properly, plug in the
AC power cord to the power outlet.
Never make or change any connections with the power
switched on.
Step 7: Connecting a VCR or
Cable /Satellite Box
Viewing and listening to the playback
1Connect the VCR or Cable/Satellite Box to the TV as
shown.
2Connect the DVD system’s AUDIO IN-AUX jacks to the
AUDIO OUT jacks on the VCR or cable / satellite box.
Before star ting operation, press AUX/DI on the...

12
EnglishStep 8: Connecting digitalaudio equipment
Listening to the playback
1Connect the DVD system’s  DIGITAL IN jack to the
DIGITAL OUT jack on a digital audio device.
Before star ting operation, press  AUX/DI  on the remote to
select “ AUX-DI ” in order to activate the input source.
Recording (digital)
2 Connect the DVD system’s  DIGITAL OUT
(COAXIAL or OPTICAL)  jack to the DIGITAL IN jack
on a digital recording device (DTS-Digital Theatre System
compatible, with a Dolby Digital decoder, for...

13
EnglishAD905W Wireless  System
(Only for LX3750W)
The AD905W accessor y gives you the option for wireless
speaker connection.
Please check you have all the supplied par ts for your
AD905W wireless set:
–1 x AD905WT 
WIRELESS TRANSMITTER
–1 x AD905WA WIRELESS RECEIVER
–1 x 14V adapter
–1 x table stand
1Remove the PHILIPS cover from the AD905WA 
WIRELESS
RECEIVER
 as shown in Fig. 1, to access the connection
terminal. Connect your rear speaker terminals with the
corresponding color terminals on the...

14
English
Functional Overview
Front  panels
FUNCTIONAL OVERVIEW
1OPEN / CLOSE
– to open or close the disc tray.
2Disc Tray
3SOURCE
– to select the relevant active mode:  TV/AV, DISC, TUNER
or AUX/DI.
4SURROUND
– to select multichannel surround (Dolby Digital, DTS,  VSS
Dolby ProLogic or Dolby ProLogic II) or stereo sound
effect.
5PROGRAM
– in Disc mode, to program disc tracks.
– in Tuner mode, to program preset radio station.
6VOLUME
– to adjust the master volume.
Front view
T op view
Side view 7...

15
English
1MW / FM  ANTENNA
–connect to the MW loop antenna or FM antenna.
2AUDIO IN -AUX
–connect to the analog audio outputs of a TV or VCR.
3AUDIO OUT
–connect to the analog audio inputs of an external recording
device or amplifier.
4WOOFER LINE OUT
–connect to an active subwoofer (Optional).
5DIGITAL OUT - OPTICAL
–connect to an audio equipment with digital (optical) audio
input.
6DIGITAL OUT - COAXIAL
–connect to an audio equipment with digital (coaxial)
audio input.
Caution: Do not touch the inner...

16
English
1
2
3
4
5
6
7
8
9
04
5
&
*
(
)
!$ # @
¡ %
^
/ DI/ DI
Notes for remote control:
–First, select the source you wish to control by pressing one of
the source select keys on the remote control (DISC or TUNER,
for example).
–Then select the desired function (
É,  S , T for
example).
1SOURCE
–to select the relevant active mode:  TV/AV, DISC, TUNER
or AUX/DI.
–TUNER: toggles between FM and MW band.
–AUX/DI: toggles between AUX-ANA and AUX-DIG (Digital
Input) mode.
2DISC MENU (disc mode only)
–to...

17
EnglishInserting batteries into the
remote control
1Open the batter y compar tment.
2Place the batteries in the
compar tment with the correct
polarity as indicated by “+“ and
“-“ symbols.
3Close the cover.
CAUTION!
–Remove batteries if they are exhausted or will
not be used for a long time.
–Do not use old and new or different types of
batteries in combination.
–Batteries contain chemical substances, so they
should be disposed off properly.
PREPARATIONS
Preparations
Switching on the system
IMPORTANT!...

18
English
PREPARATIONS
System Setup (DVD)
The system setup is carried out via the TV, it enables you to
customize the DVD system to suit your par ticular
requirement. If the preferred options selected are not
available on a disc, then the disc’s own preference will be
used.
IMPORTANT !
To  access the System Setup menu, playback must
be stopped.
The default setting is underlined.
General operation
1Press  SYSTEM MENU .
➜
  icon will be highlighted in the menu bar on the
TV screen.
2Press  4 to activate...

19
English
PREPARATIONS
16:9
(Wide screen)
4:3 LB
(Letter Box)
4:3 PS
(Pan Scan)
 – TV System
Allows you to select the color system matching the
connected TV  set.
AUTO
–If the connected TV is multi system, select this
mode.The output format will be in accordance with the
video signal of the disc.
NTSC
–If the connected TV is NTSC system, select this mode. It
will change the video signal of a PAL disc and output in
NTSC format.
PA L
–If the connected TV is PAL system, select this mode. It
will change the...

20
English
PREPARATIONS
Setting the language 
  
–Audio
– Subtitle
– Disc Menu
● This is to select the audio language, subtitle language and
the language used on TV screen menus or DVD menus
which will always be used for ever y disc to be played back.
The default setting is English.
● If the language selected is not available on the disc, the
original language designated by each disc will be selected.
Setting the features 
–P arental
Enables setting of playback limitation level. Some DVDs may
have a...