Philips Lx3600d User Manual

							21
English
Repeat play mode
While playing a disc, press REPEAT to
select :
REPEAT CHAPTER (DVD)
–to repeat playback of the current
chapter.
REPEAT TRACK/TITLE (CD/VCD/DVD)
–to repeat playback of the current
track (CD/VCD)/title (DVD).
REPEAT ALL (CD/VCD/SVCD)
–to repeat playback of all the disc and
all the programmed tracks.
REPEAT OFF
–to cancel the repeat mode.
Helpful Hints:
–Repeat play might not work correctly with
some DVDs.
–For VCD, if the PBC mode is switched on,
repeat play is not possible.Repeat A-B  (DVD/VCD/CD)
1Press REPEAT A-B at your chosen
starting point.
2Press REPEAT A-B again at your chosen
end point.
➜The section A and B can be set only
within the same chapter/track.
➜The section will now repeat
continuously.
3To exit the sequence, press REPEAT
A-B.
Zoom
1Press ZOOM.
➜Use the 3 4 1 2 key to move
through the zoomed picture.
➜Playback will continue.
2Press ZOOM key repeatedly to return
to the original size.
Helpful Hint:
–The function is NOT available for some
DVD discs.
Disc Operations
 
						

							22
English
Disc Operations
Special DVD Features
Playing a Title
1Press RETURN/TITLE.
➜The disc title menu appears on the TV
screen.
2Use 341 2 keys or numeric keypad
(0-9) to select a play option.
3Press OK key to confirm.
Camera Angle
Press ANGLE repeatedly to select
different desired angle.
Changing the Audio Language
Press AUDIO repeatedly to select
different audio languages.
Changing the Audio Channel
For VCD
Press AUDIO to select the available
audio channels provided by the disc
(STEREO, LEFT MONO, RIGHT MONO
or MIX MONO).
Subtitles
Press SUBTITLE repeatedly to select
different subtitle languages.
Time Search
The Time Search function allows you to
start playing at any chosen time on the
disc.
1Press OSD.
2Press 3 4 to highlight time search box.
➜The on-screen display shows the total
playing time of the title/chapter.
3Press OK keys to select an option.
4Enter hours, minutes and seconds from
left to right in the time edit box using
remote control numerical key pad.
(e.g. 0:34:27)
For DVD
➜Title/Chapter Remain: displays the
remaining time of the current title/
chapter.
➜Title/Chapter Elapsed: displays the
elapsed time of the current title/chapter.
For Super VCD or VCD
➜Total/Single Remain: displays the
remaining time of the current total/single
track.
➜Total/Single Elapsed: displays the
elapsed time of the current total/single
track.
5Press the OK key to confirm.
➜Playback starts from the selected time
on the disc.
 
						

							23
English
Preview Function
1Press SCAN.
2Press 34 to highlight TRACK DIGEST,
DISC INTERVAL or TRACK INTERVAL.
3Press OK to open one option.
Select Digest Type:
Track Digest
Disc Interval
Track Interval
Track Digest
This function will minimise the picture of
every track in order to display every six
of these tracks on the screen to help you
know the content of every track on the
disc.
Disc Interval
This function is used to divide a disc into
six parts by regular intervals and display
them on one page to preview the whole
disc.
Track Interval
This function is used to divide a single
track into six parts by regular intervals
and display them on one page to help you
preview the selected track.
AB C
DE F
(example for 6 thumbnail pictures display)
4Press 3 4 1 2 to select a track or input
your selected track number next to
“SELECT”.
5Use S / T to open the previous or
next page.
6Press OK key to confirm.
To quit preview function:
➜ Press 3 4 1 2 to highlight EXIT and
press OK to confirm.
To return to preview menu:
➜Press 3 4 1 2 to highlight MENU and
press OK to confirm.
Disc Operations
Special VCD & SVCD Features
Playback Control (PBC)
For VCD with Playback Control (PBC)
feature (version 2.0 only)
In stop mode, press DISC MENU to
toggle between ‘PBC ON’ and ‘PBC OFF’.
➜If you select ‘PBC ON’, the disc menu
(if available) will appear on the TV.
➜Use the 
S / T or use the numeric
keypad (0-9) to highlight your selection
and press OK to confirm to select a play
option.
During playback, press DISC MENU;
➜ If PBC was ON, it will switch to OFF
and continue playback.
➜If PBC was OFF, it will switch to ON
and return to menu screen.
If you want to skip the index menu
and playback directly from the
beginning,
In stop mode, press DISC MENU key
on the remote control to switch off the
function.
 
						

							24
EnglishPlaying MP3/Picture disc
(Kodak, JPEG)
IMPORTANT!
You have to turn on your TV and set to
the correct Video In channel.  (See page
15 “Setting the TV”).
General Operation
1Load an MP3/Picture (Kodak Picture CD,
JPEG) disc.
➜The MP3/Picture CD menu appears on
the TV  screen.
2Use 3 4 to select the folder and press
OK to open the folder.
3Press 3 4 to highlight an option.
4Press OK to confirm.
➜The playback will start from the
selected file to the end of the folder.Playback selection
During playback, you can;
Press 
S / T to select another file in
the current folder.
Use 
1 2 3 4 on the remote to rotate/flip
the picture files.
Press 
Å repeatedly to pause/resume
playback.
In stop mode, you can;
Press REPEAT continuously to access
different ‘Play Mode’.
➜FOLDER: files will be played back once.
➜REPEAT ONE: one file being played
repeatedly.
➜REPEAT FOLDER: all files in one folder
being played repeatedly.
➜SHUFFLE: all files in the current folder
being played at random order.
Helpful Hints:
–It is normal to experience an occasional
“skip” while listening to your MP3 discs.
–Some files on Kodak or JPEG discs may be
distorted during playback due to the
configuration and characteristics of the disc .
Disc Operations
 
						

							25
English
Special MP3/JPEG features
IMPORTANT!
You have to turn on your TV and set to
the correct Video In channel.  (See page
15 “Setting the TV”).
Preview Function (JPEG)
This function shows the content of the
current folder or the whole disc.
1Press Ç during playback.
➜Thumbnails of 12 pictures appears on
the TV  screen.
2Press S / T to display the pictures
on the previous/next page.
3Use 1 2 3 4 to highlight one of the
picture and press OK to start playback,
or,
Move the cursor to highlight SLIDE
SHOW on the bottom of the page to
start playback from the first picture on
the current page.
4Press DISC MENU to return to MP3/
Picture CD menu.
Zoom picture (JPEG)
During playback, press ZOOM
repeatedly to display the picture with
different scales.
Use 
1 2 3 4 to view the zoomed picture.Playback with multi-angles (JPEG)
During playback, press 
3 4 1 2 to rotate
the picture on the TV screen.
3: flip the picture vertically
4: flip the picture horizontally
1: rotate the picture anti-clockwise
2: rotate the picture clockwise
Scan Effect (JPEG)
Press ANGLE repeatedly to choose
different scan effect.
➜Varies of scan effect appears on the
top left hand corner on the TV screen.
Playback control (MP3)
You can press 
S / T to change the
tracks.
JPEG and MP3 simultaneous
playback
1During MP3 playback, press DISC
MENU.
➜MP3/JPEG Navigator menu appears on
the TV screen (see page 33 “MP3/JPEG
Nav).
2Select a picture file to playback.
➜The picture will be played back in
sequence together with MP3 music.
3To quit simultaneous playback, press
DISC MENU followed by STOP.
➜The picture and MP3 music playback
will stopped.
Disc Operations
 
						

							26
English
DVD Menu Options
Basic Operations
1
Press SETUP in the STOP mode to
enter the Setup Menu.
2Press OK to enter the next level
submenu or confirm your selection.
3Press 1 2 to enter the submenu or
return to the previous menu.
4Press 34 to highlight the desired menu.
5Press SETUP to quit the setup menu.
➜The settings will be stored in the
player’s memory even if the player is
switched off.
General Setup menu
The options included in General Setup
menu are: Disc Lock, Program, OSD
Language and Screen Saver.
Follow the steps below:
- -   GENERAL  SETUP  PAGE   - -DISC LOCK  
PROGRAM  
OSD LANGUAGE 
SCREEN SAVER
1Press SETUP to enter the setup menu.
2Press 1 2 to select the General Setup
icon.
3Press OK to confirm.Program (not for Picture CD/MP3)
You can play the contents of the disc in
the order you want by programming the
tracks to be played. Up to 20 tracks can
be stored.
1Press 34 to choose ‘Program’ in the
General Setup Page.
2Press 2 to move the cursor to the
submenu to choose INPUT MENU.
3Press OK or PROG on the remote to
enter the programme page.
Program - cont’d
Input your favourite track
1Use the numeric keypad (0-9) to enter
a valid track number.
2Press 1 234 to move the cursor to the
next position.
➜If the track number is more than ten,
press 
T to open the next page and
proceed with programming or,
➜Use 1 2 3 4 to highlight NEXT, then
press OK.
3Repeat steps 1 - 2 to input another
track number.
Remove a track
1Press 1 234 to move the cursor to the
track you want to remove.
2Press OK or PLAY to remove this track
from the programme menu.
NOTE:
Some of the features in the DVD
Menu Options are described in
“Getting Started”.
 
						

							27
English
Program - cont’d
Playback tracks
1After complete programming, press 1
234 to move the cursor to the START
button.
2Press OK.
➜Playback will start with the selected
tracks under the programmed sequence.
Quit the program playback
1In the ‘Program’ menu, use 1 234 to
move the cursor to the EXIT button.
2Press OK to quit.Screen Saver
This function is used to turn the screen
saver on or off.
- -   GENERAL  SETUP  PAGE   - -DISC LOCK  
PROGRAM  
OSD LANGUAGE 
SCREEN SAVER ON
  OFF
1Press 34 to highlight ‘Screen Saver’.
2Enter its submenu by pressing 2.
3Move the cursor by pressing 34 to
highlight the selected item.
➜
On: In STOP or No DISC mode, if no
actions are performed about 15 minutes,
the screen saver will be activated.
➜
Off: Screen saver is disabled.
4Press OK, then press 1 to return to
General Setup Page.
DVD Menu Options
 
						

							28
EnglishAudio Setup Menu
The options included in Audio Setup
menu are: Speaker Setup and Analog
Output.
- -   AUDIO  SETUP  PAGE   - -SPEAKER SETUP
ANALOG OUTPUT
1Press SETUP.
2Press 1 2 to select the Audio Setup icon.
3Press OK to confirm.
Speaker Setup
This menu contains setup options for
your audio output which makes the
speaker setup system reproduce high
quality surround sound.
Night Mode
High volume outputs are softened, enabling
you to watch your favourite action movie
without disturbing others at night.
- -   SPEAKER  SETUP  PAGE   - -FRONT SPEAKERS 
CENTER SPEAKER 
REAR SPEAKERS 
SUBWOOFER
NIGHT MODE ON
    OFF
1Press 34 to highlight ‘Night Mode’.
2Enter its submenu by pressing 2.
3Move the cursor by pressing 34 to
highlight the selected item.
➜
On: Enable night mode.
➜
Off: Disable night mode.
4Press OK, then press 1 to return to
Audio Setup Page.
Analog Output
Set Analog Ouput to match your DVD
system’s playback capability and can be
accessed via the SURR button on the
remote control.
- -   AUDIO  SETUP  PAGE   - -SPEAKER SETUP
ANALOG OUTPUT STEREO
    MULTI CHANNEL
1Press 34 to highlight ‘Analog Output’.
2Enter its submenu by pressing 2.
3Move the cursor by pressing 34 to
highlight the selected item.
Stereo
➜Select this option when output
delivers sound from only the two front
speakers and subwoofer.
Multi-channel
➜Select this option to enable multi-
channel output
4Press OK, then press 1 to return to
Audio Setup Page.
DVD Menu Options
 
						

							29
English
DVD Menu Options
Video Setup Menu
The options included in Video Setup
menu are: TV Type, TV Display, Closed
Caption, Progressive and Picture Setting.
- -   VIDEO  SETUP  PAGE   - -TV TYPE  
TV DISPLAY 
CLOSED CAPTION
PROGRESSIVE 
PICTURE SETTING
1Press SETUP.
2Press 1 2 to select the Video Setup icon.
3Press OK to confirm.
TV Display
Set the aspect ratio of the DVD Player
according to the TV you have connected.
- -   VIDEO  SETUP  PAGE   - -TV TYPE  
TV DISPLAY  4:3 PAN SCAN
CLOSED CAPTION  4:3 LETTER BOX
PROGRESSIVE 16:9
PICTURE SETTING
1Press 34 to highlight ‘TV Display’.
2Enter its submenu by pressing 2.
3Move the cursor by pressing 34 to
highlight the selected item.
16:9
4:3
Letter Box
4:3
Pan Scan TV Display - cont’d
16:9
➜If you have a wide-screen TV.
4:3 Letter Box
➜If you have a normal TV. In this case, a
wide picture with black bands on the
upper and lower portions of the TV
screen will be displayed.
4:3 Pan Scan
➜If you have a normal TV and want both
sides of the picture to be trimmed or
formatted to fit your TV screen.
4Press OK, then press 1 to return to
Video Setup Page.
 
						

							30
English
DVD Menu Options
Closed Caption
Closed captions are data that are hidden
in the video signal on specific discs,
invisible without a special decoder. The
difference between subtitles and captions
is that subtitles are intended for hearing
persons and captions are for the hearing
impaired. For example, captions show
sound effects (e.g., “phone ringing” and
“footsteps”), while subtitles don’t.
Before you select this function, please
ensure that the disc contains closed
captions information and your TV set also
has this function.
- -   VIDEO  SETUP  PAGE   - -TV TYPE  
TV DISPLAY 
CLOSED CAPTION ON
PROGRESSIVE OFF
PICTURE SETTING
1Press 34 to highlight ‘Closed Caption’.
2Enter its submenu by pressing 2.
3Move the cursor by pressing 34 to
highlight the selected item.
➜
On: Enable Closed Caption.
➜
Off: Disable Closed Caption.
4Press OK, then press 1 to return to
Video Setup Page.
Progressive
This feature is only applicable if you have
connected this DVD system to a
Progressive Scan TV through the
Component Video jacks (see page 9.).
- -   VIDEO  SETUP  PAGE   - -TV TYPE  
TV DISPLAY 
CLOSED CAPTION
PROGRESSIVE ON
PICTURE SETTING  OFF
1Press 34 to highlight ‘Progressive’.
2Enter its submenu by pressing 2.
3Move the cursor by pressing 34 to
highlight the selected item.
➜
On: Enable Progressive.
➜
Off: Disable Progressive.
If ‘On’ is selected, a message will prompt
out to confirm selected option.
4Press OK, then press 1 to return to
Video Setup Page.
Notes on Progressive:
Ensure that your TV has progressive scan.
Connect with YPbPr video cable.
If no picture appears, wait 15 seconds for
auto recover.
To deactivate Progressive manually,
1Open the disc tray by pressing OPEN/
CLOSE 0.
2Press 1.
3Press MUTE.
➜DVD system will restore to the
interlace video output.
Helpful Hint:
–For TVs that may have separate YPbPr
inputs for P-Scan and non P-Scan video
signals, see page 38 “Troubleshooting”.