Philips Lx3600d User Manual

11
English
Connections
After everything is connected
properly,
1Set the VOLTAGE SELECTOR to the
local power line voltage.
2Plug in the AC power cord to the power
outlet.
Never make or change any connections
with the power switched on.
On the DVD system, press SOURCE
to select TUNER mode,
AUTO INSTALL PRESS PLAY may
appear on the display panel.  Press 
ÉÅ
on the front panel to store all available
radio stations or
press 
Ç to exit (see page 34 “Tuner
Operations”).
TEMIROPEN/CLOSE PLAY/PAUSE STOP...

12
English
Connections (Optional)
Connecting a VCR
~AC
MAINSFRONT
RIGHTCENTERFRONT
LEFTREAR
RIGHTREAR
LEFTSUB-
WSPEAKERS (4   )MW
FM/MW ANTENNA
FM  75
TV INLINE-OUT
AUDIO
S-VIDEOAUX-IN
LR
VIDEO OUTY
Pb PrCVBS
AUDIO 
OUTPr/CrPb/Cb
Y S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO 
OUTPr/CrPb/Cb
Y S-VIDEO
IN
VIDEO INCOMPONENT
VIDEO IN
ANT IN
TO TV
~ AC MAINS
1
24
3
VCR
Viewing and listening to the
playback
1Connect the VCR to the TV as shown.
2Connect the DVD system’s AUX IN
(R/L) jacks to the AUDIO OUT jacks...

13
English
Functional Overview
* = Press and hold the button for more than two seconds.
Main unit and remote control
1STANDBY ON (B)
–Switches to Eco Power standby mode or
turns on the system.
–Led ON in Eco Power standby mode.
2
Disc tray
3System display panel
4iR SENSOR
–Point the remote control towards this
sensor.
5
SOURCE
–Selects the relevant active source mode:
DISC, TV, TUNER  or AUX.
–DISC: to switch to DISC source mode.
–TV: to switch to TV source mode and/or
*to turn on the Philips TV (remote...

14
English
Functional Overview
* = Press and hold the button for more than two seconds.
Control buttons available on the
remote only
9
DISC MENU
–Enters or exits disc contents menu.
–For VCD version 2.0 only;
In stop mode, turns on/off playback
control (PBC) mode.
During playback, returns to main menu.
0
OSD (DISC source mode only)
–Enters or exits on-screen display.
!
1 2 3 4
–Selects movement direction in the menu.
–Use 1 2 to select a preset radio station.
–Use 3 4 to select auto tuning in Tuner...

15
English
Step 1:Inserting batteries
into the remote
control
1
3
2
1Open the battery compartment.
2Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
3Close the cover.
Using the remote control to operate
the system
1Aim the remote control
directly at the remote
sensor (iR) on the front
panel.
2Select the source you wish
to control by pressing one
of the source select
buttons on the remote
control (for example
TV, TUNER).
3Then select the desired
function (for...

16
EnglishSelecting the colour system that
corresponds to your TV
This DVD system is compatible with both
NTSC and PAL.  In order for a DVD to
play on this DVD system, the colour
system of the DVD, the TV and the DVD
system should match.
1Stop playback (if any) and press SETUP.
2Press 2 twice to select ‘Video Setup
Page’.
3Press 3 4 to highlight ‘TV Type’.
4Enter its submenu by pressing 2.
5Move the cursor by pressing 3 4 to
highlight one of the option below:
Multi – Select this if the connected TV is...

17
English
Getting Started
Step 4: Setting language
preference
You can select your preferred language
settings so that this DVD system will
automatically switch to the language for
you whenever you load a disc.  If the
language selected is not available on the
disc, the disc’s default setting language will
be used instead.  Except the DVD
system’s OSD language, it will remain
once selected.
Setting the OSD Language
1Stop playback (if any) and press SETUP.
2Press 2 to select ‘General Setup Page’.
3Press 3...

18
English
Getting Started
Language Code
Abkhazian 6566
Afar 6565
Afrikaans 6570
Albanian 8381
Amharic 6577
Arabic 6582
Armenian 7289
Assamese 6583
Avestan 6569
Aymara 6589
Azerhaijani 6590
Bashkir 6665
Basque 6985
Belarusian 6669
Bengali 6678
Bihari 6672
Bislama 6673
Bokmål, Norwegian 7866
Bosnian 6683
Breton 6682
Bulgarian 6671
Burmese 7789
Castilian, Spanish 6983
Catalan 6765
Chamorro 6772
Chechen 6769
Chewa; Chichewa; Nyanja 7889
Chinese 9072
Chuang; Zhuang 9065
Church Slavic; Slavonic 6785
Chuvash...

19
English
IMPORTANT!
–DVD discs and players are
designed with regional restrictions.
Before playing a disc, make sure the
disc is for the same zone as your
player.
–Depending on the DVD or
VIDEO CD, some operations may
be different or restricted.
–Do not push on the disc tray or
put any objects other than discs on
the disc tray.  Doing so may cause
the disc player to malfunction.
Playable discs
Your DVD home cinema system will
play:
–Digital Video Discs (DVDs)
–Video CDs (VCDs)
–Super Video CDs (SVCDs)...

20
English
Disc Operations
Basic playback controls
Unless stated, all operations described
are based on Remote Control control
use. Some operations can be carried out
using the DVD System Menu.
Pausing playback
1During playback, press Å.
➜Playback will pause and sound will be
muted.
2Press Å again to select the next picture
frame.
3To return to normal playback, press B.
Searching backward/forward
Press and hold 
S / T, then press B
to resume normal playback.
➜While searching, pressing 
S / T
again will...