Philips Hts9810 User Manual

English
EN     31
Play
Play musical slideshow
Play MP3/WMA music fi les and JPEG photo 
fi les simultaneously to create musical slideshow.  
The MP3/WMA and JPEG fi les must be stored 
on the same disc or USB device.
1 Play MP3/WMA music. 
2 Navigate to the photo folder/album and 
press u to start slideshow play.

  Slideshow begins and continues till the 
end of the photo folder or album.  

  Audio continues to play till the end of 
the disc.
To return to the menu, press BACK.
3 To stop slideshow play,...

32     EN
Play from portable media 
player
Simply connect your portable media player (e.g. 
MP3 player) to this unit to enjoy superb sound 
quality from your music collections.
MP3
1 Connect a 3.5mm stereo audio cable 
(supplied) from the MP3 LINK socket on 
this unit to the ‘headphone’ socket on your 
portable media player.
2 Press AUX/DI /MP3 LINK repeatedly until 
‘MP3 LINK’ is displayed.
3 Start play on your portable media player.
See chapter ‘Adjust Sound’ to enhance 
the audio output.
4 To stop...

English
EN     33
Play
 Note
This unit can store up to a maximum of 40 r adio 
stations.
If auto installation is not ac tivated or less than 5 
r adio stations are stored, ‘AUTO INSTALL’ will be 
displayed again the nex t time you turn on to r adio 
mode. 
If the FM r adio station tr ansmits RDS (Radio Data 
System) data , the name of the r adio station will be 
displayed.•
•
•
Listen to radio 
1 Press RADIO.
2 Use the remote control to control the 
radio. 
Button Action
Select a preset radio station.
m...

34     EN
6 Adjust sound
Control the volume
1 
Press VOL +- to increase or decrease 
the volume level.
To mute the volume, press H.
To restore the volume, press H again 
or press the volume button.
Adjust Bass/Treble
1 Press BASS / TREBLE.
2 Press VOL +-repeatedly to set the 
level for low (BASS) or high (TREBLE) 
tone.
 Note
If the volume control is not used within 10 seconds, it 
resumes nor mal volume control func tion. •
•
•
Select Ambisound
1 Press AMBISOUND repeatedly to select a 
best Ambisound...

English
EN     35
Adjust sound
Select a preset sound effect
1 Press SOUND repeatedly to select a 
sound effect that most suits the video or 
music you play.
Video /
Music / Descriptions
ACTION /
ROCK / 
Enhanced low and high 
range for great sounding 
movie effects and 
atmosphere.  Great for 
action movies and rock/pop 
music.
DRAMA /
JAZZClear mid and high range. 
Recreates the atmosphere 
of a live club with the artist 
just in front of you. Good 
for Jazz music and watching 
dramas.
CONCERT /...

36     EN
7 Adjust settings
This section describes the various setting 
options of this unit.  
Symbol Options
[ General Setup ]
 
[ Audio Setup ]
[ Video Setup ]
[ Preference Setup ]
General setup
1 
Press OPTIONS.

 [ General Setup ] menu is displayed.
2 Press B.
3 Select an option, then press OK.
General Setup
Screen Saver
DivX(R) VOD Code Sleep Timer Display DimDisc Lock
OSD Language EasyLink
Standby Mode
See the explanations of the above 
options in the following pages.
4 Select a setting, then...

English
EN     37
Adjust settings
[ Audio Input 
Mapping ]Map the audio input to 
the connected TV/
devices correctly to 
enable automatic 
switching of input source.  
Press OK to star t 
scanning of devices.
Select the audio input 
to map (e.g. AUX1 
Input, AUX2 Input), 
then press B.
Select the correct 
device that connected 
to this audio input, 
then press OK. 1.
2.
3.
 Note
Your T V and other connec ted devices must be 
compliant with HDMI CEC .
You must turn on the HDMI CEC oper ations on 
your T...

38     EN
[ DivX(R) VOD Code ]
Display the DivX® registration code.
   Tip
Enter this unit’s DivX registr ation code when you 
rent or purchase video from w w w.div x.com/vod.  
The DivX videos rented or purchased through the 
DivX® VOD ( Video On Demand) ser vice can be 
played only on the device to which it is registered.  •
Audio setup
1 
Press OPTIONS.

 [ General Setup ] menu is displayed.
2 Press V to select  [ Audio Setup ], then 
press B.
3 Select an option, then press OK.
Audio Setup
Ambisound...

English
EN     39
Adjust settings
[ Ambisound Setup ]
Change the Ambisound setup by selecting 
the room environment and rear speakers 
placement.  
   Tip
See chapter ‘Get Star ted - Star t Ambisound setup’ 
for detailed information.•
[ HDMI Audio ]
When you connect this unit and TV with 
HDMI cable, select the audio output 
setting for this connection.
[ On ] – the sound is output through 
both your TV and this speaker system. 
If the audio format on the disc is not 
supported, it will be downmixed to...

40     EN
[ Wireless ]
Set up the wireless system for the rear 
speakers to enable audio output in 
multichannel mode.
[ Pair Receiver ] – pair the receiver (in 
the left rear speaker) with the 
transmission signal code of the 
transmitter (in the subwoofer). 
To  s t a r t ,  p r e s s  OK.
Press CONNECT on the lef t rear 
speaker for 3 seconds. 
When pairing process is complete, 
press OK to confi rm and exit. 1.
2.
3.
[ Switch Channel ] – switch to another 
frequency channel to minimise 
interference...