Philips Hts8562 User Manual

11
English
6 Connect your home 
theater
This section helps you connect your home theater 
to a TV and other devices. 
For information about the basic connections of 
your
	 home 	 theater 	 and 	 accessories,
	
 see 	 the 	 quick 	
star

t guide. For a comprehensive interactive guide, 
see www.connectivityguide.philips.com. 
Note
 •For	identification	and	supply	ratings,	refer	to	t he type plate at the back or bot tom of the 
product.
 •Before you make or change any connections, 
make sure that all...

12
Automatic setup
When	you	set	up	the	home	theater	for	the	first	time, the setup menu prompts you to calibrate 
your speakers for the best surround sound. If you 
move your speakers or change the layout of the 
room, calibrate the speakers again to continue 
get ting the best sound.
Place the calibration microphone as close to the 
seating position as possible, at ear height. 
  
Before you start, check that:•	The calibration microphone is less than 5 
meters (16 feet) from each of the speakers. 
If it...

13
English
Wireless module - RWSS5510
Purchase the wireless module RWSS5510 (sold 
separately) from a Philips authorized dealer.
Wireless transmitter:
 
Wireless receiver:
  
Connectors
Connect other devices to your home theater.
Front
 
a  (USB)
Audio, video or picture input from a USB 
storage device.
b MUSIC iLINK•	Audio input from an MP3 player.•	Connect to the auto calibration 
microphone.
2 Press  ( Home ) on your home theater 
remote control, and select [Setup]  > 
[Audio]  > [Acoustic...

14
Rear right
  
a SD CARD-FOR VOD/BD-LIVE ONLYSlot for SD card. The SD card is used to 
rent
	
o
 nline 	 videos 	 and 	 access 	 BD-Live.
b VIDEO OUT-VIDEOConnect to the composite video input on 
t h e T V.
c LAN
C onnect to the L AN input on a broadband 
modem or router.
d ANTENNA FM 75 Signal input from an antenna, cable or satellite.
e HDMI OUT (ARC)TO TV Connect to the HDMI input on the T V. 
f HDMI IN 1/2Connect to the HDMI output on a digital 
device. 
Connect  to TV
Connect your home theater to...

15
English
  
2	 On	your	T V,	turn	on	HDMI-CEC .	For	details, see the T V user manual.
 »When y

ou play a disc on your home 
theater, the video is automatically 
displayed on TV and the audio is 
automatically played on the home theater. 
3 To play audio from T V programs through  your home theater, connect an additional 
audio
	 cable 	 (see 	 ‘Connect 	 audio 	 from 	 T V 	
a

nd 	 other 	 devices’ 	 on 	 page 	 17). 	
4 If audio from the T V does not play automatically on your home theater, set up...

16
  
1 Using a High Speed HDMI cable, connect the HDMI OUT connector on your digital 
device to the HDMI IN connector on your 
home theater.
2 Connect your home theater to the T V (see ‘Connect 	 to 	 T V ’ 	 on 	 page 	 14).
3	 On	the	connected	devices,	turn	on	HDMI-
C EC . For details, see the user manual of the 
devices.
4 If the T V is not HDMI CEC compliant,  select the correct video input on your T V.
5 Select the correct HDMI input on your home 	 theater 	 (see 	 ‘Set 	 up 	 audio 	 for 	
c...

17
English
  
Option 3: Connect audio through analog 
audio cables
Basic quality audio
Using an analog cable, connect the AUX 
connectors on your home theater to the 
AUDIO OUT  connectors on the TV or other 
device.
  
Set up audio for connected devices
When you connect a device to your home 
theater, check the audio settings.
1 On your T V and other devices, turn on  HDMI-CEC . 	 For 	 details, 	 see 	 the 	 user 	
m

anual of the T V and the other device.
2	 Select	‘Amplifier’	from	the	T V	speakers	m...

18
Set up the wired network
Connect your home theater to your router as 
shown below, and then switch on the devices.
  
1 Connect the home theater to a network router through a wired connection (see 
‘ Wired
	 connection’ 	 on 	 page 	 18).
2 Turn on your T V, and switch to the correct source for the home theater.
3 Press  (Home ).
4 Select  [Setup], and then press OK .
5 Select [Network]  > [Network Installation]  
> [Wired (Ethernet)] , and then press OK.
6 Follow the instructions on the T V to...

19
English
6 Follow the instructions on the T V to complete the setup.
 » The home theater connects to the 
inter

net. If connection fails, select  [Retry], 
and then press  OK.
7 Select [Finish], and then press OK  to exit.
Check wireless network settings
1 Press  (Home ).
2 Select  [Setup], and then press OK .
3 Select [Network]  > [View Wireless 
Settings], and then press OK .
 »The

	 current 	
Wi-Fi
 	 settings 	 are 	 displayed.
Name your home theater
To easily identify your home theater on a...

20
Auto volume
Turn the auto volume on to keep the volume 
constant when you switch to a different source. 
1 Press  SOUND SETTINGS.
2 Select AUTO VOLUME , and then press 
OK .
3 Press the Navigation buttons  (u p /d ow n) to 
select ON  or OFF.
4 Press  OK	 to 	 confirm.
Sound mode
Select	predefined	sound	modes	to	suit	your	v
ideo or music.
1 Press  SOUND SETTINGS .
2 Select SOUND, and then press OK .
3 Press the Navigation buttons  (u p /d ow n) to 
select a set ting on the display:
•	MOVIE : Enjoy a...