Philips Hts7540 User Manual

11
   
 
 
 
  
 
 
 
 
This speakers placement is for HTS7520 only.
   
Different set of speakers for HTS7500 and 
HTS7540. (see ‘Speci cations’ > ‘Speakers’).
   
  
 
 
 
 
 
 
1  Place this Home Theater System near to 
the TV
   
 
 
2  Place the speakers system at normal 
listening ear-level and directly parallel to 
the listening area.
   
 
 
3  Place the subwoofer at the corner of the 
room or at least 1 meter (3 feet) away 
from the T V.
  Tip
 
To avoid magnetic inter ference or unwanted   •...

12
   
 
 
 
Option 2: Connect to the component 
video jack
   
 
 
 
 
 
1  Connect the component video cable 
(not supplied) to the  Y Pb Pr 
 jacks on 
this Home Theater System and the 
COMPONENT VIDEO input jacks on the 
TV.
  Note
 
The component video input jack on the T V   •
might be labeled as  Y Pb Pr 
,  Y Cb Cr  
or  YUV 
.
   
This type of connection provides good picture 
  •
quality.
VIDEO OUT
PbPrY
PbPrY
 
Note
 
You must connect this Home Theater System   •
directly to a T V....

13
Connect speaker cables to 
speakers
   
 
 
 
 
 
 
1  Match the color of the cable to the 
terminal tab.
   
 
 
2  Press the terminal tab down and inser t 
the stripped end of the speaker cable, 
then release.
   
 
 
 
 
 
 
Connect speaker to speaker 
stand
   
 
For the speakers of HTS7540 and the front 
speakers of HTS7520 only
   
 
 
 
 
 
 
 
1  Attach the speakers to the speaker stands 
and secure the position with screws.
   
 
 
 
Option 3: Connect to the Video 
(CVBS) jack
   
 
 
 
 
 
1...

14
   
 
 
For HTS7520
 
 
 
 
  
 
 
 
 
 
 
1  Connect the speakers and subwoofer to 
the matching jacks on this Home Theater 
System.
  Note
 
Ensure that the colors of the plugs and jacks   •
are matched.
 
 
 
 
 
 
 
 
Connect speakers and 
subwoofer
   
 
For HTS7500 and HTS7540 (HTS7540 has a 
different set of speakers)
   
 
 
  
EN
 

15
Connect audio cables/other 
devices
   
Route the audio from other devices to this 
Home Theater System to enjoy audio play with 
multi-channel surround capabilities.
   
 
 
Connect audio from TV
 
 
(also used for EasyLink control)
 
 
  
 
 
 
 
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX1 
 jacks on this 
Home Theater System and the AUDIO 
output jacks on the T V. 
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘AUX1’...

16
Connect to coaxial jack 
 
 
  
 
 
 
 
1  Connect a coaxial cable (not supplied) 
to the  DIGITAL-IN-COAXIAL 
 jack 
on this Home Theater System and the 
COA XIAL /DIGITAL output jack on the 
device.
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘COA X IN’ is displayed on the 
display panel.
   
  
 
 
 
COAXIAL
DIGITAL OUT
COAXIAL
DIGITAL IN
Connect audio from a cable box, 
recorder or games console
   
You can choose to connect to analog or...

17
Connect portable media player
   
  
 
 
 
 
1  Connect a 3. 5mm stereo audio cable (not 
supplied) to the  MP3 LINK 
 jack on this 
Home Theater System and the phone 
jack on the por table media player (such as 
MP3 player).
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘MP3 LINK’ is displayed on the 
display panel. 
   
 
 
 
Connect USB device
 
 
  
 
 
 
 
1  Connect the USB device to   
 
 
 
USB 
 jack 
on this Home Theater System....

18
Connect power cord
  Warning
 
Risk of product damage! Ensure that the   •
power supply voltage corresponds to the 
voltage printed on the back or the underside 
of the product.
   
Before any connection to power outlet, set the 
  •
voltage selector (at the rear or bot tom of this 
product) to the local power line voltage.
   
 
 
1  Connect the power cord to the power 
outlet when all the required connections 
are done.
   
 
 
This product is ready to be set up for    »
use.
Connect LAN
   
Connect...

19
Navigate through the menu
   
 
 
1  Point the remote control directly at the 
remote sensor on the product and select 
the desired function.
   
 
 
2  Press the following buttons on the 
remote control to navigate through the 
on-screen menus.
  Button  Action
 
  
 
 /  
Move up or down
   
 /  
Move lef t or right
   
OK 
Con rm a selection
 
 
 
Enter numbers
   
 
Access to the Home 
menu.
   
 
 
 
 
Find the correct viewing 
channel
   
 
 
1 Press   
 ( Standby 
) to turn on this 
product....

20
  Tip
 
You can set the default language for DVD disc,   •
see (‘Adjust set tings’ > ‘ Video Setup’ >  [Disc 
Menu] 
).
 
 
 
 
 
 
Set up network
 
 
Follow the steps below to help you set up the 
network connection for software updates and 
enjoy BD-Live applications.
   
 
  
 
 
 
 
 
 
1  Connect the home theater to a 
broadband modem or router.
   
 
 
2  Turn on your T V and switch to the 
correct source for the home theater.
   
 
 
3 Press   
, select  [Settings] 
, and then press 
  OK 
....