Philips Hts6600 User Manual

							21
English
Optional Connections (c o n t i n u e d )
Mounting the speakers on the 
wall 
WARNING!
Only qualifi ed personnel can 
perform the installation. Never do it 
yourself in order to avoid any 
unexpected damage to the 
equipment or injury to personnel.
A Attach the supplied bracket to the rear of 
the speaker and use the screws to secure 
it. 
B Loosen the screw at the bottom of the 
speaker and remove the base stand.  
C Drill holes on the wall where the 
speakers are to be hung. Mount the 
rubber wall plugs and screws (not 
supplied) to the wall.
D Hook the speaker fi rmly onto the screws 
by sliding through the bracket’s key holes 
and lock into position.
A
B
C
D
 
						

							22
EnglishFinding the correct viewing 
channel
A Press SOURCE button on the main unit 
until ‘DISC SOURCE’ appears on the 
display panel (or DISC/USB on the 
remote control.)
B Turn on the TV and switch it to the 
correct video-in channel.  

						

							23
English
E Select { Speaker Distance } and press 
cursor right key.
Near
Default
Far Room Acoustics
Speaker Distance
Listening Position
F Select the distance between the two 
speakers and press OK to confi rm.

						

							24
EnglishSetting language preferences
The language options are different 
depending on your country or region.  It 
may not correspond to the illustrations 
shown in the user manual.
On-screen display (OSD) language
The OSD (On-Screen Display) language 
for this unit remains as you have set it, 
regardless of the changes made to the 
DVD disc language.
A In disc mode, press SETUP on the 
remote control.

						

							25
English
If the language you want is not 
available in the list, select { Others. }
Use the numeric keypad 0-9 on the 
remote control to enter the 4-digit 
language code ‘XXXX’ (see last page) and 
press OK to confi rm.
E Repeat steps C ~ D for other settings.
Helpful Hints:
– During DVD playback, you can switch the 
audio and subtitle languages by pressing the 
AUDIO and SUBTITLE buttons on the 
remote control.  However, this does not 
change the default settings you have made 
here.
– For some DVDs, the subtitle/audio/menu 
language can only be changed via the DVD 
disc menu.
Setting the TV Display
Set the aspect ratio of this unit according 
to the TV type you have connected. The 
format you select must be available on 
the disc.  If it is not, the setting for TV 
display will not affect the picture during 
playback.
A In disc mode, press SETUP on the 
remote control.
B Press cursor right key repeatedly to 
select { Video Setup Page. }
C Select { TV Display } in the menu and 
press cursor right key. 
Video Setup PageTV Type
TV Display
Picture Setting
HDMI Setup
Progressive
Closed Caption4:3 Pan Scan
4:3 Letter Box
16:9 Wide Screen
{ 4:3 Pan Scan } 
Select this if you have a 
conventional TV and 
want both sides of the 
picture to be trimmed or formatted 
to fi t your TV.
{ 4:3 Letter Box } 
Select this if you have a 
conventional TV.  In this 
case, a wide picture with 
black bands on the upper and lower 
portions of the TV will be displayed.
{ 16:9 Wide Screen } 
Select this if you have a 
wide-screen TV.
D Select one of the options and press OK 
to confi rm. 
Getting Started (c o n t i n u e d )
 
						

							26
English
Getting Started (c o n t i n u e d )
Setting up Progressive Scan 
feature
(for Progressive Scan TV only)
The progressive scan displays twice the 
number of frames per second than 
interlaced scanning (ordinary normal TV 
system.) With nearly double the number 
of lines, progressive scan offers higher 
picture resolution and quality.
Before you start...
Ensure that you have connected this unit 
to a progressive scan TV using the Y Pb 
Pr connection (see ‘Option 3: Connecting 
to a Progressive Scan TV or component 
video input’.)
A Turn on the TV to the correct viewing 
channel for this unit.

						

							27
English
Switching to different play 
source
z Press the SOURCE button on the main 
unit repeatedly to select:
   DISC  SOURCE 
						

							28
English
Disc Operations
Playable discs
Your DVD home theater system 
plays:
–  Digital Versatile Discs (DVDs)
– Video CDs (VCDs) 
–  Super Video CDs (SVCDs)
–  Finalized DVD Recordable (DVD±R),  
  DVD Rewritable (DVD±RW)
–  Audio Compact Discs (CDs)
–  MP3/ Windows Media™ Audio discs,
  picture (Kodak, JPEG) fi les on 
 CD-R(W)
 – ISO 9660
  –  JPEG resolution support up to 
     3072 x 2048
  –  Supported sampling frequencies : 
     32 kHz, 44.1 kHz, 48 kHz
  –  Supported Bit-rates : 32~256 (kbps),  
     variable bit rates (average 128 kbps)
–  DivX fi les on CD-R(W)/DVD+R(W):
 –  DivX 3/4/5/6, DivX Ultra
Region Codes for DVD discs
DVD discs and players are designed with 
regional restrictions. Before playing a disc, 
make sure the disc is for the same region 
as your player.  The regional code for this 
unit is indicated at the rear panel.Notes: 
–  If the inhibit icon (ø or X) appears 
on the TV when a button is pressed, 
it means the function is not 
available on the current disc or at 
the current time.
–  Never put any objects other than 
discs on the disc tray.  Doing so may 
cause the disc player to malfunction.
Playing a disc
A Press SOURCE repeatedly until ‘DISC 
SOURCE’ appears on the display panel 
(or press DISC/USB on the remote 
control.)
B Turn on the TV to the correct viewing 
channel for this unit.

						

							29
English
Disc Operations (c o n t i n u e d )
Basic playback controls
Pausing playback
z  During playback, press u.

						

							30
English
Disc Operations (c o n t i n u e d )
Programming disc tracks
(not for Picture CD/MP3) 
You can play the contents of the disc in 
the order you want by programming the 
playing order of the tracks. 
A Press SELECT/PROGRAM on the 
remote control.