Philips Hts6515 User Manual

							English
EN     11
Connect
3 Connect 
This section describes the basic connections 
required for this DVD Home Theatre unit 
before it can be used.  
Basic connections:
Place the unit 
Connect video cables
Connect speakers to subwoofer
Connect subwoofer
Optional connections:
Connect audio cables/other devices
Connect audio from TV
Connect audio from cable box/
recorder/game console
Connect portable media player
Connect USB device
Attach table stand to DVD Home Theatre 
unit 
Mount the DVD Home Theatre unit 
Mount the speakers. 
 Note
Refer to the type plate at the rear or bot tom of the 
produc t for identifi cation and supply ratings.
Before you make or change any connec tions, ensure 
that all the devices are disconnec ted from the power 
outlet.•
•
•
•
•
•
•
•
•
•
•
•
•
•
Place the unit
Place this unit on top of a table or mount it 
on the wall (see chapter ‘Mount the DVD 
Home Theatre unit’ and ‘Mount the 
speakers’).
Never place this unit in an enclosed cabinet.
Install this unit near the AC outlet where 
the AC power plug can be easily reached.
RIGHT
LEFT
1 Place this DVD Home Theatre unit near to 
the TV.
Attach the table stand to the DVD 
Home Theatre unit before place it on a 
table top.
2 Place the speakers at the normal listening 
ear-level and directly parallel to the 
listening area.
3 Place the subwoofer at the corner of the 
room or at least one metre away from the 
TV. 
 Note
To avoid magnetic interference or unwanted noise, 
never place the speaker s too close to the T V or any 
radiation devices.•
•
•
•
•
 
						

							12     EN
Connect video cables
This section describes how to connect this 
DVD Home Theatre unit to your TV so to 
enable viewing of disc play.
Select the best video connection that your TV 
can support.
Option 1: Connect to HDMI socket (for a 
HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to scart socket (for a 
standard TV).
Option 3: Connect to component video 
socket (for a standard TV or Progressive 
Scan TV).
 Note
You must connec t this unit direc tly to a T V.•
•
•
•
Before you connect
1 Push up the catch and remove the rear 
cover.  
2 Connect the cables to the corresponding 
sockets and direct the cables to the open 
hole on top.  
3 Once complete, close the rear cover. 
 Note
All the cables must be placed properly inside the rear 
panel in order for the rear cover to close.•
 
						

							English
EN     13
Connect
Option 1: Connect to HDMI socket 
HDMI INHDMI OUT
1 Connect a HDMI cable (not supplied) from 
the HDMI OUT on this unit to the HDMI 
IN socket on your TV.
 Note
The HDMI connec tor is only compatible with HDMI 
compliant T Vs and DVI-T Vs.•
   Tips
To optimise the video output, see chapter ‘Adjust 
set tings’ > [ Video Setup ] > [ HDMI Setup ] for 
details. 
This unit is HDMI CEC compatible.  It enables 
connec ted T V/device to control each other over 
HDMI, see chapter ‘Ac tivate EasyLink control’ for 
details. 
Use a HDMI/DVI adaptor in case your T V has only 
a DVI connec tion. An ex tr a audio connec tion is 
needed to complete this connection.
To route the audio from your T V to this DVD Home 
Theatre unit, connec t an audio cable from the audio 
input on this unit to the audio output on your T V.
This type of connec tions provide best pic ture quality.•
•
•
•
•
Option 2: Connect to Scart socket 
SCART
SCART
1 Connect a scart cable (supplied) from the 
SCART socket on this unit to the scart 
input socket on your TV.
   Tips
To listen to the audio output from your T V, press 
AUX /DI /MP3 LINK / repeatedly until ‘AUX SCART’ 
is displayed on the display panel.  
This type of connec tions provide good pic ture 
quality.•
•
 
						

							14     EN
Option 3: Connect to component 
video socket 
COMPONENT
VIDEO OUT
1 Connect the component video cable 
(supplied) from the COMPONENT 
VIDEO OUT socket on this unit to the 
component video input sockets on your 
TV.
If a progressive scan TV is used, you 
may turn on the progressive scan mode 
(see chapter ‘Turn on Progressive Scan’ 
for details).
   Tips
The component video input socket on your T V may 
be labelled as Y Pb/Cb Pr/Cr or YUV. 
This type of connec tions provide good pic ture 
quality.•
•
•
Connect speakers to 
subwoofer
RIGHTLEFT
1 Connect the left and right Ambisound 
speakers to the matching sockets on the 
subwoofer.
 Note
Ensure that the front por tion of the plug is fully 
inser ted into the socket.
To disconnec t the Ambisound speaker s, press down 
the catch on the plug before pulling out.•
•
 
						

							English
EN     15
Connect
Connect subwoofer
12
TO SUBWOOFER
3
1 Unwind the subwoofer’s interconnect 
cable at TO MAIN UNIT and connect it 
to the TO SUBWOOFER socket on this 
unit.
2 Connect the FM antenna (supplied) to the 
FM75Ω socket on the subwoofer (for 
some models, this cable has been 
connected).  Extend the FM antenna and 
fi x its ends to the wall.
3 Connect the power cord when all the 
required connections are done and you are 
ready to enjoy this DVD Home Theatre 
unit.
Connect audio cables/other 
devices
This section describes how you can route the 
sound from other devices to this this DVD 
Home Theatre unit in order to enjoy sound 
output or audio play with multi-channel 
surround capabilities.
Connect audio from TV 
(also used for EasyLink control)
1   Connect an audio cable (supplied) from 
the AUDIO IN-AUX1 sockets on this unit 
to the AUDIO OUT sockets on your TV. 
 Note
To listen to the audio output from this connec tion, 
press AUX /DI /MP3 LINK repeatedly until ‘AUX1 
INPUT’ is displayed on the display panel. •
 
						

							16     EN
Connect audio from cable box/
recorder/game console
You can choose to connect to analogue or 
digital socket depending on the device 
capabilities.
Connect to analogue sockets
1   Connect an audio cable (not supplied) 
from the AUDIO IN-AUX2 or AUX3 
sockets on the subwoofer to the AUDIO 
OUT sockets on the device. 
 Note
To listen to the audio output from this connec tion, 
press AUX /DI /MP3 LINK repeatedly until ‘AUX 2 
INPUT’ or ‘AUX3 INPUT’ is displayed on the display 
panel. •
Connect to digital socket
COAXIAL
DIGITAL IN
1   Connect a coaxial cable (not supplied) 
from the DIGITAL IN-COAXIAL socket 
on the subwoofer to the COAXIAL/
DIGITAL OUT socket on the device.
 Note
To listen to the audio output from this connec tion, 
press AUX /DI /MP3 LINK repeatedly until ‘DIGITAL 
INPUT’ is displayed on the display panel. •
 
						

							English
EN     17
Connect
Connect portable media player
MP3 LINK
MP3
1 Connect a 3.5mm stereo audio cable (not 
supplied) from the MP3 LINK socket on 
this unit to the phone socket on your 
portable media player (such as MP3 player).
 Note
To listen to the audio output from this connec tion, 
press AUX /DI /MP3 LINK repeatedly until ‘MP3 
LINK’ is displayed on the display panel. •
Connect USB device
1 Connect the USB device to  (USB) 
socket on this unit.
 Note
This DVD Home Theatre unit can only play/view 
MP3, WMA , DivX (Ultr a) or JPEG fi les that are 
stored on such devices.
To listen to the audio output from this connec tion, 
press USB.•
•
Attach table stand to DVD 
Home Theatre  unit 
1 
Ensure all the required cables are 
connected to this unit and close the rear 
cover.
2 Attach the table stand bracket to the rear 
of this unit.
Align the arrow indicators for correct 
positioning and placement.
Use the protrude panels to hold the 
table stand bracket.
Align Arrow 
With table Stand
Align Arrow 
With table Stand
Align Arrow 
With table Stand

A

A
A
A table stand bracket •
•
 
						

							18     EN
Mount the DVD Home 
Theatre unit 
 Caution!
Risk of per sonal injur y and damage to the unit.  
Allow only qualifi ed per sons to mount the unit.•
1 Ensure all the required cables are 
connected to this unit and close the rear 
cover.
2 Attach the big wall mount bracket to table 
stand bracket with screws.
A
B
A table stand bracket
B big wall mount bracket
3 Position the brackets on the wall, drill four 
screw holes and secure the brackets onto 
the wall with screws (not supplied).
4 Hook the DVD Home Theatre unit fi rmly 
onto the mounted bracket.  
5 Screw the supplied knob to the hole at the 
centre rear to secure the DVD Home 
Theatre unit to the bracket.
 
						

							English
EN     19
Connect
Mount the speakers 
 Caution!
Risk of per sonal injur y and damage to the unit.  
Allow only qualifi ed per sons to mount the unit.•
1 Loosen the screws at the bottom of the 
speaker to remove the speaker stand.
2 Attach the small wall mount bracket to the 
speaker with screws.
3 Fix two screws (not supplied) to the wall, 
then hook the bracket onto the screws 
and lock the speaker into position. 
 
						

							20     EN
4  Get started   
Prepare the remote control 
1 Push to open the battery compartment 
cover.
2 Insert two batteries type R03 or AAA.  
Match the indications (+-) inside the 
battery compartment.
3 Close the cover.
 Note
If you are not going to use the remote control for a 
long time, remove the bat teries.•
Control a play source
1 Select the source you wish to control by 
pressing the DISC, USB, RADIO or 
AUX/DI/MP3 LINK button.
2 Then select the desired function (for 
example í, ë). 
Navigate through the menu 
1 Point the remote control directly at the 
remote sensor on this unit and select the 
desired function.
2 Use the following buttons on the remote 
control to navigate through the on-screen 
menus.
Button Action
  v VMove up or down.
  b BMove left or right.
Confi rm a selection.
Enter numbers.