Philips Hts6510 User Manual

							41
English
Preference Setup Page (underlined options are the factory default settings)
Audio  Selects the preferred audio language for DVD playback.  
Subtitle  Selects the preferred subtitle language for DVD playback.
Disc Menu  Selects the preferred disc menu language for DVD playback.
Note:  If the selected audio/subtitle/disc menu language is not available 
on the DVD, the disc’s default language will be used instead.
PBC  Play Back Control feature is applicable for VCD/SVCD only.  It 
allows you to play Video CDs (2.0) interactively, following the 
menu on the display.  
{ On }   –  The index menu (if available) will appear on 
the TV when you load a VCD/SVCD.
{ Off }   –  The VCD/SVCD will skip the index menu and 
playback directly from the beginning.
MP3/JPEG Nav  MP3/JPEG Navigator can only be set if the disc is recorded with a 
menu.  It allows you to select different display menus for easy 
navigation.
{ Without Menu}  – Displays all the fi les contained in the MP3/
Picture disc.
{ With Menu }  –  Displays the folder menu of the MP3/Picture 
disc.
Note:  This DVD system can only display 650 fi les/folder in the directory.
Password  The password is used for the Disc Lock.  Enter your six-digit 
password to play a locked disc or when prompted for a 
password.  The default password is ‘136900’.  To change the 
password:
1) Press OK to access the change password menu.
2) Use the numeric keypad 0-9 on the remote control to 
enter your existing six-digit password at { Old Password }.
Note:  When doing this for the fi rst time or if you forget your existing  
password, key in ‘136900’.
3)  Enter the new six-digit password at { New Password }.
4)  Enter the new six-digit password again at { Confi rm PWD }.
5) Press OK to confi rm and exit the menu.
 
DVD Setup Menu Options (c o n t i n u e d )
 
						

							42
EnglishPreference Setup Page (underlined options are the factory default settings)
DivX Subtitle  Selects the font type that supports the recorded DivX subtitle.
{ Standard }   – Displays a standard list of Roman subtitle  
    fonts provided by this DVD system.
{ Central Europe }  – Displays Central Europe fonts.
{ Cyrillic }    – Displays Cyrillic fonts.
{ Greek }     – Displays Greek subtitle fonts.
{ Hebrew }   – Displays Hebrew fonts.
{ Chinese (Simp) }  – Displays Simplifi ed Chinese fonts.
{ Korean }    – Displays Korean fonts.
Default  This feature enables you to reset all the setup menu options and 
your personal settings to the factory defaults, except your 
password for the Disc Lock.  Press OK to confi rm the default 
reset.
DVD Setup Menu Options (c o n t i n u e d )
 
						

							43
English
Tu n e r  O p e r a t i o n s
IMPORTANT!
Make sure the FM and MW 
antennas are connected.
Tuning to radio stations
A Press SOURCE repeatedly until “FM” 
appears on the display panel (or press 
TUNER on the remote control).
B Press W / X briefl y on the remote 
control to start tuning.

						

							44
English
Tuner Operations (c o n t i n u e d )
B
 Press PLAY X until “START ...” appears 
on the display panel.

						

							45
English
Sound and Volume Controls
SURR.
SOUND
MUTE
Selecting surround sound
z Press SURR. to select : DOLBY+PL II 
(multi-channel) or STEREO.

						

							46
EnglishSoftware upgrades
Periodically Philips will issue software 
upgrades to enhance your user 
experience. 
Before you start ... 
Check the current software version of 
this DVD system:
1) Press EJECT 
ç.
2) Press DISPLAY on the remote 
control.    
A Visit the Philips website ‘www.philips.
com/support’ to check the availability of 
the latest software upgrade. Download 
the software to a CD-R.
B Insert the CD-R to the disc slot.

						

							47
English
Specifi cations
AMPLIFIER Output power:    500 W
Frequency Response:  20 Hz – 20 kHz / –3 dB
Signal-to-Noise Ratio: > 65 dB (CCIR)
Input Sensitivity 
- AUX In :        1000 mV
- TV In:         500 mV
- Digital In:       500 mV
TUNER Tuning Range:    FM 87.5–108 MHz (50 kHz)
              MW 531–1602 kHz (9 kHz)
26 dB Quieting 
Sensitivity:        FM 20 dB, MW 4μV/m
Image Rejection Radio:FM 25 dB, MW 28 dB
IF Rejection Ratio:    FM 60 dB, MW 45 dB
Signal-to-Noise Ratio: FM 60 dB, MW 40 dB
AM Suppression Ratio: FM 30 dB
Harmonic Distortion: FM Mono 3%
            FM Stereo 3%
            MW 5%
Frequency Response  FM 180 Hz–10 kHz / ±6 dB
Stereo Separation  FM 26 dB (1 kHz)
Stereo Threshold  FM 23.5 dB
DISC SECTIONLaser Type      Semiconductor
Disc Diametre  12cm / 8cm
Video Decoding  MPEG-1 / MPEG-2 /   
              / DivX 3/4/5/6, Ultra 
Video DAC      12 Bits
Signal System    PAL / NTSC
Video Format   4:3 / 16:9
Video S/N      60 dB 
Composite Video 
Output         1.0 Vp-p, 75Ω
S-Video Output  Y - 1.0 Vp-p, 75Ω
              C - 0.286 Vp-p, 75Ω
Audio DAC     24 Bits / 192 kHz
Frequency Response  4 Hz–20 kHz (44.1 kHz)
              4 Hz–22 kHz (48 kHz)
              4 Hz–44 kHz (96 kHz)
PCM         IEC 60958
Dolby Digital    IEC 60958, IEC 61937
DTS            IEC 60958, IEC 61937
MAIN UNITPower Supply Rating:  220–240 V; 50 Hz
Power Consumption: 100 W
Eco Standby power:   < 1 W
Dimensions:     340 x 70 x 330 (mm)
              (w x h x d)
Weight:         3.5  kg
Ambisound SPEAKERSSystem:         Full range satellite closed- 
            box system
Impedance:     8 Ω
Speaker drivers:  2.5” full range speaker
Frequency response:  120 Hz – 20 kHz 
Dimensions:     320 x 124 x 101 (mm)
              (w x h x d)
Weight:         2  kg/each
SUBWOOFER Impedance:     4 Ω
Speaker drivers:  203 mm (8”) woofer
Frequency response:  30 Hz – 120 Hz 
Dimensions:    220 x 370 x 470 (mm)
              (w x h x d)
Weight:         7  kg
Specifi cations subject to change without prior 
notice.
 
						

							48
English
Tr o u b l e s h o o t i n g
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, fi rst check the points listed below before taking the system for repair. If
you are unable to solve a problem by following these instructions, consult your dealer or
Philips for help.
No power.
No picture.
Completely distorted picture 
or black/white picture.
No sound or distorted sound.
No surround sound effect 
from the speakers.
The remote control does not 
function properly.–  Check if the AC power cord is properly connected.
– Press the 2(STANDBY ON) on the front of the 
DVD system to turn on the power.
–  Refer to your TV’s manual for correct Video In 
channel  selection. Change the TV channel until you 
see the DVD screen.
–  Press the DISC/USB button to select disc mode.
–  If this happens when you are turning on the 
progressive scan feature, wait for 15 seconds for the 
auto recovery.
–  If this happens when you are changing the setting of the  
‘TV TYPE’, wait for 15 seconds for the auto recovery.
–  Check the video connection.
–  Sometimes a small amount of picture distortion may  
 appear. This is not a malfunction.
– Clean the disc.
–  Adjust the volume.
–  Check the speaker connections and settings.
–  Make sure that the audio cables are connected and 
press the SOURCE button to select the correct input 
source (for example, TV or AUX/DI) to choose the 
device that you want to hear through the DVD system.
–  Press the SURR. button to select a correct surround 
sound  setting.
–  Make sure that the source you are playing is recorded or 
broadcast in surround sound (DTS, Dolby Digital, etc.).
–  Select the source you want to play (for example, 
DISC/USB or TUNER) before pressing the function 
button (X, ./ >).
–  Reduce the distance between the remote control and 
the system.
–  Replace the batteries with new ones.
–  Point the remote control directly toward the IR sensor.
–  Check that the batteries are loaded correctly. Problem (General)   Solution
 
						

							49
EnglishThe DVD system does not
start playback.
The aspect ratio of the screen 
cannot be changed even though 
you have set the TV display.
Cannot activate some features 
such as Angles, Subtitles, or 
multi-language Audio.
Not able to select some items 
in the setup/system menu.
Unable to play DivX movies.
Radio reception is poor.
The DVD system does not
work.–  Insert a readable disc with the playback side facing 
down. The DVD+R/CD-R must be fi nalised.
–  Check for any scratches or smudges on the disc.
–  Press SETUP to turn off the system setup menu  
 screen.
–  You may need to enter the password in order to 
change the parental control rating level or to unlock 
the disc for playback.
–  Moisture may have condensed inside the system. 
Remove the disc and leave the system turned on for 
about an hour.
–  The aspect ratio is fi xed on the DVD disc.
–  Depending on the TV, it may not be possible to 
change the aspect ratio.
–  The features may not be available on the DVD.
–  Changing the language for the sound or subtitle is  
 prohibited on this DVD.
–  Press STOP button twice before selecting the system 
setup menu.
–  Depending on the disc availability, some menu items 
cannot be selected.
–  Check that the DivX fi le is encoded in ‘Home 
Theatre’ mode with DivX certifi ed encoder.
–  If the signal is too weak, adjust the antenna or 
connect an external antenna for better reception.
–  Increase the distance between the system and your 
TV or  VCR.
–  Tune in to the correct frequency.
–  Place the antenna further away from any equipment 
that may be causing the interference.
–  Disconnect the power cord from the power outlet 
for a few minutes. Reconnect the power cord and try 
to operate again as usual.
Problem (Playback)   Solution
Tr o u b l e s h o o t i n g  (c o n t i n u e d )
 
						

							50
EnglishProblem (USB/HDMI/MP3 Direct)  Solution
Tr o u b l e s h o o t i n g  (c o n t i n u e d )
The contents of the USB fl ash 
drive cannot be read.
Slow operation of the USB 
fl ash drive.
No HDMI audio output.
No HDMI video output.–  The USB fl ash drive format is not compatible with the 
system.
–  Drive is formatted with a different fi le system which is 
not supported by this DVD system (e.g. NTFS).
–  Large fi le size or high memory USB fl ash drive takes 
longer time to read and display on the TV.
–   You will not hear any sound from the HDMI output if 
the source device is only DVI/HDCP (High-
bandwidth Digital Content Protection)-compatible.
–   It is not possible to output SACD or copy-controlled 
DVD-Audio sources from the HDMI connection.
–  HDMI connection can only be made to HDMI-
equipped devices with HDCP (High Bandwidth Digital 
Content Protection).  If you wish to connect to a DVI 
connector (equipped with HDCP), you will need a 
separate adaptor (DVI to HDMI).
–   Make sure the resolution of this DVD system matches 
the device you have connected using the HDMI.  See 
HDMI setting.