Philips Hts6510 User Manual

11
English
Remote Control (c o n t i n u e d )
13
14
15
16
17
18
20
21
22
23
24
25
19
m MP3-DIRECT 
–  Switches to MP3 mode for the source 
connected through the MP3 Direct 
socket at the front panel.
n SUBTITLE
–  Selects a DVD subtitle language.
o DISC MENU
–  For DVD, enters or exits disc contents 
menu.
–  For VCD/SVCD, enters digest menu. 
p W X S T
–  DISC: selects movement direction in the 
menu.
–  TUNER: press up or down to tune the 
radio frequency up/down.
–  TUNER: press left or right to...

12
English
Remote Control (c o n t i n u e d )
Using the remote control
A Open the battery compartment.
B Insert two batteries type R03 or AAA,
following the indications (+-) inside
the compartment.
C Close the cover.
D  Point the remote control directly at the 
remote sensor (iR) on the front panel.
E Select the source you wish to control by 
pressing the DISC/USB, TUNER, TV, 
AUX/DI or MP3 DIRECT button on the 
remote control.
F Then select the desired function (for 
example ., >).CAUTION!
–  Remove...

13
English
Basic Connections
Step 1:  Placing the speakers
The Philips Home Theatre System is 
simple to install.  However, proper 
system placement is critical to ensure an 
optimum sound experience.
A Place the Ambisound speakers at the 
normal listening ear level, equal distance 
from the TV and face straight ahead 
towards the listening area.  
B Place the subwoofer at the corner of the 
room.  Keep at least one metre away 
from the TV. 
Helpful Hints:
–  The placement diagram shown here is only 
a...

14
English
Step 2:  Connecting the 
Ambisound speakers and 
subwoofer 
z Connect the Ambisound speakers to the 
matching speaker sockets at the rear of 
the DVD system.  
Helpful Hints:
–  To prevent unwanted noise, do not place 
the Ambisound speakers too close to the 
DVD system, AC power adapter, TV or any 
other radiation sources.
–  To disconnect the Ambisound speakers, 
press down the catch before pulling out the 
cable.
Basic Connections (c o n t i n u e d )
TIPS: Before making or changing any...

15
English
Step 3:  Connecting to TV
This connection enables you to view the 
playback from this DVD system. You only 
need to choose one of the options 
below to make the video connection.
–  For a standard TV, follow option 1, 2 
or 3.
–  For a progressive scan TV, follow 
option 4.
–  For a HDMI TV, follow option 5.
IMPORTANT!
Connect the DVD system directly 
to the TV.
Helpful Hint:
–  If you are using the scart connection, you 
can press TV on the remote control to get 
the sound output from the...

16
English
Option 4: Connecting to a 
Progressive Scan TV or component 
video input
The progressive scan video quality is only 
available when using Y Pb Pr connection 
and a progressive scan TV is required. It 
provides superior picture quality when 
watching DVD movies.
A Follow option 1 to make the basic video 
connection. 
B Use the component video cables (red/ 
blue/green - not supplied) to connect the 
Y Pb Pr sockets on the DVD system to 
the corresponding component video 
input sockets (or...

17
English
Step 4:  Connecting the FM/
MW antennas
A Connect the supplied MW loop antenna 
to the MW socket.  Place the MW loop 
antenna on a shelf, or attach it to a stand 
or wall.
B Connect the supplied FM antenna to the 
FM socket.  Extend the FM antenna and 
fi x its ends to the wall.
For better FM stereo reception, connect 
an external FM antenna (not supplied).
Helpful Hints:
–  Adjust the position of the antennas for 
optimal reception.
–  Position the antennas as far away as 
possible from your...

18
English
TIPS: Refer to the respestive connected device’s user manual for other possible connections.TIPS: Before making or changing any connections, make sure that all the devices are disconnected 
from the power outlet.
Basic Connections (c o n t i n u e d )
FM 75MW
FM/MW ANTENNA
HDMI OUT~MAINSSUB-
WOOFERFRONT
LEFT FRONT
RIGHTRL
Step 5:  Connecting the 
power cord
After everything is connected 
properly, plug the AC power cord 
into the power outlet.
The Eco Power LED on the DVD system 
will light...

19
English
Connecting audio from an 
audio/video device
This DVD system provides analogue and 
digital audio connection. You can connect 
the audio output from an audio/video 
device (e.g. VCR, Cable/Satellite Box or 
TV) to this Home Theatre Audio System 
in order to enjoy the multi-channel 
surround sound capabilities.  
z  Use an audio cable (red/white - not 
supplied) to connect the AUX IN 
sockets on this DVD system to the 
AUDIO OUT sockets on the connected 
device.
To listen to the sound, press...

20
EnglishStep 1:   Turning on the DVD 
system
z Press the SOURCE button on the front 
panel repeatedly to select :
   DISC ¤ MP3 DIRECT ¤ FM ¤ MW ¤  
   TV ¤ AUX ¤ DI ¤ DISC .... 
Or
z Press DISC/USB, TUNER, TV, 
AUX/DI or MP3 DIRECT on the 
remote control.