Philips Hts6100 User Manual

English
EN     11
Connect
3 Connect 
This section describes the basic connections 
required for this DVD Home Theatre unit 
before it can be used.  
Basic connections:
Place the unit 
Connect video cables
Connect subwoofer
Optional connections:
Connect other devices
Connect audio from TV
Connect audio from cable box/
recorder/game console
Connect portable media player
Connect USB device
 Mount the DVD Home Theatre unit 
 Note
Refer to the type plate at the rear or bot tom of the 
produc t for identifi...

12     EN
Connect video cables
This section describes how to connect this 
DVD Home Theatre unit to your TV so to 
enable viewing of disc play.
Select the best video connection that your TV 
can support.
Option 1: Connect to HDMI socket (for a 
HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to scart socket (for a 
standard TV).
Option 3: Connect to component video 
socket (for a standard TV or Progressive 
Scan TV).
 Note
You must connec t this unit direc tly to a T V.•
•
•
•
Before you connect
1...

English
EN     13
Connect
Option 1: Connect to HDMI socket 
HDMI INHDMI OUT
1 Connect a HDMI cable (not supplied) from 
the HDMI OUT on this unit to the HDMI 
IN socket on your TV.
 Note
The HDMI connec tor is only compatible with HDMI 
compliant T Vs and DVI-T Vs.•
   Tips
To optimise the video output, see chapter ‘Adjust 
set tings’ > [ Video Setup ] > [ HDMI Setup ] for 
details. 
This unit is HDMI CEC compatible.  It enables 
connec ted T V/device to control each other over 
HDMI, see chapter ‘Ac...

14     EN
Option 3: Connect to component 
video socket 
COMPONENT
VIDEO OUT
1 Connect the component video cables (not 
supplied) from the Y P
B PR sockets on this 
unit to the component video input sockets 
on your TV.
If a progressive scan TV is used, you 
may turn on the progressive scan mode 
(see chapter ‘Turn on Progressive Scan’ 
for details).
   Tips
The component video input socket on your T V may 
be labelled as Y Pb/Cb Pr/Cr or YUV. 
This type of connec tions provide good pic ture 
quality.•
•...

English
EN     15
Connect
Connect audio cables/other 
devices
This section describes how you can route the 
sound from other devices to this this DVD 
Home Theatre unit in order to enjoy sound 
output or audio play with multi-channel 
surround capabilities.
Connect audio from TV 
(also used for EasyLink control)
1   Connect an audio cable (not supplied) 
from the AUDIO IN-AUX1 sockets on 
this unit to the AUDIO OUT sockets on 
your TV. 
 Note
To listen to the audio output from this connec tion, 
press...

16     EN
Connect to digital socket
COAXIAL
DIGITAL IN
1   Connect a coaxial cable (not supplied) 
from the DIGITAL IN-COAXIAL socket 
on the subwoofer to the COAXIAL/
DIGITAL OUT socket on the device.
 Note
To listen to the audio output from this connec tion, 
press AUX /DI /MP3 LINK repeatedly until ‘DIGITAL 
INPUT’ is displayed on the display panel. •
Connect portable media player
MP3
1 Connect a 3.5mm stereo audio cable (not 
supplied) from the MP3 LINK socket on 
this unit to the phone socket on...

English
EN     17
Connect
Mount the DVD Home 
Theatre unit 
 Caution!
Risk of per sonal injur y and damage to the unit.  
Allow only qualifi ed per sons to mount the unit.•
1 Ensure all the required cables are 
connected to this unit and close the rear 
cover.
2 Attach the supplied knobs to the rear of 
this unit.
3 Turn this unit over so that its bottom faces 
up.
4 Hold this unit fi rmly while removing the 
rubber feet by pushing it towards the back 
of this unit. Repeat the step to remove the 
other...

18     EN
6 Secure the bracket onto the wall with 
screws (not supplied).
7 Hook the DVD Home Theatre unit fi rmly 
onto the mounted bracket.  Slide the 
knobs through the key holes and lock into 
position.
 

English
EN     19
Get started
4  Get started   
Prepare the remote control 
1 Push to open the battery compartment 
cover.
2 Insert two batteries type R03 or AAA.  
Match the indications (+-) inside the 
battery compartment.
3 Close the cover.
 Note
If you are not going to use the remote control for a 
long time, remove the bat teries.•
Control a play source
1 Select the source you wish to control by 
pressing the DISC, USB, RADIO or 
AUX/DI/MP3 LINK button.
2 Then select the desired function (for...

20     EN
Find the correct viewing 
channel
 Note
Before you star t, remove the door stop tag on top of 
the disc compar tment door.•
1 Press 2 to turn on the DVD Home 
Theatre unit.
2 Press DISC to switch to disc mode
3 Turn on the TV and switch it to the 
correct video-in channel.  
You may go to the lowest channel on 
your TV, then press the Channel Down 
button on your TVs remote control 
until you see the Video In channel.
You may press ° button repeatedly 
on your TVs remote control.
Usually this...