Philips Hts5590 User Manual

19
Play from radioThe home theater can store up to 40 radio stations.1  Check that the FM antenna is connected.2 Press  RADIO.
»“AUTO INSTALL...PRESS PLAY’ appears 
on the display panel if you have not 
installed any radio stations. Press  
 ( Play).
3  Press the following but tons to control play:Button  Action /
Selects a preset radio station.
Navigation 
buttons
(left/right)Searches for a radio station.
Navigation 
buttons
(u p /d ow n)Fine tunes a radio frequency.Press and hold to erase the 
preset...

20
Listen to music1  Dock your  iPod or iPhone  (see ‘Dock your 
iPod or iPhone’ on page  20 ).2 Press  DOCK for iPod on the home theater 
remote control.
»The playlists are displayed on the TV.3  Press the  Navigation buttons and  OK to 
select and play tracks.Watch video or view slideshows
Note
•On iPod, enable the T V ON set ting.•On iPhone, select the T V Out option.
1  Dock your  iPod or iPhone  (see ‘Dock your 
iPod or iPhone’ on page  20 ).2  Switch the T V to the  AV/ V I D E O source...

21
6 Change settingsThis section helps you to change the settings of 
your home theater. 
Caution
•Most of the set tings are already confi gured 
with the best value for the home theater. 
Unless you have a specifi c reason to change a 
set ting, it is best to leave it at the default value.
Access the setup menu1 Press  
 ( Home).
2 Select  [Setup], then press  OK.
»The setup menu appears.3  Select a setup menu, then press  OK.
See the following sections for information 
about how to change the set tings...

22
Set up network1 Press  
 ( Home).
2 Select  [Setup], then press  OK.3 Select  [Network], then press  OK.4  Select and adjust the following set tings:•
[Network Installation] : Star ts 
wired (Ethernet) setup. Follow the 
instructions to set up the network 
connection.
•
[ View Network Settings] : Displays 
the current network set tings.
5 Press  OK to confi rm your choice.Set up EasyLink1 Press  
 ( Home).
2 Select  [Setup], then press  OK.3 Select  [EasyLink], then press  OK.4  Select and adjust the...

23
5 Press  OK to confi rm your choice. 
Note
•If your preferred disc language is not available, 
you can select  [Other] from the list and enter 
the 4-digit language code which can be found 
at the back of this manual. •If you select a language that is not available 
on a disc, the home theater uses the default 
language of the disc.
Change advanced settings1 Press  
 ( Home).
2 Select  [Setup], then press  OK.3 Select  [Advanced], then press  OK.4  Select and adjust the following set tings:•
[BD-Live...

24
Update software from a USB1  Check for the latest sof tware version on 
www.philips.com/support.•
Search for your model and click on 
‘software and drivers’.
2  Create a folder named ‘UPG’ in the root 
director y of your USB storage device.3  Download the sof tware into the ‘\UPG’ 
folder of the USB storage device.4  Unzip the sof tware in the ‘\UPG’ folder.5  Connect the USB storage device to the 
home theater.6 Press  
 ( Home) and select  [Setup].
7 Select  [Advanced] >[Software Update] > 
[USB].8...

25
•Input sensitivity:
•
AUX: 50 0 mV
•
MP3 LINK: 300 mV
Video
•Signal system: PAL / NTSC
•Component video output: 480i/576i, 
480p/576p, 720p, 1080i
•HDMI output: 480i/576i, 480p/576p, 720p, 
1080 i, 1080 p, 1080 p24
Audio
•S/PDIF Digital audio input:
•
Coaxial: IEC 60958-3
•Sampling frequency:
•
MP3: 32 kHz, 44.1 kHz, 48 kHz
•
WMA: 44.1 kHz, 48 kHz
•Constant bit rate:
•
MP3: 112 kbps - 320 kbps
•
WMA: 48 kbps - 192 kbps
Radio
•Tuning range: 
•
Europe/China: 
FM 87. 5-108 MHz (50 kHz)
•
Asia Pacifi...

26
9 Troubleshooting
Warning
•Risk of electric shock . Never remove the 
casing of the product. 
To keep the warranty valid, never tr y to repair the 
product yourself. 
If you have problems using this product, check the 
following points before you request ser vice. If you 
still have a problem, register your product and get 
suppor t at www.philips.com/welcome. 
If you contact Philips, you will be asked for the model 
and serial number of your product. The model 
number and serial number are on the...

27
DivX subtitles do not display correctly.
•Ensure that the subtitle fi le name is the 
same as the movie fi le name.
•Select the correct character set: 1) Press 
 OPTIONS /
 ( Options). 2) Select 
[Character Set]. 3) Select the suppor ted 
character set. 4) Press  OK.
The contents of a USB storage device cannot be 
read.
•Ensure that the format of the USB storage 
device is  compatible with the home theater 
(see ‘Product specifi cations’ on page  25 ).
•Ensure that the USB storage device 
is format ted...

28
10 Index33D video16 Aamplifi er25 
audio
connection  11  
language  23 
settings  22 
synchronize with video   15 
audio input mapping20 ,22 BBD-Live
access  16 
set up   12 
Bonus View16 
Browse
PC  19 Ccare4
change settings21 
chapter17 
connect
audio from T V   11 ,20 
guide  9
network  12 
other devices   11  
TV  10 
wireless module   13  
connectors9
contact us26Ddisc
play  15 
suppor ted discs   25 
disposal of your product5
DivX
character set   17 
DLNA18  The audio is interrupted when I play...