Philips Hts5561 User Manual

31
English
5 Back in the Twonky Media screen, select Basic Setup and Sharing.
 »The Sharing screen is displayed.
  
6 Browse and select folders to share, and then select Save Changes.
 »Your Macintosh rescans the folders automatically so that they are ready to share.
Play files from your PC
Note
 •Before you play multimedia content from the computer, make sure that the home theater is connected to the home network , and the media ser ver sof tware is properly set up.
1 Switch your T V to the correct HDMI...

32
• To clear the tex t in the address bar, press  BACK.• To display the onscreen keyboard, follow the instructions on the screen.
3 Af ter you enter the URL, press the Navigation buttons to select the arrow nex t to the address bar, and then press OK to confirm.
4 While browsing internet, press  OPTIONS to access the address bar, shor tcut keys and other advanced options. 
5 Press  BACK to return to the previous page, or press  (Home) to exit.
Clear browsing history
Clear the browsing histor y to remove...

33
English
• If you move the card and format it in another device, your downloaded video is erased. Download your video again before you watch.
7 Press the play but tons on your remote control to play, pause, search, or stop the video.
EasyLink
The home theater suppor ts Philips EasyLink, which uses the HDMI-CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI can be controlled by a single remote control. 
Philips does not guarantee 100% interoperability...

34
8 Change settings
This section helps you to change the settings of your home theater. 
Caution
 •Most of the set tings are already configured with the best value for your home theater. Unless you have a reason to change a set ting, it is best to leave it at the default value.
Note
 •You cannot change a set ting that is grayed out. •To return to the previous menu, press  BACK. To exit the menu, press  (Home).
Picture
Change the picture set tings to suit your preferences.
Note
 •The best set ting is...

35
English
Sound
Change the sound settings to suit your preference.
HDMI audio
To hear an HDMI audio output from your T V, connect your home theater to the T V through an HDMI cable.
1 Press  (Home).
2 Select [Setup], and then press OK.
3 Select [Audio] > [HDM I Audio], and then press OK.
4 Select the following options, and then press OK:
• [Bitstream]: Enable bitstream output over HDMI. • [Auto]: Automatically select the best suppor ted audio format.• [Of f ]: Disable audio from the T V.
Audio post...

36
Disc subtitle
1 Press  (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Subtitle], and then press OK.
4 Select a subtitle language for discs, and then press OK.
Disc menu
1 Press  (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Disc Menu], and then press OK.
4 Select a menu language for discs, and then press OK.
Note
 •If your preferred disc language is not available, select [O thers] from the list, and enter the 4-digit language code found at the the end of...

37
English
5 Press OK to activate.
 »The home theater switches to standby after the specified time.
Screen saver
Automatically switch your home theater to screen saver mode if:
• it is in pause or stop mode, and • no but ton is pressed for 10 minutes.
1 Press  (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Screen Saver] > [On], and then press OK.
Display panel
Change the brightness of the home theater display panel.
1 Press  (Home).
2 Select [Setup], and then press OK.
3 Select...

38
Update software through USB
What you need• A USB flash drive, with at least 75MB of memor y. The USB flash drive must be FAT or NTFS format ted. Do not use a USB hard drive.• A computer with Internet access.• An archive utility that suppor ts the ZIP file format (for example, WinZip® for Microsof t® Windows® or Stufflt® for Macintosh®).
Step 1: Download the latest software
1 Connect a USB flash drive to your co m p u t e r.
2 In your web browser, go to w w w.philips.com/suppor t.
3 At the Philips...

39
English
10 Product 
specifications
Note
 •Specifications and design are subject to change without notice.
Region codes
The type plate on the back or bot tom of the home theater shows which regions it suppor ts.
 
Media formats
• AVCHD, BD, BD-R / BD-RE, BD-Video, DVD-Video, DVD+R /+RW, DVD-R /-RW, DVD+R /-R DL, CD-R /CD-RW, Audio CD, Video CD/SVCD, Picture files, MP3 media, WMA media, DivX Plus HD media, USB storage device
Count ry DVD   BD
Europe ,  
Unit ed Ki ngdom
Ko rea
 La tin Amer ica
 Aust...

40
.avi files in AVI container
Audio codecVideo codecBit rate
PCM, Dolby Digital, DTS core, MP3, WMA
DivX 3.11, DivX 4.x, DivX 5.x, DivX 6.x10 Mbps max
MPEG 1, MPEG 220 Mbps (peak 40 Mbps)
MPEG 4 ASP10 Mbps max
H . 26 4/AVC [email protected]/4.0; [email protected]/3.1/3.0
20 Mbps (peak 40 Mbps)
WMV920 Mbps
.divx files in AVI container
Audio codecVideo codecBit rate
PCM, Dolby Digital, MP3, WMA
DivX 3.11, DivX 4.x, DivX 5.x, DivX 6.x10 Mbps max
MPEG 1, MPEG 220 Mbps (peak 40 Mbps)
MPEG 4 ASP10 Mbps max
.mp4 or .m4v files in...