Philips Hts5560 User Manual

							19
Play from radioThe home theater can store up to 40 radio stations.1  Check that the FM antenna is connected.2 Press  RADIO.
»“AUTO INSTALL...PRESS PLAY’ appears 
on the display panel if you have not 
installed any radio stations. Press  
 ( Play).
3  Press the following but tons to control play:Button  Action /
Selects a preset radio station.
Navigation 
buttons
(left/right)Searches for a radio station.
Navigation 
buttons
(u p /d ow n)Fine tunes a radio frequency.Press and hold to erase the 
preset radio station.
Press to stop the installation of 
radio stations.
 OPTIONS /  ( Options)Manual: Press once to access 
program mode, and press 
again to store the radio station.
Automatic: Press and hold for 
fi ve seconds to reinstall radio 
stations.
RADIOToggles between stereo and 
mono sound.
Note
•AM and digital radio are not suppor ted.•If no stereo signal is detected, you are 
prompted to install the radio stations again.•For the best reception, place the antenna away 
from the T V or other sources of radiation.
Change tuning gridIn some countries, you can switch the FM tuning 
grid between 50 kHz and 100 kHz. Changing the 
tuning grid erases all preset radio stations.1 Press  RADIO.2 Press  
 ( Stop).
3  Press and hold  
 ( Play) to toggle between 
100 kHz and 50 kHz frequency.
6 Select  Advanced options, then add the 
folders to share.7 Select  Library >Apply Media Information 
Changes to activate the changes.
In Macintosh OS X Twonky Media (v4.4.2)1  Connect the home theater to a network 
router  (see ‘Connect to a computer 
network and the Internet’ on page  12 ).2  Switch on the Macintosh and router.3  Visit w w w.twonkymedia.com to purchase 
the sof tware or download a free 30 -day 
trial to your Macintosh.4  Open Twonk y Media on the Macintosh.
»The media sharing setting is turned on by 
default, thus enabling you to directly add 
folders for media sharing. 5 Select  Basic Setup >Sharing, then select 
set tings to add a folder location or add 
more folders.6 Select  Save Changes to activate the 
changes.Play multimedia content(For HTS5580 and HTS5590 only.)
Note
•Before playing multimedia content from the 
computer, ensure that the home theater is 
connected to the computer network and the 
media ser ver sof tware is properly set up.
1 Press  
 ( Home).
»The home menu appears.
2 Select  [browse PC], then press  OK.
»A content browser appears.3  Select a fi le, then press  OK.4  Press the playback but tons to control  play 
(see ‘Play a disc’ on page  15 ).
English
EN
 
						

							20
Listen to music1  Dock your  iPod or iPhone  (see ‘Dock your 
iPod or iPhone’ on page  20 ).2 Press  DOCK for iPod on the home theater 
remote control.
»The playlists are displayed on the TV.3  Press the  Navigation buttons and  OK to 
select and play tracks.Watch video or view slideshows
Note
•On iPod, enable the T V ON set ting.•On iPhone, select the T V Out option.
1  Dock your  iPod or iPhone  (see ‘Dock your 
iPod or iPhone’ on page  20 ).2  Switch the T V to the  AV/ V I D E O source 
(corresponding to the yellow composite cable).
»The TV screen goes blank.3  Browse on the iPod or iPhone screen to 
select videos or photos.4 Press  
 ( Play) to play the video and photos.
»The picture is displayed on the TV. 
Use Philips EasyLinkThe home theater suppor ts Philips EasyLink, 
which uses the HDMI CEC (Consumer 
Electronics Control) protocol. EasyLink-
compliant devices that are connected through 
HDMI connectors can be controlled by a single 
remote control. 
Note
•Philips does not guarantee 10 0% 
interoperability with all HDMI CEC devices.
1  Switch on the HDMI CEC operations on 
the T V and other connected devices. See 
the manual of the T V or other devices for 
details. 2 Press  
 ( Home).
3 Select  [Setup], then press  OK.
Play audio from TV or other 
devicesPress  
 SOURCE /AUDIO SOURCE repeatedly 
to select the audio output of the  connected 
device .
Play from an MP3 playerConnect and play audio fi les from an MP3 player 
or other external audio devices.1  Connect the MP3 player to the home 
theater as described in the Quick star t 
guide. 2 Press  
 SOURCE /AUDIO SOURCE
repeatedly until ‘ MP3 LINK’ appears on the 
display panel.
3  Press the but tons on the MP3 player to 
select and play audio fi les.Play from an iPod or iPhoneBy connecting and installing a Philips Dock for 
iPod/iPhone, you can use the home theater to 
play music, movies and photos from your iPod or 
iPhone.
Note
•Philips Dock for iPod/iPhone is sold separately.•You can charge your iPod/iPhone on the dock 
while the home theater is in iPod mode.
Dock your iPod or iPhone1  Connect the dock to the home theater and 
connect the yellow composite cable from 
the dock to the T V. For more information, 
see the Quick Star t provided with the dock.2  Switch on the iPod or iPhone and place it in 
the dock.3  On the home theater remote control, press 
 ( Home), then select  [browse iPod] and 
press  OK.EN
 
						

							21
6 Change settingsThis section helps you to change the settings of 
your home theater. 
Caution
•Most of the set tings are already confi gured 
with the best value for the home theater. 
Unless you have a specifi c reason to change a 
set ting, it is best to leave it at the default value.
Access the setup menu1 Press  
 ( Home).
2 Select  [Setup], then press  OK.
»The setup menu appears.3  Select a setup menu, then press  OK.
See the following sections for information 
about how to change the set tings of your 
home theater.4 Press  
 BACK to return to the previous 
menu, or press  
 to exit.
Note
•You cannot change a set ting that is grayed out.
Change video settings1 Press  
 ( Home).
2 Select  [Setup], then press  OK.3 Select  [Video], then press  OK.4  Select and adjust the following set tings:•
[TV Display]: Selects a picture display 
format to fi t the T V screen.
•
[HDMI Video]: Selects the HDMI 
video resolution.
•
[HDMI Deep Color]: Displays colors 
with more shades and hues when the 
video content is recorded in Deep 
Color and the T V suppor ts this feature.
•
[Component Video]: Selects the 
component video resolution. Copy-
protected DVDs can display only 
480p/576p or 480i/576i.
4 Select  [EasyLink] >[EasyLink], then press 
OK.5 Select  [On], then press  OK.6  You can now enjoy the following Philips 
EasyLink controls. One-touch play
When you play a disc, the T V automatically 
switches to the correct channel.
One-touch standby
When you press and hold  
 ( Standby) on the 
remote control, the home theater and all the 
connected HDMI CEC devices (if they suppor t 
one-touch standby) switch to standby mode 
simultaneously.
System Audio Control
When you play a device that has its audio 
output routed to the home theater, the home 
theater switches to the corresponding audio 
source automatically.
To use one-touch audio, enable this feature and 
follow the instructions on the T V to map the 
connected devices correctly to the audio input 
jacks of the home theater.
Audio Input Mapping
Updates audio input mapping if there are new 
devices connected.
English
EN
 
						

							22
Set up network1 Press  
 ( Home).
2 Select  [Setup], then press  OK.3 Select  [Network], then press  OK.4  Select and adjust the following set tings:•
[Network Installation] : Star ts 
wired (Ethernet) setup. Follow the 
instructions to set up the network 
connection.
•
[ View Network Settings] : Displays 
the current network set tings.
5 Press  OK to confi rm your choice.Set up EasyLink1 Press  
 ( Home).
2 Select  [Setup], then press  OK.3 Select  [EasyLink], then press  OK.4  Select and adjust the following set tings: •
[EasyLink] : Enables or disables 
EasyLink.
•
[One Touch Play] : Enables or disables 
One Touch Play.
If enabled, you can use the remote 
control to star t disc play in the 
home theater and the T V switches 
automatically to the correct channel.
•
[One Touch Standby] : Enables or 
disables One Touch Standby.
If enabled, the home theater can 
be switched off to standby by a 
remote control from the T V or other 
connected HDMI CEC devices.
•
[System Audio Control] : Enables or 
disables System audio control.
If enabled, follow the instructions on 
the T V to map the connected devices 
correctly to the audio connectors of 
the home theater. The home theater 
switches automatically to the audio 
source of the connected device.
•
[Audio Input Mapping] : Updates audio 
input mapping if there are new devices 
connected. 
5 Press  OK to confi rm your choice. 
•
[Blu-ray 3D video]: Selects the 
3-dimensional video output when you 
play a 3D video on your home theater. 
The home theater must be connected 
to a 3D T V through HDMI.
•
[Picture Settings]: Selects a predefi ned 
color set ting.
5 Press  OK to confi rm your choice.
Note
•The best set ting is automatically selected for 
the T V. If you change the set ting, ensure that 
the T V suppor ts the new set ting. •For set tings related to HDMI, the T V must be 
connected through HDMI.•For set tings related to progressive or 
component video, the T V must be connected 
through Component Video.
Change audio settings1 Press  
 ( Home).
2 Select  [Setup], then press  OK.3 Select  [Audio], then press  OK.4  Select and adjust the following set tings:•
[Night Mode] : Selects quiet or full 
dynamic sound. Night mode decreases 
the volume of loud sounds and 
increases the volume of sof t sounds 
such as speech.
•
[HDMI Audio] : Selects HDMI audio 
format or disables HDMI audio output 
for the T V.
•
[Speaker Setup] : Sets the volume level 
and distance of each speaker to obtain 
the best possible surround sound 
based on your room setup.
5 Press  OK to confi rm your choice.
Note
•For set tings related to HDMI, the T V must be 
connected through HDMI.•Night mode is available for Dolby encoded 
DVD and Blu-ray discs (for models suppor t 
Blu-ray playback).EN
 
						

							23
5 Press  OK to confi rm your choice. 
Note
•If your preferred disc language is not available, 
you can select  [Other] from the list and enter 
the 4-digit language code which can be found 
at the back of this manual. •If you select a language that is not available 
on a disc, the home theater uses the default 
language of the disc.
Change advanced settings1 Press  
 ( Home).
2 Select  [Setup], then press  OK.3 Select  [Advanced], then press  OK.4  Select and adjust the following set tings:•
[BD-Live Security] : Restricts or allows 
access to BD-Live.
•
[Enhanced Audio] : Enables or disables 
the audio post processing at the 
speaker output.
•
[Software Update] : Selects to update 
sof tware from the network or from 
USB storage device.
•
[Clear memor y] : Clears local memor y, 
delete the BD-Live fi les that you previously 
downloaded. If using an USB storage 
device, the local storage folder is ‘BUDA’.
•
[DivX
® VOD Code] : Displays the 
DivX VOD registration code for the 
home theater.
•
[Version Info.] : Displays the sof tware 
version for the home theater.
•
[Restore default settings] : Resets the 
home theater to the default set tings 
programmed at the factor y.
5 Press  OK to confi rm your choice.
Note
•You cannot restrict internet access on 
commercial Blu-ray discs. •Before you purchase DivX videos and play them 
on the home theater, register the home theater 
on w w w.div x.com using the DivX VOD code.•You cannot reset parental control set ting to its 
default value.
Note
•The connected devices must be connected 
through HDMI and switched on.
Change preference settings1 Press  
 ( Home).
2 Select  [Setup], then press  OK.3 Select  [Preference], then press  OK.4  Select and adjust the following set tings:•
[Menu language] : Selects the on-
screen display menu language.
•
[Audio] : Selects audio language for video.
•
[Subtitle] : Selects subtitle language for 
video.
•
[Disc Menu] : Selects menu language 
for video disc.
•
[Parental Control] : Restricts access to 
discs that are recorded with ratings. To 
play all discs irrespective of the rating, 
select level ‘8’.
•
[Screen Saver] : Enables or disables 
screen saver mode. If enabled, 
the screen enters idle mode af ter 
10 minutes of inactivity (for example, 
in pause or stop mode).
•
[Auto Subtitle Shift] : Enables or 
disables shif t subtitle. If enabled, 
it adjusts the subtitle position 
automatically to fi t the TV screen.
•
[Change Password] : Sets or changes 
a PIN code to play a restricted disc. 
Enter ‘ 0000’ if you do not have a PIN 
or if you have forgot ten your PIN.
•
[Display Panel] : Changes the 
brightness of the display panel.
•
[Auto St andby] : Enables or disables 
auto standby. If enabled, the home 
theater switches to standby af ter 30 
minutes of inactivity (for example, in 
pause or stop mode).
•
[VCD PBC] : Displays or skips the 
content menu for VCD and SVCD discs.
•
[Sleep Timer] : Sets a sleep timer to 
switch the home theater to standby 
af ter a specifi c time.
English
EN
 
						

							24
Update software from a USB1  Check for the latest sof tware version on 
www.philips.com/support.•
Search for your model and click on 
‘software and drivers’.
2  Create a folder named ‘UPG’ in the root 
director y of your USB storage device.3  Download the sof tware into the ‘\UPG’ 
folder of the USB storage device.4  Unzip the sof tware in the ‘\UPG’ folder.5  Connect the USB storage device to the 
home theater.6 Press  
 ( Home) and select  [Setup].
7 Select  [Advanced] >[Software Update] > 
[USB].8  Follow the instructions on the T V to 
confi rm the update.
»When complete, the home theater 
automatically switches off and restar ts.•
If not, disconnect the power cord for a 
few seconds and then reconnect it.
Caution
•Do not turn off the power or remove the USB 
storage device when the sof tware update is in 
progress because you might damage the home 
theater.
7 Update softwareTo check for new updates, compare the current 
software version of your home theater with the 
latest software version (if available) on the Philips 
web site.Check software version1 Press  
 ( Home).
2 Select  [Setup], then press  OK.3 Select  [Advanced] >[Version Info.], then 
press  OK.
»The software version is displayed.Update software from the 
network1  Prepare the internet  connection  (s e e 
‘Connect to a computer network and the 
Internet’ on page  12 ).2 Press  
 ( Home) and select  [Setup].
3 Select  [Advanced] >[Software Update] > 
[Network].
»If an upgrade media is detected, you are 
prompted to star t or cancel the update. 4  Follow the instruction on the T V to confi rm 
the update.
»When complete, the home theater 
automatically switches off and restar ts.•
If not, disconnect the power cord for a 
few seconds and then reconnect it.
Note
•If the home theater is unable to connect to the 
Philips ser ver, press  
 ( Home), select  [Setup] > 
[Network] >[Network Installation] to set up 
the network.
EN
 
						

							25
•Input sensitivity:
•
AUX: 50 0 mV
•
MP3 LINK: 300 mV
Video
•Signal system: PAL / NTSC
•Component video output: 480i/576i, 
480p/576p, 720p, 1080i
•HDMI output: 480i/576i, 480p/576p, 720p, 
1080 i, 1080 p, 1080 p24
Audio
•S/PDIF Digital audio input:
•
Coaxial: IEC 60958-3
•Sampling frequency:
•
MP3: 32 kHz, 44.1 kHz, 48 kHz
•
WMA: 44.1 kHz, 48 kHz
•Constant bit rate:
•
MP3: 112 kbps - 320 kbps
•
WMA: 48 kbps - 192 kbps
Radio
•Tuning range: 
•
Europe/China: 
FM 87. 5-108 MHz (50 kHz)
•
Asia Pacifi c/Russia/Latin America/India: 
FM 87. 5-108 MHz (50/100kHz)
•Signal-to-noise ratio: FM 50 dB
•Frequency response: 
FM 180 Hz-12. 5 kHz / ±3dB
USB
•Compatibility: Hi-Speed USB (2.0)
•Class suppor t: 
UMS (USB Mass Storage Class)
•File system: NTFS, FAT16, FAT32
•Maximum memor y suppor t: < 160GB
Main Unit
•Power supply:
•
Europe/Russia/China/India: 
220 -240V, ~50Hz
•
Latin America/Asia Pacifi c: 
110 -127 V/ 2 2 0 -24 0 V;  
~50 - 60Hz switchable
•Power consumption: 135 W
•Standby power consumption: < 0.9 W 
•Dimensions (WxHxD): 
435 x 58 x 358 (mm)
•Weight: 3.87 kg
8 Product specifications
Note
•Specifi cation and design are subject to change 
without notice.
Region code
The type plate on the back or bottom of the 
home theater shows which regions it suppor ts
Playback media
•AVCHD, BD-RE, BD-Video, DVD-Video, 
DVD+R /+RW, DVD - R /- RW, DVD+R /- R 
DL, CD-R /CD-RW, Audio CD, Video CD/
SVCD, Picture CD, MP3-CD, WMA-CD, 
DivX (Ultra)-CD, USB storage device
File Format
•Audio: .mp3, .wma, .wav
•Video: .avi, .div x, .mp4, .mk v, .mov, .wmv
•Picture: .jpg, .gif, .png
Amplifi er
•Total output power : 1000W RMS (30% 
THD)
•Frequency response: 20 Hz-20 kHz / ±3dB
•Signal-to-noise ratio: > 65 dB (CCIR) / 
(A-weighted)
Country
 DVD   BD
Europe,  
United Kingdom
Korea
 
Latin America
 
Australia,  
New Zealand
 
Russia, India
 
China
AAAACCCC
Asia Pacific, Taiwan,
English
EN
 
						

							26
9 Troubleshooting
Warning
•Risk of electric shock . Never remove the 
casing of the product. 
To keep the warranty valid, never tr y to repair the 
product yourself. 
If you have problems using this product, check the 
following points before you request ser vice. If you 
still have a problem, register your product and get 
suppor t at www.philips.com/welcome. 
If you contact Philips, you will be asked for the model 
and serial number of your product. The model 
number and serial number are on the back or 
bottom of your product. Write the numbers here: 
Model No. __________________________
Serial No. ___________________________Main unitThe buttons on this home theater do not work.
•Disconnect the home theater from the 
power outlet for a few minutes, then 
reconnect. PictureNo picture.
•Ensure that the T V is switched to the 
correct source for the home theater.
No picture on HDMI connection.
•Change the HDMI video set ting or wait for 
15 seconds for auto recover.
•Check if the HDMI cable is faulty. Replace 
with a new HDMI cable.
No picture on the Component (Y Pb Pr) 
connection.
•If the HDMI video connection is set to 
[Auto] or  [10 8 0p/24Hz], there is no video 
output through the component connection. 
Change the HDMI video set ting or remove 
the HDMI connection.
No high-defi nition video signal on the TV.
•Ensure that the disc contains high-defi nition 
video.
•Ensure that the TV suppor ts high-defi nition 
video. Subwoofer
•Impedance: 3 ohm
•Frequency response: 20 Hz-150 Hz
•Dimensions (WxHxD): 
196 x 395 x 342 (mm)
•Weight: 5.25~5.37 kg
•Cable leng th: 3 m
Speakers 
•
System: full range satellite
•
Speaker impedance: 3 ohm (center), 
5 ohm (Front /Rear)
•
Speaker drivers: 2 x 3” full range 
•
Frequency response: 150 Hz-20 kHz
•
Dimensions (WxHxD):
•
Center : 280 x 95 x 92 (mm)
•
Speaker : 100 x 280 x 115 (mm)
•
Tall speaker : 260 x 1101 x 260 (mm)
•
Weight : 
•
Center : 1.40 kg
•
Speaker: 0.98~1.05 kg/each
•
Tall speaker : 3.73~3.81 kg/each
•
Cable leng th:
•
Center : 2 m
•
Front: 3 m
•
Rear : 10 m
Laser Specifi cation
•Laser Type (Diode): InGaN/AIGaN (BD), 
InGaAIP (DVD), A IGaAs (CD)
•Wave leng th: 405 +5nm/-5nm (BD), 
650 +13nm/-10nm (DVD), 
79 0 +15n m /-15n m (C D)
•Output power (Max. ratings): 
20mW (BD), 7mW (DVD/CD)
EN
 
						

							27
DivX subtitles do not display correctly.
•Ensure that the subtitle fi le name is the 
same as the movie fi le name.
•Select the correct character set: 1) Press 
 OPTIONS /
 ( Options). 2) Select 
[Character Set]. 3) Select the suppor ted 
character set. 4) Press  OK.
The contents of a USB storage device cannot be 
read.
•Ensure that the format of the USB storage 
device is  compatible with the home theater 
(see ‘Product specifi cations’ on page  25 ).
•Ensure that the USB storage device 
is format ted with a fi le system that is 
suppor ted by the home theater.
‘No entry’ or ‘x’ sign appears on the TV.
•The operation is not possible.
EasyLink feature does not work.
•Ensure that the home theater is connected 
to a Philips brand EasyLink T V and that 
EasyLink is on .
I do not want my home theater to be switched 
on when I switch on my TV.
•This is the correct behavior for Philips 
EasyLink (HDMI-CEC). To make the home 
theater work independently,  switch off 
EasyLink .
I cannot access BD-Live features.
•Check the  network connection  (s e e 
‘Connect to a computer network and 
the Internet’ on page  12 ) or  ensure that 
the network has been set up  (see ‘Set up 
network ’ on page  12 ).
•Clear memor y storage.  (see ‘Change 
advanced set tings’ on page  23 )
•Ensure that the Blu-ray disc suppor ts 
BD-Live feature.
The video (movies, photos, video clips, etc.) 
contents of the iPod/iPhone do not display on TV.
•Video and photo browsing is not suppor ted, 
you can only browse the video and photo 
contents on the iPod/iPhone itself.
Cannot see pictures from my iPod/iPhone on the TV.
•Connect a yellow composite cable from the 
dock to the T V.
•Switch the T V to the  AV/ V I D E O
 source 
(corresponding to the yellow composite 
cable).
•Press  PLAY on the iPod or iPhone to star t 
the slideshow.
SoundNo sound.
•Ensure that the audio cables are connected 
and select the correct input source (for 
example,  
 SOURCE /AUDIO SOURCE)
for the device you want to play.
No sound on HDMI connection.
•You might not hear any sound if the 
connected device is not HDCP (High-
bandwidth Digital Content Protection) 
compliant or only DVI compatible. Use an 
analog or digital audio connection.
•Ensure that the  [HDMI Audio] is  enabled .
No sound from TV program.
•Connect an audio cable from the audio 
input on the home theater to the audio 
output on the T V, then press  
 SOURCE / 
AUDIO SOURCE repeatedly to select the 
correct audio source.
Distorted sound or echo.
•Ensure that the T V volume is muted or set 
to minimum if you are playing audio through 
the home theater.
Audio and video are not synchronized.
•1) Press  
 SOUND SETTINGS /
 ( Sound 
options) . 2) Press the  Navigation buttons
(lef t /right) repeatedly until  AUDIO SYNC
is displayed, then press  OK. 3) Press the 
Navigation buttons (up/down) to sync the 
audio with the video.
PlayDisc cannot be played. 
•Clean the disc.
•Ensure that the home theater suppor ts the 
disc  (see ‘Product specifi cations’ on page  25 ).
•Ensure that the home theater suppor ts the 
region code of the disc.
•For DVD±RW or DVD±R , ensure that the 
disc is fi nalized. 
DivX video fi les cannot be played.
•Ensure that the DivX fi le is encoded 
according to the ‘Home Theater Profi le’ 
with the DivX encoder.
•Ensure that the DivX video fi le is complete.
English
EN
 
						

							28
10 Index33D video16 Aamplifi er25 
audio
connection  11  
language  23 
settings  22 
synchronize with video   15 
audio input mapping20 ,22 BBD-Live
access  16 
set up   12 
Bonus View16 
Browse
PC  19 Ccare4
change settings21 
chapter17 
connect
audio from T V   11 ,20 
guide  9
network  12 
other devices   11  
TV  10 
wireless module   13  
connectors9
contact us26Ddisc
play  15 
suppor ted discs   25 
disposal of your product5
DivX
character set   17 
DLNA18  The audio is interrupted when I play music from 
my iPod or iPhone in the docking station. 
•Ensure that you have installed the latest 
fi rmware on your iPod or iPhone. For more 
information, refer to the suppor t website of 
your iPod or iPhone.
My 3D video plays in 2D mode.
•Ensure that your home theater is connected 
to your 3D T V through HDMI.
•Ensure that your disc is a Blu-ray 3D disc.
•Ensure that the  [Blu-ray 3D video] set ting 
is turned  on  (see ‘Change video set tings’ on 
page  21 ).
I see black video on my TV screen.
•Ensure that your home theater is connected 
to the T V through HDMI.
•Switch to the correct HDMI source on your 
TV.
EN