Philips Hts5540 User Manual

Register your product and get support at
www.philips.com/welcome
  EN User manual    
   
DA Brugervejledning
DE Benutzerhandbuch   
   
EL 	
 
    
   
ES Manual del usuario    
   
FI Käyttöopas   
   
FR Mode d’emploi    
   
IT Manuale utente     
 
 
 
NL Gebruiksaanwijzing
PL Instrukcja obsugi    
   
PT Manual do utilizador    
  SV Användarhandbok
TR Kullanm klavuzu    
HTS5540
HTS5550
 

1
   
8 Product speci cations    16 
   
9 Troubleshooting    17 
   
10 Index    19  
 
Contents
 
 
 
1 Notice     2 
 
 
Copyright   2 
   
Compliance   
2 
   
Mains fuse (UK only)     
2 
   
Trademarks   
2 
 
 
2 Important    3 
 
 
Safety   3 
   
Product care     
4 
   
Disposal of your old product and batteries   
4 
 
 
3  Your home theater     5 
 
 
Main unit     5 
   
Remote control     
5 
 
 
4  Connect your home theater     7 
 
 
Connectors   7 
   
Connect to the TV     
7...

2
   
 
 
 
 
Mains fuse (UK only)
 
 
This product is  tted with an approved moulded 
plug. Should it become necessar y to replace the 
mains fuse, this must be replaced with a fuse of 
the same value as indicated on the plug (example 
10A).
   
 
 
1  Remove fuse cover and fuse. 
 
 
 
 
2  The replacement fuse must comply with BS 
1362 and have the ASTA approval mark. If 
the fuse is lost, contact your dealer in order 
to verify the correct type. 
   
 
 
3  Re t the fuse cover.
 
Note
 
To conform...

3
   
 
 
 
 
 
 
 
2 Important
 
 
 
Read and understand all instructions before you 
use your home theater. If damage is caused by 
failure to follow instructions, the warranty does 
not apply.
   
 
 
 
Safety
 
 
 
Risk of electric shock or  re! 
   
Never expose the product and accessories    •
to rain or water. Never place liquid 
containers, such as vases, near the product. 
If liquids are spilt on or into the product, 
disconnect it from the power outlet 
immediately. Contact Philips Consumer...

4
   
 
 
 
 
 
 
Disposal of your old product 
and batteries
   
  
 
 
Your product is designed and manufactured with 
high quality materials and components, which can 
be recycled and reused.
   
  
 
 
When this crossed-out wheeled bin symbol is 
attached to a product it means that the product 
is covered by the European Directive 2002/96/
EC . Please inform yourself about the local separate 
collection system for electrical and electronic 
products.
   
Please act according to your local rules and...

5
   
 
 
 
 
 
 
Remote control
 
 
 
 
 
 
 
 
a   
 ( Standby-On ) 
   
 
 
Switches the home theater on or to 
• 
standby.
   
 
 
When EasyLink is enabled, press 
• 
and hold for at least three seconds 
to switch all connected HDMI CEC 
compliant devices to standby.
   
 
 
 
 
b   
 
 OPEN/CLOSE 
   
Opens or closes the disc compar tment.
 
 
 
 
c  SLEEP 
   
Switches the home theater to standby af ter 
the preset time selected.
n q r s t u v
m a
b
c
d
e
f
g
h
i
j
k
l
p
o
   
 
 
 
 
3  Your home...

6
   
 
 
u  OK 
   
Con rms an entry or selection.
 
 
 
 
v  Source buttons 
   
 
 
 
• AUDIO SOURCE 
: Selects an audio 
input source.
   
 
 
 
• RADIO 
: Switches to FM radio.
   
 
 
 
• USB 
: Switches to USB storage device.
   
 
 
 
• DISC 
: Switches to disc source.
 
 
 
 
d   
 
SETUP 
   
Accesses or exits the setup menu.
 
 
 
 
e   
  
  
 ( Navigation buttons )
   
 
 
Navigate menus.
• 
 
 
 
 
In video mode, press lef t or right to • 
fast backward or fast forward.
   
 
 
In radio...

7
   
 
 
c  AUDIO IN-AUX 
   
Connects to the analog audio output on the 
TV or an analog device. 
   
 
 
d  DIGITAL IN-COAXIAL 
   
Connects to the coaxial audio output on 
the T V or a digital device. 
   
 
 
e  SCART TO TV 
   
Connects to the scar t input on the T V. 
 
 
 
 
f  FM ANTENNA 
   
Connects the FM antenna for radio reception.
 
 
 
 
g  VIDEO OUT - VIDEO 
   
Connects to the composite video input on 
the T V. 
   
 
 
h  HDMI OUT 
   
Connects to the HDMI input on the T V. 
 
 
 
 
i...

8
   
 
 
 
Option 1: Connect audio through analog 
audio cables
   
(Cable not supplied)
 
 
 
 
 
 
 
 
Option 2: Connect audio through coaxial 
cable
  Note
 
The digital coaxial cable or connector might be   •
labeled  COAXIAL/DIGITAL OUT 
 or   
 
SPDIF OUT 
 
. 
 
 
(Cable not supplied)
 
 
 
 
 
 
 
 
 
Connect a wireless module
 
Note
 
When a wireless module is connected and   •
switched on, the rear speakers of the home 
theater will be muted and the rear surround 
sound output to the wireless...