Philips Hts5220 User Manual

19
Dock your iPod or iPhone1  Connect the dock to the home theater and 
connect the yellow composite cable from 
the dock to the T V. For more information, 
see the Quick Star t provided with the dock.2  Switch on the iPod or iPhone and place it in 
the dock.3  On the home theater remote control, press 
 
   ( Home 
), then select  [browse iPod] 
 and 
press  OK 
.
Listen to music1  Dock your  iPod or iPhone  
 (see ‘Dock your 
iPod or iPhone’ on page   
19  
) .2 Press  DOCK for iPod 
 on the home...

20
6 Change settings   
This section helps you to change the settings of 
your home theater. 
Caution
  • 
Most of the set tings are already con gured 
with the best value for the home theater. 
Unless you have a speci c reason to change a 
set ting, it is best to leave it at the default value.
Access the setup menu1 Press  
   ( Home 
).
2 Select  [Setup] 
, then press  OK 
.
  » 
 
 
 
The setup menu appears.3  Select a setup menu, then press  OK 
.
   
See the following sections for information...

21
Set up network1 Press  
   ( Home 
).
2 Select  [Setup] 
, then press  OK 
.3 Select  [Network] 
, then press  OK 
.4  Select and adjust the following set tings:• 
 
 
 
 
 
[Network Installation] 
 : Star ts wired 
(Ethernet) or wireless setup. Follow 
the instructions to set up the network 
connection.
• 
   
 
 
 
[ View Network Settings] 
 : Displays 
the current network set tings.
• 
   
 
 
 
[ View Wireless Settings] 
 : Displays the 
current Wi-Fi set tings.
5 Press  OK 
 to con rm your...

22
• 
   
 
 
 
[Auto St andby] 
 : Enables or disables 
auto standby. If enabled, the home 
theater switches to standby af ter 30 
minutes of inactivity (for example, in 
pause or stop mode).
• 
   
 
 
 
[VCD PBC] 
 : Displays or skips the 
content menu for VCD and SVCD 
discs.
• 
   
 
 
 
[Sleep Timer] 
 : Sets a sleep timer to 
switch the home theater to standby 
af ter a speci c time.
5 Press  OK 
 to con rm your choice. 
Note
  • 
If your preferred disc language is not available, 
you can select...

23
7 Update software   
To check for new updates, compare the current 
software version of your home theater with the 
latest software version (if available) on the Philips 
web site.Check software version1 Press  
   ( Home 
).
2 Select  [Setup] 
, then press  OK 
.3 Select  [Advanced] 
 >  [Version Info.] 
, then 
press  OK 
.
  » 
 
 
 
The software version is displayed.Update software from the 
network1  Prepare the internet  connection  
 (s e e 
‘Connect to a computer network and the 
Internet’ on...

24
8 Product 
specifications
Note
  • 
Speci cation and design are subject to change 
without notice.
   
 
 
Region code 
   
The type plate on the back or bottom of the 
home theater shows which regions it suppor ts
   
 
 
 
Playback media 
  • 
 
AVCHD, BD-RE, BD-Video, DVD-Video, 
DVD+R /+RW, DVD - R /- RW, DVD+R /- R 
DL, CD-R /CD-RW, Audio CD, Video CD/
SVCD, Picture CD, MP3-CD, WMA-CD, 
DivX (Ultra)-CD, USB storage device
   
 
 
 
File Format 
  • 
 
Audio: .mp3, .wma, .wav
  • 
 
Video: .avi,...

25
   
 
 
 
Subwoofer 
  • 
 
Impedance: 3 ohm
  • 
 
Speaker drivers: 165 mm (6. 5”) woofer
  • 
 
Frequency response: 20 Hz-150 Hz
  • 
 
Dimensions ( WxHxD): 196 x 395 x 342 
(m m)
  • 
 
Weight: 5.25 kg
  • 
 
Cable leng th: 4 m
   
 
 
 
Speakers  
• 
 
 
 
 
System: full range satellite
• 
 
 
 
 
Speaker impedance: 6 ohm
• 
 
 
 
 
Speaker drivers: 1 x 76 mm (3”) 
woofer + 25 mm (1”) tweeter 
• 
   
 
 
Frequency response: 150 Hz-20 kHz
• 
 
 
 
 
Dimension ( WxHxD): 114 x 316 x 114 
(m m)
•...

26
SoundNo sound.
  • 
 
Ensure that the audio cables are connected 
and select the correct input source (for 
example,  
   
SOURCE 
 /  AUDIO SOURCE 
) 
for the device you want to play.
No sound on HDMI connection.
  • 
 
You might not hear any sound if the 
connected device is not HDCP (High-
bandwidth Digital Content Protection) 
compliant or only DVI compatible. Use an 
analog or digital audio connection.
  • 
 
Ensure that the  [HDMI Audio] 
 is  enabled .
No sound from TV program.
  • 
 
Connect...

27
The audio is interrupted when I play music from 
my iPod or iPhone in the docking station. 
  • 
 
Ensure that you have installed the latest 
 rmware on your iPod or iPhone. For more 
information, refer to the suppor t website of 
your iPod or iPhone.
My 3D video plays in 2D mode.
  • 
 
Ensure that your home theater is connected 
to your 3D T V through HDMI.
  • 
 
Ensure that your disc is a Blu-ray 3D disc.
  • 
 
Ensure that the  [Blu-ray 3D video] 
 set ting 
is turned  on  
 (see ‘Change video...

28
Ffi le formats  24 HHDMI CEC (see Easylink)  20 IInternet 
   
BD-Live  15 
   
connect  12 
   
software update   23 
iPod 
   
connect  12 
   
play  19 
   
slideshow  19 Llanguage 
   
audio  16  ,  22 
   
disc menu   22 
   
on-screen display   22 
   
subtitle  16  ,  22 Mmedia server software 
   
set up   18 
MP3 
   
play  19 Nnetwork 
   
connect  12 
   
set up   12 
   
software update   23 Oone-touch play  20 ,  21 
one-touch standby  20 ,  21 
overview 
   
connectors  9 
   
main unit...