Philips Hts5200 User Manual

9
   
 
 
 
Change virtual surround mode
 
 
DVS (Dolby Vir tual Speaker) technology 
creates a highly compelling 5.1-channel listening 
experience from as few as two speakers.
   
  
 
 
Press  SURROUND 
 to switch surround sound or 
stereo sound.
   
 
 
 
Change treble or bass
 
 
Change the high frequency (treble) or low 
frequency (bass) set tings of the home theater to 
suit your video or music.
   
 
 
 
 
 
1 Press  TREBLE 
 or  BASS 
.
 
 
 
 
2 Press   
 
 +/- 
 within  ve seconds to increase...

10
   
 
 
 
 
Play from radio
 
 
 
The home theater can store up to 40 radio 
stations.
   
 
 
 
 
1  Check that the FM antenna is connected.
 
 
 
 
2 Press  RADIO 
.
   
 
 
“    »AUTO INSTALL...PRESS PLAY 
’ appears 
on the display panel if you have not 
installed any radio stations. Press  
  .
 
 
 
 
 
 
3  Press the following but tons to control play:
 
Button  Action
 
  
 /   
Selects a preset radio station.
   
 
 /   
Searches for a radio station.
   
 
  
Fine tunes a radio frequency....

11
   
 
 
 
Dock your iPod or iPhone
 
 
 
 
1  Connect the dock to the home theater and 
connect the yellow composite cable from 
the dock to the T V. For more information, 
see the Quick Star t provided with the dock.
   
 
 
2  Switch on the iPod or iPhone and place it in 
the dock.
   
 
 
 
 
 
Listen to music
 
 
 
 
1  Dock your  iPod or iPhone  
 (see ‘Dock your 
iPod or iPhone’ on page   11  
) .
 
 
 
 
2 Press  DOCK for iPod 
 on the home theater 
remote control. 
   
 
 
3  Browse on the...

12
   
 
 
 
 
 
 
Use Philips EasyLink
 
 
 
The home theater suppor ts Philips EasyLink, 
which uses the HDMI CEC (Consumer Electronics 
Control) protocol. EasyLink-compliant devices 
that are connected through HDMI connectors can 
be controlled by a single remote control. 
  Note
 
Philips does not guarantee 10 0%   •
interoperability with all HDMI CEC devices.
 
 
 
 
 
 
1  Switch on the HDMI CEC operations on 
the T V and other connected devices. See 
the manual of the T V or other devices for...

13
   
 
 
 
Change general settings
 
 
 
 
1 Press   
 
SETUP 
.
 
 
 
 
2 Select  [General Setup] 
, then press  OK 
.
 
 
 
 
3  Select and adjust the following set tings:
   
 
 
 
• [EasyLink Setup] 
 : Sets up EasyLink to 
enjoy easy controls of all the HDMI 
CEC compliant devices using a single 
remote  control  
 (see ‘Use Philips 
EasyLink ’ on page   
12  
) .
   
 
 
 
• [Disc Lock]  : Restricts play to disc. 
Password (PIN code) is required to 
unlock the disc before play.
   
 
 
 
•...

14
   
 
 
 
Change video settings
 
 
 
 
1 Press   
 
SETUP 
.
 
 
 
 
2 Select  [Video Setup] 
, then press  OK 
.
 
 
 
 
3  Select and adjust the following set tings:
   
 
 
 
• [TV System] 
 : Selects a T V system that 
is compatible with the TV.
   
 
 
 
• [TV Display] 
 : Selects a picture display 
format to  t the T V screen.
   
 
 
 
• [Picture Settings] 
 : Selects a 
prede ned color setting.
   
 
 
 
• [HDMI Setup] 
 : Selects HDMI video 
resolution and the wide screen display 
format...

15
   
 
 
 
 
8 Update software
 
 
To check for new updates, compare the current 
software version of your home theater with the 
latest software version (if available) on the Philips 
web site.
   
 
 
Check software version
 
 
 
 
 
1 Press   
 
SETUP 
.
 
 
 
 
2 Select  [Preference Setup] 
 >  [Version Info.] 
, 
then press  OK 
.
   
 
 
The software version is displayed.   »
 
 
 
 
 
 
 
 
 
 
Update software from a CD-R 
or USB
   
 
 
1  Check for the latest software version on...

16
   
 
 
 
 
 
Video 
   
Signal system: PAL / NTSC   •
   
HDMI output: 480i/576i, 480p/576p, 720p,    •
1080 i, 1080 p
   
 
 
 
Audio 
   
S/PDIF Digital audio input:   •
   
 
 
Coaxial: IEC 60958-3
• 
 
 
 
 
Sampling frequency:   •
   
 
 
MP3: 32 kHz, 44.1 kHz, 48 kHz
• 
 
 
 
 
WMA: 44.1 kHz, 48 kHz• 
 
 
 
 
Constant bit rate:   •
   
 
 
MP3: 112 kbps - 320 kbps
• 
 
 
 
 
WMA: 48 kbps - 192 kbps• 
 
 
 
 
 
 
 
Radio 
   
Tuning range:    •
   
 
 
Asia Paci c/Latin America: FM 87.5-108 
•...

17
   
 
 
 
 
10 Troubleshooting
 
Warning
 
Risk of electric shock . Never remove the   •
casing of the product. 
 
 
To keep the warranty valid, never tr y to repair the 
product yourself. 
   
If you have problems using this product, check the 
following points before you request ser vice. If you 
still have a problem, register your product and get 
suppor t at www.philips.com/welcome. 
   
 
If you contact Philips, you will be asked for the 
model and serial number of your product. The 
model number...

18
   
The contents of a USB storage device cannot be 
read.
   
Ensure that the format of the USB storage    •
device is  compatible with the home theater  
 
(see ‘Product speci cations’ on page   
16  
) .
   
Ensure that the USB storage device    •
is format ted with a  le system that is 
suppor ted by the home theater (note that 
NTFS is not suppor ted).
   
 
‘No entry’ or ‘x’ sign appears on the TV. 
   
The operation is not possible.   •
   
 
EasyLink feature does  not work.
   
Ensure that...