Philips Hts5120 User Manual

							9
Option 1: Connect audio through a digital 
coaxial cable
Note
The digital coaxial cable or connector might be  •labeled COA XIAL DIGITAL OUT or SPDIF OUT .
(Cable not supplied)
 
Option 2: Connect audio through a digital 
optical cable
Note
The digital optical cable or connector might be  •labeled SPDIF OUT  or OPTICAL OUT . 
(Cable not supplied)
  
Option 3: Connect audio through analog 
audio cables
(Cable not supplied)
 
TV
TV
TV
Option 3: Connect to the TV through 
composite video (CVBS)
Note
The composite video cable or connector might  •be labeled AV IN, VIDEO IN , COMPOSITE  or 
BASEBAND . 
 
Option 4: Connect to the TV through 
SCART
Use the supplied scar t adapter.
  
Connect audio from TV or 
other devices
Use your home theater to play audio from the TV 
or other devices such as a cable box. Choose from 
the following connectors.
Tip
Press  •AUDIO SOURCE  repeatedly to select 
the audio output of your connection.
TV
TV
English
EN
 
						

							10
5 Use your home 
theater
This section helps you use the home theater to 
play media from a wide range of sources.
Before you start
Check that you:
Make the necessar y connections and 
 •complete the setup as described in the 
Quick Star t.
Switch the T V to the correct source for the 
 •home theater.
Choose your sound
This section helps you choose the ideal sound for 
your video or music.
Change treble or bass
Change the high frequency (treble) or low 
frequency (bass) set tings of the home theater to 
suit your video or music.
 
1 Press TREBLE  or BASS .
2 Press  +/- within five seconds to increase 
or decrease treble or bass.
Change sound mode
Select predefined sound modes to suit your 
video or music.
 
Press  SOUND MODE  repeatedly to cycle 
through the available sound modes.
Option 4: Connect audio through an 
HDMI cable
Note
The  •HDMI  connector on the T V might be 
labeled  HDMI 1 or HDMI ARC . This feature 
works with Audio Return Channel (ARC) 
compatible devices only. 
 
Connect a Philips Dock for 
iPod/iPhone
  
Note
Philips iPod Dock is sold separately. •You can use the iPod Dock to charge the iPod  •while the home theater is in iPod mode.
TV
DOCK for iP od
EN
 
						

							11
3 Press the following but tons to control play:
ButtonAction
Navigation 
buttons Navigate menus.
OK Confirms an entr y or selection.
Star ts, pauses or resumes play.
Stops play.
 / Skips to the previous or nex t track, chapter or file.
 / Fast back wards or fast for wards. Press repeatedly to change the 
search speed.
In pause mode, steps back ward 
(DVD only) or for ward by one 
frame.
ZOOM Zooms into a video scene or 
picture.
Use video options
Access several useful features while viewing 
video.
Available video options depend on the video 
source.
ButtonAction
 / Searches slow-back ward or slow-for ward. Press repeatedly to 
change the search speed.
For VCD/SVCD, slow-back ward 
search is not available.
AUDIO 
SYNC Selects an audio language or 
channel.
SUBTITLE Selects subtitle language for video.
 INFODisplays information about what 
is playing.
R E P E AT Repeats a chapter or title.
ANGLE Displays options for different 
camera angles.
Sound modeDescription
ACTION / 
ROCK Enhanced low and high-range. 
Ideal for action movies and rock 
or pop music.
DRAMA  / 
JAZZ Clear mid and high-range. Ideal 
for drama movies and jazz music.
CONCERT  / 
CLASSIC Neutral sound. Ideal for live 
concer ts and classical music.
S PORTS Moderate mid-range and 
surround effects for clear vocals 
and the atmosphere of a live 
spor t venue.
NIGHT Dynamically controlled sound 
mode suitable for watching 
movies at night or for non-
intrusive background music.
Change surround mode
DVS (Dolby Vir tual Speaker) technology 
creates a highly compelling 5.1-channel listening 
experience from as few as two speakers.
  
During play, press SURROUND  to switch on or 
off the surround sound effect. 
Play a disc
The home theater can play a wide variety of 
discs, including video, audio and mixed media (for 
example, a CD-R that contains JPEG pictures and 
MP3 music).
1  Inser t a disc into the home theater.
2 Press DISC .
The disc plays or the disc main menu 
 » appears.
English
EN
 
						

							12
More play features for disc or 
USB
Several advanced features are available for video 
or picture playback from a disc or USB storage 
device.
Play a musical slideshow
Play music and pictures simultaneously to create 
a musical slideshow. The files must be stored on 
the same disc or USB storage device.
1 Select a music track, then press OK .
2 Press  BACK and go to the picture 
f o l d e r.
3  Select a picture, then press OK  to star t 
slideshow.
4  Press  to stop slideshow.
5 Press  again to stop music.
Synchronize audio with video
If the audio and video are not synchronized, you 
can delay the audio to match the video.
1 Press and hold AUDIO SYNC  until the 
audio sync message appears on the display 
panel.
2  Press +/- within five seconds to sync the 
audio with your video.
Quick skip play to a specific time
Quick skip to a specific par t of a video by 
entering the time of a scene.
1  During video play, press  INFO.
2 Press the Navigation buttons and OK  to 
select:
• [TT Time] : Title time.
• [Ch Time] : Chapter time.
• [Disc Time]  : Disc time.
• [Track Time] : Track time.
3 Enter the time of the scene, then press OK .
Use picture options
Access several useful features while viewing 
pictures.
ButtonAction
 / Rotates the picture counter-clock wise or clock wise.
 / Skips to the previous or nex t picture.
R E P E AT Repeats a single file in the folder or 
repeats the entire folder. 
Shuffles files in a folder.
 INFODisplays photo albums in a 
thumbnail over view.
Use audio options
Access several useful features while audio is 
played.
ButtonAction
R E P E AT Repeats a track, the entire disc 
or shuffle tracks.
Play from a USB storage device
The home theater is fitted with a USB connector 
that allows you to view pictures, listen to music or 
watch movies stored on a USB storage device.
1 Connect the USB storage device to the home theater.
2 Press USB .
A content browser appears.
 »
3  Select a file, then press OK .
4 Press the playback but tons to control play 
(see ‘Play a disc’ on page  11 ).
Note
If the USB storage device does not fit into the  •connector, use a USB ex tension cable.
The home theater does not suppor t digital  •cameras that need a computer program to 
display photos.
The USB storage device must be FAT or DOS -
 •format ted, and Mass Storage Class compliant.
EN
 
						

							13
Note
The home theater can store up to 40 radio  •stations.
Press  • to stop the installation.AM and digital radio are not suppor ted. •If no stereo signal is detected, or if fewer than  •five stations are found, you are prompted to 
install the radio stations again.
For the best reception, place the antenna away 
 •from the T V or other sources of radiation.
Play audio from TV or other 
devices
Press AUDIO SOURCE  repeatedly to select 
the audio output of the  connected device (see 
‘Connect audio from T V or other devices’ on 
page  9). 
Play from an MP3 player
Connect and play audio files from an MP3 player 
or other external audio devices.
1  Connect the MP3 player to the home theater. 
2 Press AUDIO SOURCE  repeatedly until 
‘ MP3 LINK ’ appears on the display panel.
3 Press the but tons on the MP3 player to select and play audio files.
Repeat play a specific section
Select sections of audio or video for repeat 
playback.
1 During playback, press  INFO.
2 Select [Repeat]  > [Repeat AB]  in the menu.
3 Press OK  to mark the star t point.
4 Press OK  again to mark the end point.
Repeat play star ts.
 »
To cancel repeat A-B, press 
•  INFO, 
select  [Repeat]  > [Of f ], then press 
OK .
Note
Repeat play is only possible within a track / •chapter.
Play from radio
1 Check that the FM antenna is connected.
2 Press RADIO .
“
 » AUTO INSTALL...PRESS PLAY’ appears 
on the display panel if you have not 
installed any radio stations. Press 
.
3  Press the following but tons to control play:
ButtonAction
 / Selects a preset radio station.
 / Searches for a radio station.
Fine tunes a radio frequency.
Press and hold to erase the preset radio station.
PROGRAM Manual: Press once to access 
program mode, press 
 /  to assign a number to the radio 
station, then press again to store 
the radio station.
Automatic: Press and hold for 
three seconds to reinstall radio 
stations.
English
EN
 
						

							14
Use Philips EasyLink
The home theater suppor ts Philips EasyLink, 
which uses the HDMI CEC (Consumer 
Electronics Control) protocol. EasyLink-
compliant devices that are connected through 
HDMI connectors can be controlled by a single 
remote control. 
Note
Philips does not guarantee 10 0%  •interoperability with all HDMI CEC devices.
1 Switch on the HDMI CEC operations on the T V and other connected devices. See 
the manual of the T V or other devices for 
details. 
2 Press  SETUP .
3 Select [General Setup] , then press OK.
4 Select [EasyLink Setup] , then press OK.
5 Select and adjust the following set tings: 
• [EasyLink]  : Enables or disables EasyLink.
• [One Touch Play] : Enables or disables 
One Touch Play.
If enabled, you can use the remote 
control to star t disc play in the 
home theater and the T V switches 
automatically to the correct channel.
• [One Touch Standby]  : Enables or 
disables One Touch Standby.
If enabled, the home theater can 
be switched off to standby by a 
remote control from the T V or other 
connected HDMI CEC devices.
• [System Audio Control]  :Enables or 
disables System audio control.
If enabled, follow the instructions on 
the T V to map the connected devices 
correctly to the audio connectors of 
the home theater. The home theater 
switches automatically to the audio 
source of the connected device.
• [Audio Input Mapping] : Updates audio 
input mapping if there are new devices 
connected. 
6  Press OK  to confirm your choice. 
Note
The connected devices must be connected  •through HDMI and switched on.
Play from an iPod or iPhone
By connecting and installing a Philips Dock for iPod/
iPhone, you can use the home theater to play music, 
movies and photos from your iPod or iPhone.
Note
Philips Dock for iPod/iPhone is sold separately. •You can charge your iPod/iPhone on the dock  •while the home theater is in iPod mode.
Dock your iPod or iPhone
1 Connect the dock to the home theater and connect the yellow composite cable from 
the dock to the T V. For more information, 
see the Quick Star t provided with the dock.
2 Switch on the iPod or iPhone and place it in the dock.
Listen to music
1 Dock your iPod or iPhone (see ‘Dock your iPod or iPhone’ on page 14).
2 Press DOCK for iPod on the home theater 
remote control. 
3  Browse on the iPod or iPhone screen to select track.
4 Press OK  to play the track.
Watch video or view slideshows
Note
On iPod, enable the T V ON set ting. •On iPhone, select the T V Out option. •
1 Dock your iPod or iPhone (see ‘Dock your iPod or iPhone’ on page 14).
2 Press DOCK for iPod on the home theater 
remote control.
3  Switch the T V to the AV/ V I D E O  source 
(corresponding to the yellow composite 
cable).
The TV screen goes blank.
 »
4 Browse on the iPod or iPhone screen to select videos or photos.
5 Press OK  on the home theater remote 
control or P L AY  on the iPod/iPhone to play 
the video or photos.
The  picture is displayed on the TV.
 »
EN
 
						

							15
Change general settings
1 Press  SETUP .
2 Select [General Setup] , then press OK.
3 Select and adjust the following set tings:
• [EasyLink Setup]  : Sets up EasyLink to 
enjoy easy controls of all the HDMI 
CEC compliant devices using a single 
remote  control (see ‘Use Philips 
EasyLink ’ on page  14 ).
• [Disc Lock]  : Restricts play to disc. 
Password (PIN code) is required to 
unlock the disc before play.
• [Display Dim] : Changes the brightness 
of the display panel.
• [OSD Language]  : Selects the on-
screen display menu language.
• [Screen Saver] : Enables or disables 
screen saver mode. If enabled, the 
screen enters idle mode af ter 10 
minutes of inactivity (for example, in 
pause or stop mode).
• [Sleep Timer] : Sets a sleep timer to 
switch the home theater to standby 
af ter a specific time.
• [DivX® VOD Code]  : Displays the 
DivX VOD registration code for the 
home theater.
4  Press OK  to confirm your choice.
Note
Before you purchase DivX videos and play  •them on the home theater, register the home 
theater on w w w.div x.com using the DivX 
VOD code.
6  Change settings
This section helps you to change the settings of 
your home theater. 
Caution
Most of the set tings are already configured  •with the best value for the home theater. 
Unless you have a specific reason to change a 
set ting, it is best to leave it at the default value.
Access the setup menu
1 Press  SETUP .
The following menu appears.
 »
SymbolDescription
 
[General Setup]
 
[Audio Setup]
 
[Video Setup]
 
[Preference Setup]
2  Select a setup menu, then press OK .
See the following sections for information 
about how to change the set tings of your 
home theater.
3  Press  BACK to return to the previous 
menu, or press  SETUP  to exit.
Note
You cannot change a set ting that is grayed out. •
English
EN
 
						

							16
Change preference settings
1 Press  SETUP .
2 Select [Preference Setup] , then press OK.
3 Select and adjust the following set tings:
• [Audio]  : Selects audio language for 
video.
• [Subtitle]  : Selects subtitle language for 
video.
• [Disc Menu]  : Selects menu language 
for video disc.
• [Parental]  : Restricts access to discs 
that are recorded with ratings. To 
play all discs irrespective of the rating, 
select level ‘8’.
• [PBC]  : Displays or skips the content 
menu for VCD and SVCD discs.
• [MP3/JPEG Display] : Displays the 
MP3/JPEG folders or all the files.
• [Password]  : Sets or changes a PIN 
code to play a restricted disc. Enter 
‘ 0000 ’ if you do not have a PIN or if 
you have forgot ten your PIN.
• [DivX Subtitle]  : Selects a character 
set that suppor ts the DivX subtitle.
• [Version Info.] : Displays the sof tware 
version for the home theater.
• [Default]  : Resets the home theater to 
the default set tings programmed at the 
fac tor y.
4  Press OK  to confirm your choice.
Note
If you select a language that is not available  •on a disc, the home theater uses the default 
language of the disc.
You cannot reset disc lock , password (PIN 
 •code) and parental control set tings to their 
default values.
Change audio settings
1 Press  SETUP . 
2 Select [Audio Setup] , then press OK. 
3 Select and adjust the following set ting: 
[HDMI Audio]  : Enables or disables HDMI 
audio output for the T V.For set tings related 
to HDMI, the T V must be connected 
through HDMI.
4  Press OK  to confirm your choice. 
Change video settings
1 Press  SETUP .
2 Select [Video Setup] , then press OK.
3 Select and adjust the following set tings:
• [TV System]  : Selects a T V system that 
is compatible with the T V.
• [TV Display]  : Selects a picture display 
format to fit the T V screen.
• [Picture Settings]  : Selects a 
predefined color set ting.
• [HDMI Setup] : Selects HDMI video 
resolution and the wide screen display 
format for the T V. The Wide Screen 
Display option is only available for 16:9 
wide screen T V display set ting.
• [Progressive]  : Enables or disables 
progressive scan mode.
4  Press OK  to confirm your choice.
Note
The best set ting is automatically selected for  •the T V. If you need to change the set ting, 
ensure that the T V suppor ts the new set ting.
Some video set tings depend on the video 
 •source, ensure that the disc and the T V 
suppor t the set ting or feature.
For set tings related to HDMI, the T V must be 
 •connected through HDMI.
For set tings related to progressive scan  •mode, the T V must be connected through 
Component Video.
EN
 
						

							17
8 Product specifications
Note
Specification and design are subject to change  •without notice.
Region code
For information about which region this home 
theater suppor ts, see the type plate on the back 
or bottom.
  
Playback media
DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R 
DL, CD-R/CD-RW, Audio CD, Video CD/SVCD, 
Picture CD, MP3-CD, WMA-CD, DivX-CD, USB 
storage device
File Format
Audio: .mp3, .wma
 •Video: .avi, .div x, .wmv
 •Picture: .jpg
 •
Count ry DVD
Europe , Unit ed Ki ngdom
 Latin Amer ica
 Aust ralia , Ne w Ze aland 
 Russia , India
 China
Asia Pacific, Taiwan, Ko rea
7  Update software
To check for new updates, compare the current 
software version of your home theater with the 
latest software version (if available) on the Philips 
web site.
Check software version
1 Press  SETUP .
2 Select [Preference Setup] > [Version Info.] , 
then press  OK.
The software version is displayed.
 »
Update software from a CD-R 
or USB
1  Check for the latest sof tware version on www.philips.com/suppor t.
Search for your model and click on 
• ‘software&drivers’.
2 Download the sof tware onto a CD-R or USB storage device.
3 Inser t the CD-R or connect the USB storage device to the home theater.
4 Follow the instructions on the T V to confirm the update.
When complete, the home theater 
 »automatically switches off and on again.
If not, disconnect the power cord for a 
• few seconds and then reconnect it.
Caution
Do not turn off the power or remove the  •CD-R or USB storage device when the 
sof tware update is in progress because you 
might damage the home theater.
English
EN
 
						

							18
Main Unit
Power supply: 27 Vdc; 2. 5 A (Ex ternal  •switching power adapter)
Power consumption: 35 W
 •
Standby power consumption: < 1 W
 •Impedance: 8 ohm woofer, 8 ohm tweeter
 •Speaker drivers: 3” woofer, 1. 5” tweeter
 •Frequency response: 150 Hz ~ 20 kHz
 •Dimensions ( WxHxD): 790.6 x 145 x 57.4 
 •(m m)
Weight: 2.23 kg
 •
Switching power adapter (G721DA-270250)
Input: 100 -240 Vac; 50 -60 Hz; 1.35 A
 •Output: 27 Vdc; 2. 5 A
 •
SubwooferPower supply: 220 -240 V; ~50 Hz
 •Power consumption: 45 W
 •Standby power consumption: < 1 W
 •System: Bass Reflex System
 •Impedance: 8 ohm
 •Speaker driver : 6” woofer
 •Frequency response: 35 Hz ~ 200 Hz
 •Dimensions ( WxHxD): 182 x 365 x 306 
 •(m m)
Weight: 6 kg
 •
Wall Mount
Dimensions ( WxHxD): 440 x 60 x 23 (mm)
 •Weight: 0. 54 kg
 •
Laser specificationType: Semiconductor laser GaAIAs (CD)
 •Wave leng th: 645 - 665 nm (DVD), 770 - 
 •800 nm (CD)
Output power : 6 mW (DVD), 7 mW 
 •(VCD/CD)
Beam divergence: 60 degrees.
 •
Amplifier
Total output power : 400 W RMS 
 •Frequency response: 20 Hz-20 kHz / ±3dB
 •Signal-to-noise ratio: > 65 dB (CCIR) / 
 •(A-weighted)
Input sensitivity:
 •
AUX: 2 V
• 
MP3 LINK: 1 V• 
VideoSignal system: PAL / NTSC
 •Component video output: 480i/576i, 
 •480p/576p, 720p, 1080i
HDMI output 480p, 576p, 720p, 1080i, 
 •1080 p
Audio S/PDIF Digital audio input:
 • Coaxial: IEC 60958-3
• 
Optical: TOSLINK• 
Sampling frequency: •MP3: 32 kHz, 44.1 kHz, 48 kHz
• 
WMA: 44.1 kHz, 48 kHz• 
Constant bit rate: •MP3: 112 kbps - 320 kbps
• 
WMA: 48 kbps - 192 kbps• 
RadioTuning range: FM 87. 5-108 MHz (50 kHz)
 •Signal-to-noise ratio: FM 50 dB
 •Frequency response: FM 180 Hz-10 kHz / 
 •±6dB
USB Compatibility: Hi-Speed USB (2.0)
 •Class suppor t: UMS (USB Mass Storage 
 •C l a s s)
File system: FAT12, FAT16, FAT32
 •
Maximum memor y suppor t: < 160GB
 •
EN