Philips Hts3580 User Manual

							10
Sound experienceDescription
SOUNDSelects a sound mode.
SURROUNDSelects a surround sound or stereo sound.
TREBLEAdjusts the high frequency output.
MIDAdjusts the middle frequency output.
BASSAdjusts the low frequency output.
AUDIO SYNCDelays the audio to match the video.
3 Select an option, then press OK.
4 Press  (Back) to exit.
If you do not press a but ton within five seconds, it automatically exits the menu.
Change sound mode
Select predefined sound modes to suit your video or music.
1 Press  (Sound options).
2 Select SOUND, then press OK.
3 Press the Navigation buttons (up/down) to select the following set tings:
• ACTION/ROCK : Enhanced low and high-range. Ideal for action movies and rock or pop music.
• DR AMA/JA ZZ : Clear mid and high-range. Ideal for drama movies and jazz music. 
• CONCERT/CL ASSIC: Neutral sound. Ideal for live concer ts and classical music.
• SPORTS : Moderate mid-range and surround effects for clear vocals and the atmosphere of a live spor t venue.
4 Press OK to confirm your choice.
Change surround sound mode
Experience an immersive audio experience with surround sound modes.
1 Press  (Sound options).
2 Select SURROUND, then press OK.
5  Use your home 
theater
This section helps you use the home theater to play media from a wide range of sources.
Before you start
Check that you:
 •Make the necessar y connections and complete the setup as described in the Quick Star t.
 •Switch the T V to the correct source for the home theater.
Access the home menu
The home menu gives you easy access to connected devices, audio and video set tings, and other features.
1 Press  (Home).
 »The home menu appears.
2 Press the Navigation buttons and OK to select the following:
• [play Disc] : Star ts disc play.
• [browse USB] : Accesses the content browser of the connected USB storage device.
• [Setup] : Accesses menus to change picture, sound and other set tings.
Choose your sound
This section helps you choose the ideal sound for your video or music.
  
1 Press  (Sound options).
2 Press the Navigation buttons (lef t /right) to access the sound options. 
EN
 
						

							11
Play a disc
The home theater can play a wide variety of discs, including video, audio and mixed media (for example, a CD-R that contains JPEG pictures and MP3 music).
1 Inser t a disc into the home theater.
2 Press DISC, or select [play Disc] in the home menu and press OK.
 »The disc plays or the disc main menu appears.
3 Press the following but tons to control play:
ButtonAction
Navigation buttonsNavigate menus.
OKConfirms an entr y or selection.
(Play)Star ts or resumes play.
Pauses play.
Stops play.
 / Skips to the previous or nex t track, chapter or file.
 / Fast back wards or fast for wards. Press repeatedly to change the search speed.
Navigation buttons (up/down)
Rotates the picture counter-clock wise or clock wise.
SUBTITLESelects subtitle language for video.
DISCAccesses or exits the disc menu.
 (Options)Accesses more play options during playback.
3 Press the Navigation buttons (up/down) to select the following set tings:
• 5CH STEREO : Enhances the stereo channel output by duplicating the sound output to the center and rear speakers. Ideal for par ty music.
• MULTI-CHANNEL /Dolby PLII : Immersive multi-channel sound for an enhanced movie experience.
• STEREO : Two-channel stereo sound. Ideal for listening to music.
4 Press OK to confirm your choice.
Change treble, mid and bass
Change the high frequency (treble), mid frequency (mid) and low frequency (bass) set tings of the home theater to suit your video or music.
1 Press  (Sound options).
2 Select TREBLE, MID or BASS, then press OK.
3 Press the Navigation buttons (up/down) to adjust the frequency level.
4 Press OK to confirm.
Synchronize audio with video
If the audio and video are not synchronized, you can delay the audio to match the video.
1 Press  (Sound options).
2 Select AUDIO SYNC, then press OK.
3 Press the Navigation buttons (up/down) to sync the audio with the video.
4 Press OK to confirm.
Note
 •Audio Lip Sync is only available when you play a video.
E n g l i s h
EN
 
						

							12
Note
 •The range of BD-Live ser vices depends on the disc. •When you use BD-Live, data on the disc and home theater are accessed by the content provider. •Use a USB storage device with at least 1GB of free space to store the downloaded files. •If there is insuf ficient memor y to download BD-Live content, clear memor y space.
Play 3D video
Your home theater can play 3D videos on 3D TVs.
Before you start, make sure that: 
 •your T V is a 3D T V, and is connected to your home theater through HDMI,
 •your disc is a Blu-ray 3D disc, and
 •you have 3D glasses that are compatible with your 3D T V.
To play 3D video
1 Inser t a Blu-ray 3D disc into your home theater.
 »Your TV switches to the correct HDMI source, and the disc plays automatically.
2 If the disc does not play automatically, press DISC or select [play Disc] in the home menu, and then press OK.
3 Press the play but tons to control play.
When you search for ward or back ward, and in some other play modes, the video displays in 2D. It returns to 3D when you play normally again.
4 Put on the 3D glasses to enjoy the 3D effects.
Play 3D discs in 2D
1 Press  (Home).
2 Select [Setup] > [Video] > [Blu-ray 3D video] > [Off ].
3 Press OK.
4 Play your Blu-ray 3D disc.
 »The 3D video is displayed in 2D.
Use Bonus View on Blu-ray
Blu-ray discs that suppor t the Bonus View feature (also known as Picture-In-Picture) allow you to view special content such as a director’s commentar y while watching the main feature.
1 If necessar y, enable BonusView (or Picture-In-Picture) in the Blu-ray disc menu.
2 During playback of the main feature, press  (Options).
 »The options menu is displayed.
3 Select [PIP Selection] > [PIP], then press OK.
 »PIP options [1]/[2] depend on the video contents.
 »The picture-in-picture video appears in a small window. 
4 Select [2nd Audio Language] or [2nd Subtitle Language], then press OK.
5 Select the language to play, then press OK.
Note
 •To turn off the Bonus View (Picture-in-Picture), press  (Options), select [PIP Selection] > [Off ], then press OK.
Access BD-Live on Blu-ray
BD-Live enabled Blu-ray discs include exclusive ser vices such as movies and other online bonuses.
1 Prepare the internet connection and set up the network (see ‘Connect to the internet’ on page 9).
2 Connect the USB storage device to the home theater.
3 Select the BD-Live icon in the disc menu, then press OK.
 »BD-Live star ts to load. The loading time depends on the disc and your internet connection.
4 Press the Navigation buttons to navigate BD-Live.
5 Press OK to select an item.
EN
 
						

							13
• [Info] : Displays information about what is playing.
• [Character Set] : Selects a character set that suppor ts the DivX subtitle.
• [Time Search] : Skips to a specific par t of the video by entering the time of the scene.
• [2nd Audio Language] : Selects the second audio language to play.
• [2nd Subtitle Language] : Selects the second subtitle language to play.
• [Titles] : Selects a specific title.
• [Chapters] : Selects a specific chapter.
• [Angle List] : Selects a different camera angle.
• [Menus] : Displays the disc menu.
• [PIP Selection] : Displays Picture-in-Picture window.
• [Zoom] : Zooms into a video scene or picture. Press the Navigation buttons (lef t /right) to select a zoom factor.
• [Repeat] : Repeats a chapter or title.
• [Repeat A-B] : Marks two points within a chapter or track for repeat play, or turns off repeat mode.
• [Picture Settings] : Selects a predefined color set ting.
Use picture options
Access several useful features while viewing pictures.
1 Press  (Options).
 »The pictures options menu appears.
2 Press the Navigation buttons and OK to select and adjust:
• [Rotate +90] : Rotates the picture 90 degree clock wise.
• [Rotate -90] : Rotates the picture 90 degree counter-clock wise.
• [Zoom] : Zooms into a video scene or picture. Press the Navigation buttons (lef t /right) to select a zoom factor.
• [Info] : Displays picture information.
• [Duration per slide] : Sets the display speed for each picture in a slide show.
• [Slide Animation] : Selects animation for the slide show.
• [Picture Settings] : Selects a predefined color set ting.
• [Repeat] : Repeats a selected folder.
Play from a USB storage device
The home theater is fitted with a USB connector that allows you to view pictures, listen to music or watch movies stored on a USB storage device.
1 Connect the USB storage device to the home theater.
2 Press  (Home).
 »The home menu appears.
3 Select [browse USB], then press OK.
 »A content browser appears.
4 Select a file, then press OK.
5 Press the playback but tons to control play (see ‘Play a disc’ on page 11).
Note
 •If the USB storage device does not fit into the connector, use a USB ex tension cable. •The home theater does not suppor t digital cameras that need a computer program to display photos. •The USB storage device must be Mass Storage Class compliant, and format ted to FAT, DOS or NTFS file system.
More play features for disc or USB
Several advanced features are available for video or picture playback from a disc or USB storage device.
Use video options
Access several useful features while viewing video.
Note
 •Available video options depend on the video source.
1 Press  (Options).
 »The video options menu appears.
2 Press the Navigation buttons and OK to select and adjust:
• [Audio Language] : Selects audio language for video.
• [Subtitle Language] : Selects subtitle language for video.
• [Subtitle Shift] : Adjusts the subtitle position on the screen.
E n g l i s h
EN
 
						

							14
Play from radio
The home theater can store up to 40 radio stations.
1 Check that the FM antenna is connected.
2 Press R ADIO.
 »“AUTO INSTALL...PRESS PLAY’ appears on the display panel if you have not installed any radio stations. Press (Play).
3 Press the following but tons to control play:
ButtonAction
 / Selects a preset radio station.
Navigation buttons (lef t /right)
Searches for a radio station.
Navigation buttons (up/down)
Fine tunes a radio frequency.
Press and hold to erase the preset radio station.Press to stop the installation of radio stations.
 (Options)Manual: Press once to access program mode, and press again to store the radio station.Automatic: Press and hold for five seconds to reinstall radio stations.
AUDIOToggles between stereo and mono sound.
Note
 •AM and digital radio are not suppor ted. •If no stereo signal is detected, or if fewer than five stations are found, you are prompted to install the radio stations again. •For the best reception, place the antenna away from the T V or other sources of radiation.
Use audio options
Access several useful features while audio is played.
1 Press  (Options) repeatedly to cycle through the following functions:
• REPEAT TR ACK : Repeats the current track.
• REPEAT DISC : Repeats all the tracks on the disc or folder.
• REPEAT R ANDOM : Plays audio tracks in random order.
• REPEAT OFF : Turns off repeat mode.
Play a musical slideshow
Play music and pictures simultaneously to create a musical slideshow.
1 Select a music track, then press OK.
2 Press  (Back) and go to the picture folder.
3 Select a picture, then press OK to star t slideshow.
4 Press  to stop slideshow.
5 Press  again to stop music.
EN
 
						

							15
Use Philips EasyLink
The home theater suppor ts Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. 
Note
 •Philips does not guarantee 10 0% interoperability with all HDMI CEC devices.
1 Switch on the HDMI CEC operations on the T V and other connected devices. See the manual of the T V or other devices for details. 
2 Press  (Home).
3 Select [Setup], then press OK.
4 Select [EasyLink] > [EasyLink], then press OK.
5 Select [On], then press OK.
6 You can now enjoy the following Philips EasyLink controls. 
One-touch playWhen you play a disc, the T V automatically switches to the correct channel.
One-touch standbyWhen you press and hold  (Standby) on the remote control, the home theater and all the connected HDMI CEC devices (if they suppor t one-touch standby) switch to standby mode simultaneously.
System Audio ControlWhen you play a device that has its audio output routed to the home theater, the home theater switches to the corresponding audio source automatically.To use one-touch audio, enable this feature and follow the instructions on the T V to map the connected devices correctly to the audio input jacks of the home theater.
Audio Input MappingUpdates audio input mapping if there are new devices connected.
Play audio from TV or other 
devices
Press AUDIO SOURCE repeatedly to select the audio output of the connected device. 
Play from an MP3 player
Connect and play audio files from an MP3 player or other external audio devices.
1 Connect the MP3 player to the home theater. 
2 Press AUDIO SOURCE repeatedly until ‘MP3 LINK’ appears on the display panel.
3 Press the but tons on the MP3 player to select and play audio files.
E n g l i s h
EN
 
						

							16
• [Picture Settings] : Selects a predefined color set ting.
5 Press OK to confirm your choice.
Note
 •The best set ting is automatically selected for the T V. If you need to change the set ting, ensure that the T V suppor ts the new set ting. •For set tings related to HDMI, the T V must be connected through HDMI.
Change audio settings
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Audio], then press OK. 
4 Select and adjust the following set tings:
• [Night Mode] : Selects quiet or full dynamic sound. Night mode decreases the volume of loud sounds and increases the volume of soft sounds such as speech.
• [HDMI Audio] : Selects HDMI audio format or disables HDMI audio output for the T V.
• [Speaker Setup] : Sets the volume level and distance of each speaker to obtain the best possible surround sound based on your room setup.
5  Press OK to confirm your choice.
Note
 •For set tings related to HDMI, the T V must be connected through HDMI. •Night mode is available for Dolby encoded DVD and Blu-ray discs (for models suppor t Blu-ray playback).
Set up network
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Network], then press OK.
4 Select and adjust the following set tings:
• [Network Installation] : Star ts wired (Ethernet) setup. Follow the instructions to set up the network connection.
6  Change settings
This section helps you to change the settings of your home theater. 
Caution
 •Most of the set tings are already configured with the best value for the home theater. Unless you have a specific reason to change a set ting, it is best to leave it at the default value.
Access the setup menu
1 Press  (Home).
2 Select [Setup], then press OK.
 »The setup menu appears.
3 Select a setup menu, then press OK.
See the following sections for information about how to change the set tings of your home theater.
4 Press  (Back) to return to the previous menu, or press  to exit.
Note
 •You cannot change a set ting that is grayed out.
Change video settings
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Video], then press OK.
4 Select and adjust the following set tings:
• [TV Display] : Selects a picture display format to fit the T V screen.
• [HDMI Video] : Selects the HDMI video resolution.
• [HDMI Deep Color] : Displays colors with more shades and hues when the video content is recorded in Deep Color and the TV suppor ts this feature.
• [Blu-ray 3D video] : Selects the 3-dimensional video output when you play a 3D video on your home theater. The home theater must be connected to a 3D T V through HDMI.
EN
 
						

							17
4 Select and adjust the following set tings:
• [Menu language] : Selects the on-screen display menu language.
• [Audio] : Selects audio language for video.
• [Subtitle] : Selects subtitle language for video.
• [Disc Menu] : Selects menu language for video disc.
• [Parental Control] : Restricts access to discs that are recorded with ratings. To play all discs irrespective of the rating, select level ‘8’.
• [Screen Saver] : Enables or disables screen saver mode. If enabled, the screen enters idle mode af ter 10 minutes of inactivity (for example, in pause or stop mode).
• [Auto Subtitle Shift] : Enables or disables shif t subtitle. If enabled, it adjusts the subtitle position automatically to fit the T V screen.
• [Change Password] : Sets or changes a PIN code to play a restricted disc. Enter ‘0000’ if you do not have a PIN or if you have forgot ten your PIN.
• [Display Panel] : Changes the brightness of the display panel.
• [Auto Standby] : Enables or disables auto standby. If enabled, the home theater switches to standby af ter 30 minutes of inactivity (for example, in pause or stop mode).
• [VCD PBC] : Displays or skips the content menu for VCD and SVCD discs.
• [Sleep Timer] : Sets a sleep timer to switch the home theater to standby af ter a specific time.
5 Press OK to confirm your choice. 
Note
 •If your preferred disc language is not available, you can select [Other] from the list and enter the 4-digit language code which can be found at the back of this manual.  •If you select a language that is not available on a disc, the home theater uses the default language of the disc.
• [View Network Settings] : Displays the current network set tings.
5 Press OK to confirm your choice.
Set up EasyLink
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [EasyLink], then press OK.
4 Select and adjust the following set tings: 
• [EasyLink] : Enables or disables EasyLink.
• [One Touch Play] : Enables or disables One Touch Play.
If enabled, you can use the remote control to star t disc play in the home theater and the T V switches automatically to the correct channel.• [One Touch Standby] : Enables or disables One Touch Standby.
If enabled, the home theater can be switched off to standby by a remote control from the T V or other connected HDMI CEC devices.• [System Audio Control] : Enables or disables System audio control.
If enabled, follow the instructions on the T V to map the connected devices correctly to the audio connectors of the home theater. The home theater switches automatically to the audio source of the connected device.• [Audio Input Mapping] : Updates audio input mapping if there are new devices connected. 
5 Press OK to confirm your choice. 
Note
 •The connected devices must be connected through HDMI and switched on.
Change preference settings
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Preference], then press OK.
E n g l i s h
EN
 
						

							18
7 Update software
To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site.
Check software version
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Advanced] > [Version Info.], then press OK.
 »The software version is displayed.
Update software from the 
network
1 Prepare the internet connection (see ‘Connect to the internet’ on page 9).
2 Press  (Home) and select [Setup].
3 Select [Advanced] > [Software Update] > [Network]. 
 »If an upgrade media is detected, you are prompted to star t or cancel the update. 
4 Follow the instruction on the T V to confirm the update.
 »When complete, the home theater automatically switches off and on again.
• If not, disconnect the power cord for a few seconds and then reconnect it.
Note
 •If the home theater is unable to connect to the Philips ser ver, press  (Home), select [Setup] > [Network] > [Network Installation] to set up the network .
Change advanced settings
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Advanced], then press OK.
4 Select and adjust the following set tings:
• [BD-Live Security] : Restricts or allows access to BD-Live.
• [Enhanced Audio] : Enables or disables the audio post processing at the speaker output.
• [Software Update] : Selects to update sof tware from the network or from USB storage device.
• [Clear memory] : Clears local memor y, delete the BD-Live files that you previously downloaded. If using an USB storage device, the local storage folder is ‘BUDA’.
• [DivX® VOD Code] : Displays the DivX VOD registration code for the home theater.
• [Version Info.] : Displays the sof tware version for the home theater.
• [Restore default settings] : Resets the home theater to the default set tings programmed at the factor y.
5 Press OK to confirm your choice.
Note
 •You cannot restrict internet access on commercial Blu-ray discs.  •Before you purchase DivX videos and play them on the home theater, register the home theater on w w w.div x.com using the DivX VOD code. •You cannot reset parental control set ting to its default value.
EN
 
						

							19
8 Product specifications
Note
 •Specification and design are subject to change without notice.
Region code
The type plate on the back or bottom of the home theater shows which regions it suppor ts
  
Playback media
 •BD-Video, DVD-Video, DVD+R /+RW, DVD-R /-RW, DVD+R /-R DL, CD-R /CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX (Ultra)-CD, USB flash drive.  
File Format
 •Audio: .mp3, .wma
 •Video: .avi, .div x, .mk v, .wmv
 •Picture: .jpg, .gif, .png
Amplifier
 •Total output power: 1000 W RMS (30% THD)
 •Frequency response: 20 Hz-20 kHz / ±3dB
 •Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted)
 •Input sensitivity:
• AUX: 500 mV
• MP3 LINK: 250 mV
Count r y DVD    BD
Europe ,  
Unit ed Ki ngdom
Ko rea
 La tin Amer ica
 Au stra lia ,  
New Ze aland
 Russia , India
 Chin a
AA
AA
CC
CC
Asia Pacific, Taiwan,
Update software from a USB
1 Check for the latest sof tware version on w w w.philips.com/suppor t.
• Search for your model and click on ‘sof tware and drivers’.
2 Create a folder named ‘UPG’ in the root director y of your USB storage device.
3 Download the sof tware into the ‘\UPG’ folder of the USB storage device.
4 Unzip the sof tware in the ‘\UPG’ folder.
5 Connect the USB storage device to the home theater.
6 Press  (Home) and select [Setup].
7 Select [Advanced] > [Software Update] > [USB].
8 Follow the instructions on the T V to confirm the update.
 »When complete, the home theater automatically switches off and restar ts.
• If not, disconnect the power cord for a few seconds and then reconnect it.
Caution
 •Do not turn off the power or remove the USB storage device when the sof tware update is in progress because you might damage the home theater.
E n g l i s h
EN