Philips Hts3568 User Manual

							41
English
Video Setup (underlined options are the factory default settings)
TV Type
 Select the colour system that matches the connected TV. It 
enables playback of a different type of disc (PAL or NTSC disc) 
on this unit.
{ PAL }  –  For PAL-system TV.
{ NTSC }   –  For NTSC-system TV.
{ Multi }   –  For TV that is compatible with both PAL and 
NTSC.
TV Display 
 The picture shape can be adjusted to fi t your TV. 
{ 4:3 Pan Scan }  –  For a full-height 
picture with the 
sides trimmed.
{ 4:3 Letter Box }  –  For a ‘wide-screen’ 
display with black bars 
on the top and bottom.
{ 16:9 Wide Screen }  –  For wide-screen TV 
(frame ratio 16:9). 
Progressive 
 Before enabling the progressive scan feature, you 
must ensure that your TV can accept progressive signals (a 
progressive scan TV is required) and that you have connected this 
unit to your TV using the Y Pb Pr. See ‘Getting Started > Setting up 
Progressive Scan feature’ for details.
{ Off }  –  Turn off the progressive scan mode.
{ On }  –  Turn on progressive scan mode. 
Read the instructions on the TV and confi rm 
your action by pressing OK on the remote 
control.
Picture Setting
 This unit provides three predefi ned sets of picture colour settings 
and one personal setting which you can defi ne yourself.
{ Standard }  –  Original colour setting.  
{  Bright }  –  Vibrant colour setting.
{ Soft }  –  Warm colour setting.
{ Personal }  –  Select this to personalise the picture colour 
setting. Use W X keys to adjust to the setting 
that best suits your personal preference and 
press OK to confi rm. For an average setting, 
select { 0 }.
Setup Menu Options (c o n t i n u e d )
Brightness
Contrast
Tint
ColorPersonal Picture Setup
1_hts3568_12_eng 1_final.indd   411_hts3568_12_eng 1_final.indd   412008-07-03   1:24:49 PM2008-07-03   1:24:49 PM
 
						

							42
EnglishVideo Setup (underlined options are the factory default settings)
Setup Menu Options (c o n t i n u e d )
HDMI Setup
 It provides the picture settings to enhance the appearance and 
picture quality for disc playback. This feature is only applicable if 
you have connected this unit to a HDMI-compatible TV/device.
 { Wide Screen Format } – Select a suitable screen display (this 
option is only available when { TV Display } is set to { 16:9 
Wide Screen }).
{ Superwide }  
Display the 4:3 picture disc on the wide-
screen TV with non-linear stretching (centre 
position of the screen is stretched less than 
the side.)  The supported video resolution 
for this setting is 720p or 1080i.
{ 4:3 Pillar Box }
Display the 4:3 picture disc on the wide-
screen TV without stretching. Black bars will 
be shown on the both sides of the TV screen. 
{ Off }
No aspect ratio adjustment is made when this 
option is selected.
Note:  The { Superwide } is only applicable 
for resolution: 720p or 1080i.
{ HDMI Video } –  Select a suitable video resolution that is 
compatible with your TV display capability.
{ Auto } 
It detects and selects the best supported 
video resolution automatically.
{ 480p, 576p, 720p, 1080i, 1080p }
Manually select a video resolution.  ‘p’ for 
progressive and ‘i’ for interlaced.
 Note:  If no display appears on the TV due to unsupported 
resolution, use the composite video cable to connect this unit 
and your TV. Turn on your TV to the correct input channel for 
the composite video and adjust the resolution setting to 
480p/576p
1_hts3568_12_eng 1_final.indd   421_hts3568_12_eng 1_final.indd   422008-07-03   1:24:50 PM2008-07-03   1:24:50 PM
 
						

							43
English
Video Setup (underlined options are the factory default settings)
Setup Menu Options (c o n t i n u e d )
HDMI Setup
 continues...
{ EasyLink }  –  Enable HDMI CEC compliant TV/devices to 
control each other with a single remote 
control.
Notes:  
–  Your TV and other connected devices must be compliant with HDMI 
CEC.
–  You must turn on the HDMI CEC operations on your TV/devices 
before you can enjoy the EasyLink controls. See your TVs/devices manual 
for details.
–  Philips does not guarantee 100% interoperability with all HDMI CEC 
compliant devices.
{ Auto Wakeup TV } 
Press u button to turn on (both your TV 
and this unit) and start video disc play (if a 
video disc is found in the disc tray). Your TV 
automatically switches to the correct video 
channel.
To disable this feature, select { Off }.
{ System Standby } 
Press STANDBY/POWER button to turn off 
this unit and all the HDMI CEC compliant 
devices.
To disable this feature, select { Decline }.
Note: However, press and hold 2 button 
on this unit remote control can still turn off 
all the HDMI CEC compliant devices.
{ System Audio Control } 
This unit automatically switches to the audio 
input of the active device and output the 
sound from its speakers system.
To enable this feature, select { On }.  Then 
proceed to { HDMI Input Mapping } to 
scan and map all available devices.
{ HDMI Input Mapping } 
Map the correct audio connections from 
your TV/devices to this unit to enable 
seamless switching of audio input 
automatically.  
To start, press OK and confi rm scanning.  
Then select the audio input (e.g. AUX, 
OPTICAL) and map to your TV or other 
devices accordingly.
1_hts3568_12_eng 1_final.indd   431_hts3568_12_eng 1_final.indd   432008-07-03   1:24:50 PM2008-07-03   1:24:50 PM
 
						

							44
EnglishVideo Setup (underlined options are the factory default settings)
Setup Menu Options (c o n t i n u e d )
Component
 Select the video output that matches the video connection 
between this unit and your TV.
{ YUV }  –  For component video (Y Pb Pr) connection.
{ RGB }  –  For scart (TV OUT) connection.
Closed Caption
 This feature is only available if the disc contains of special video
signal data. It shows sound effects on the screen if your TV
supports this feature, such as ‘phone ringing’ and ‘footsteps.’
{ On }  –  Turn on closed caption feature.
{ Off }  –  Turn off closed caption feature.
1_hts3568_12_eng 1_final.indd   441_hts3568_12_eng 1_final.indd   442008-07-03   1:24:50 PM2008-07-03   1:24:50 PM
 
						

							45
English
Preferences (underlined options are the factory default settings)
Audio
 Select the preferred audio language for DVDs with multiple 
sound tracks.  
Subtitle
 Select the preferred subtitle language for DVD playback.
Disc Menu
 Select the preferred disc menu language for DVD playback.
Note:  If the selected audio/subtitle/disc menu language is not available on 
the DVD, the disc’s default language will be used instead.
Parental
 This is to prohibit viewing of discs that had exceeded the limits 
you set. It works only on the DVDs with parental level assigned 
to the complete disc or to certain scenes on the disc. 
1) Use ST keys to select a rating level from 1 to 8 and press 
OK.  
2) Use the numeric keypad 0-9 on the remote control to 
enter your six-digit password.
Notes:  
–  The ratings are country-dependent (‘1’ is considered material that is 
least offensive and ‘8’ is most offensive). To disable parental controls and 
allow all discs to play, select ‘8’.
–  Some DVDs are not encoded with a rating though the movie rating 
may be printed on the disc cover. The rating level feature does not 
prohibit playback of such discs. VCD, SVCD and CD have no level 
indication, so parental control has no effect on these type of discs.
–  DVDs that are rated higher than the level you selected will not be 
played unless you enter the same six-digit password. 
PBC
 Play Back Control feature is applicable for VCD/SVCD only. It 
allows you to play Video CDs (2.0) interactively, following the 
menu on the display.  
{ 
On }   –  The index menu (if available) appears on the TV 
when you load a VCD/SVCD.
{ 
Off }   –  The VCD/SVCD skips the index menu and 
playback directly from the beginning.
Setup Menu Options (continued)
1_hts3568_12_eng 1_final.indd   451_hts3568_12_eng 1_final.indd   452008-07-03   1:24:50 PM2008-07-03   1:24:50 PM
 
						

							46
EnglishPreferences (underlined options are the factory default settings)
MP3/JPEG Nav
 MP3/JPEG Navigator can only be set if the disc is recorded with a 
menu. It allows you to select different display menus for easy 
navigation.
{ Without Menu
 }  –  Display all the fi les contained in the 
MP3/Picture disc.
{ With Menu }   –  Display the folder menu of the MP3/
Picture disc.
Note:  This unit can only display 648 fi les in the directory.
Password
 The password is used for the Disc Lock and Parental. The default 
password is ‘136900’. To change the password:
1) Press OK to access the change password menu.
Old Password
New Password
Confirm PWDChange Password
OK
2) Use the numeric keypad 0-9 on the remote control to 
enter your existing six-digit password at { Old Password }.
Note:  When doing this for the fi rst time or if you forget your existing  
password, key in ‘136900’.
3)  Enter the new six-digit password at { New Password }.
4)  Enter the new six-digit password again at { Confi rm PWD }.
5) Press OK to confi rm and exit the menu.
DivX Subtitle
 Select the font type that supports the recorded DivX® subtitle.
{ Standard }   –  Display a standard list of Roman 
subtitle fonts provided by this unit.
{ Central Europe }  –  Display Central Europe fonts.
{ Cyrillic }  –  Display Cyrillic fonts.
{ Greek }   –  Display Greek subtitle fonts.
{ Hebrew }   –  Display Hebrew subtitle fonts.
{ Chinese (Simp) }  –  Display Simplifi ed Chinese fonts.
{ Korean }   –  Display Korean fonts.
Setup Menu Options (c o n t i n u e d )
1_hts3568_12_eng 1_final.indd   461_hts3568_12_eng 1_final.indd   462008-07-03   1:24:51 PM2008-07-03   1:24:51 PM
 
						

							47
English
Preferences (underlined options are the factory default settings)
Default
 This feature enables you to reset all the setup menu options and 
your personal settings to the factory defaults, except your 
password for the Disc Lock and Parental.  
 Press OK to confi rm the default reset.
Version Info
 This shows you informations about the current version of the 
software installed in this unit. You may require this information 
for future online fi rmware upgrade.
 Press OK to display the software version of this unit.
Setup Menu Options (c o n t i n u e d )
1_hts3568_12_eng 1_final.indd   471_hts3568_12_eng 1_final.indd   472008-07-03   1:24:51 PM2008-07-03   1:24:51 PM
 
						

							48
English
Radio Operations
Before you start .....
Ensure that FM antenna is connected to 
the main unit. (For some models, it has 
been connected in the factory.)  Extend 
the FM antenna and fi x its ends to the 
wall.
Helpful Hints:
–  For better FM stereo reception, connect an 
external FM antenna (not supplied.)
–  Position the antenna as far away as 
possible from your TV, VCR or other 
radiation source to prevent any unwanted 
interference.
Tuning to radio stations
A Press SOURCE repeatedly until ‘FM’ 
appears on the display panel (or press 
RADIO on the remote control).
B Press W / X on the remote control to 
start tuning.

						

							49
English
Radio Operations (c o n t i n u e d )
Using automatic preset
Use automatic presetting to store or 
reinstall all the preset radio stations.
RADIO
REPEAT
PROGRAM
A Press RADIO 
B Press and hold REPEAT (PROGRAM) 
until ‘START ...’ appears on the display 
panel.

						

							50
English
Sound and Volume Controls
SURROUND
(mute) 
VOL+-SOUND
MODES
+-
Volume control
z Press VOL +/- to increase or 
decrease the volume level. 
To turn off the volume temporarily
z Press 
 .