Philips Hts3568 User Manual

51
English
Other Features
Turning on the sleep timer
The sleep timer enables the unit to switch 
to standby mode automatically after the 
selected preset time.
z Press SLEEP repeatedly until it reaches 
the desired preset turn-off time (in 
minutes):  
OFF > 60 > 45 > 30 > 15 > OFF ....
To check or change the setting
z Press SLEEP once to show the 
remaining time before switching off.  
To change the setting, press SLEEP 
repeatedly until the time is displayed.
To cancel the sleep timer
z Press SLEEP...

52
English
Tr o u b l e s h o o t i n g
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Never open the system as there is a risk of electric shock.
If a fault occurs, fi rst check the points listed below before taking the system for repair. 
If you are unable to solve a problem by following these instructions, consult your dealer or
Philips for help.
No picture.
Completely distorted picture 
or black/white picture.
No sound or distorted...

53
EnglishThe remote control does not 
function properly.
The unit does not start 
playback.
The aspect ratio of the screen 
cannot be changed even 
though you have set the TV 
display.
Cannot activate some features 
e.g. Angles, Subtitles, or 
multi-language Audio.
Not able to select some items 
in the setup/system menu.
Unable to play DivX
® movies.
Radio reception is poor.–  Select the source you want to play (for example, 
DISC, USB or RADIO) before pressing the function 
button (u, í / ë).
–  Reduce...

54
English Problem (USB/HDMI)  Solution
Tr o u b l e s h o o t i n g  (c o n t i n u e d )
The contents of the USB fl ash 
drive cannot be read.
Slow operation of the USB 
fl ash drive.
No audio output from HDMI 
connection.
No video output from HDMI 
connection. 
 –  The USB fl ash drive format is not compatible with this 
unit.
–  Drive is formatted with a different fi le system which is 
not supported by this unit (e.g. NTFS).
–  Large fi le size or high memory USB fl ash drive takes 
longer time to...

55
English
AMPLIFIER Total output power:
- Home Theatre mode: 1000 W 
Frequency Response:  180 Hz – 18 kHz / ±3 dB
Signal-to-Noise Ratio: > 60 dB (A-weighted)
Input Sensitivity 
- AUX:  400 mV
- SCART TO TV: 200 mV
- MP3 LINK: 400 mV
RADIO Tuning Range:    FM 87.5–108 MHz (50 kHz)
26 dB Quieting 
Sensitivity:        FM 22 dBf
IF Rejection Ratio:    FM 60 dB
Signal-to-Noise Ratio: FM 50 dB
Harmonic Distortion: FM Mono 3%
            FM Stereo 3%
Frequency Response  FM 180 Hz–10 kHz / ±6 dB
Stereo...

56
English
Glossary
Analogue audio: Sound that has not been 
turned into numbers. Analogue sound is 
available if you use the AUDIO LEFT/RIGHT. 
These red and white sockets send audio 
through two channels, the left and right.
Aspect ratio: Aspect ratio refers to the 
length to height ratio of TV screens. The 
ratio of a standard TV is 4:3, while the ratio 
of a high-defi nition or wide TV is 16:9. The 
letter box allows you to enjoy a picture with 
a wider perspective on a standard 4:3 screen.
AUDIO IN...

57
English
Glossary (c o n t i n u e d )
EasyLink: Philips EasyLink uses the HDMI 
CEC industry standard protocol to share 
functionalities between the unit and its 
connected devices. This feature is only 
available if you connect this unit to a HDMI 
CEC compliant TV with a HDMI cable.  
HDCP (High-bandwidth Digital Content 
Protection) is a specifi cation that provides a 
secure transmission of digital contents 
between different devices (to prevent 
unauthorised copyright).
JPEG: A very common...