Philips Hts3541 User Manual

							9
English
EN
   
 
 
 
 
Option 3: Connect audio through 
analogue audio cables
   
Basic quality audio
1  
 
 
Using an analogue cable, connect the  AUX 
 
connectors on your home theatre to the 
  AUDIO OUT 
 connectors on the TV or other 
device.
   
 
 
  
 
 
 
 
 
 
 
Set up speakers
 
 
 
Manually set up the speakers to experience 
customised surround sound.
   
Before you start
   
Make the necessar y connections described in the 
quick star t guide, and then switch the TV to the 
correct source for your home theatre.
   
 
1  
 
 
Press   
 ( Home 
).
2  
 
Select  [Setup] 
, and then press  OK 
.
3  
 
Select  [Audio] 
 >  [Speaker Setup] 
.
4  
 
Enter the distance for each speaker, and 
then listen to the test tones and change 
the volume. Experiment with the speaker 
positions to fi nd the ideal setting.
 
 
 
 
 
 
 
Set up EasyLink (HDMI-CEC 
control)
   
This home theatre suppor ts Philips EasyLink, 
which uses the HDMI-CEC (Consumer Electronics 
Control) protocol. EasyLink-compliant devices that 
are connected through HDMI can be controlled 
by a single remote control. 
VCR
Note
  • 
Depending on the manufacturer, HDMI-CEC is 
known by many names. For information on your 
device, see the user manual of the device.
  • 
 
Philips does not guarantee 100% interoperability 
with all HDMI-CEC devices. 
  Before you start•  
 
 
Connect your home theatre to the HDMI-CEC 
compliant device through a HDMI connection.
•    
Make the necessar y connections described in 
the quick star t guide, and then switch the TV 
to the correct source for your home theatre.
   
 
 
 
Enable EasyLink
1  
 
 
 
Press   
 ( Home 
).
2  
 
Select  [Setup] 
, and then press  OK 
.
3  
 
Select  [EasyLink] 
 >  [EasyLink] 
 >  [On] 
.
4  
 
On your TV and other connected devices, 
turn on HDMI-CEC control. For details, see 
the user manual of the TV or other devices. 
•    
 
On your TV, set the audio output to 
Amplifi er (instead of TV speaker). For 
details, see the TV user manual.
   
 
 
 
 
 
 
EasyLink controls
 
 
With EasyLink, you can control your home theatre, 
TV and other connected HDMI-CEC compliant 
devices with a single remote control.
•    
 
 
 
[One Touch  Play] 
 (One-touch play): When a 
video disc is in the disc compar tment, press 
 
   ( Play 
) to wake up the TV from standby, and 
then play a disc.
•    
 
[One Touch  Standby] 
 (One-touch standby): 
If one-touch standby is enabled, your home 
theatre can switch to standby with the remote 
control of the TV or other HDMI-CEC devices. 
•    
 
[System Audio  Control] 
 (System audio 
control):If system audio control is enabled, 
the audio of the connected device is 
automatically output through your home 
theatre speakers when you play the device.
•    
 
[Audio Input Mapping] 
 (Audio input 
mapping): If system audio control does not 
work, map the connected device to the 
correct audio input connector on your home 
theatre  
 (see Set up the audio on page   
9  
) .
 
						

							10EN
Note
  •To change the EasyLink control settings, press   
 
( Home 
), select  [Setup] 
 >  [EasyLink] 
.
 
 
 
 
 
Set up the audio
 
 
 
If you cannot hear the audio output of a 
connected device through your home theatre 
speakers, check that you have enabled Easylink on 
all the devices  
 (see Enable EasyLink on page   
8  
) . 
Then, set up the EasyLink audio control.
1    
 
 
Press   
 ( Home 
).
2  
 
Select  [Setup] 
, and then press  OK 
.
3  
 
Select  [EasyLink] 
 >  [System Audio  Control] 
 
>  [On] 
.
•  
 
 
To play the audio from the TV speakers, 
select  [Off] 
 and skip the following steps.
4  
 
 
Select  [EasyLink] 
 >  [Audio Input Mapping] 
.
5  
 
Follow the onscreen instructions to map the 
connected device to the audio inputs on your 
home theatre.
•    
 
If you connect your home theatre to the 
TV through an HDMI ARC connection, 
make sure that the TV audio is mapped 
to the ARC input on your home theatre.
   
 
 
 
 
 
 
 
Connect and set up a home 
network
   
 
Connect your home theatre to a home network 
with Internet access and enjoy:
•    
 
YouTube leanback•  
 
Picasa web albums•  
 
BD-Live applications•  
 
Software update
Caution
  •Familiarise yourself with the network router 
and networking principles. If necessar y, read 
documentation that accompanies the network 
components. Philips is not responsible for lost, 
damaged or corrupt data.
  Before you start•  
 
 
For software updates, make sure that the 
network router has access to the Internet with 
high-speed connection and is not restricted by 
fi rewalls or other security systems.
•  
 
Make the necessar y connections described in 
the quick star t guide, and then switch the TV 
to the correct source for your home theatre.
   
 
 
 
 
Set up the wired network
 
 
What you need•  
 
 
A network cable (RJ45 straight cable).•  
 
A network router (with DHCP enabled).
   
 
 
 
 
 
  
1  
 
 
 
 
Using a network cable, connect the  LAN 
 
connector on your home theatre to the 
network router.
2    
Press   
 ( Home 
).
3  
 
Select  [Setup] 
, and then press  OK 
.
4  
 
Select  [Network] 
 >  [Network Installation] 
 
>  [Wired (Ethernet)] 
.
5  
 
Follow the onscreen instructions to complete 
the setup.
•    
 
If connection fails, select  [Retry] 
, and 
then press  OK 
.
6  
 
 
Select  [Finish] 
, and then press  OK 
 to exit.•  
 
 
To view the network settings, select 
  [Setup] 
 >  [Network] 
 >  [View Network 
Settings] 
.
LAN
www
 
						

							11
English
EN
   
 
 
 
 
 
 
 
 
4  Use your home 
theatre
   
This section helps you use the home theatre to 
play media from a wide range of sources.
   
 
Before you start
•  
 
 
Make the necessar y connections described in 
the Quick star t guide and the user manual.
•    
Switch the TV to the correct source for the 
home theatre.
   
 
 
 
 
Access the home menu
 
 
The home menu provides easy access to 
connected devices, setup and other useful features 
in your home theatre.
1    
 
 
Press   
 ( Home 
).
  » 
 
 
The home menu is displayed.
2  
 
 
Press the  Navigation buttons 
 and  OK 
 to 
select the following:
•    
 
 
[play disc] 
: Star t disc play.•  
 
 
[Browse USB] 
: Access the USB content 
browser
•    
 
[Picasa] 
: Access Picasa web albums.•  
 
 
[YouTube] 
: Access YouTube  Leanback 
page.
•    
 
[Setup] 
: Access menus to change video, 
audio and other settings.
3    
 
Press   
 ( Home 
) to exit.
 
 
 
 
 
 
 
Discs
 
 
Your home theatre can play DVDs, VCDs, CDs 
and Blu-ray discs. It can also play discs that you’ve 
made at home, such as CD-R discs of photos and 
music.
1    
 
 
Inser t a disc into the home theatre.
2  
 
If the disc does not play automatically, press 
  DISC 
 or select  [play Disc] 
 from the home 
menu.
3    
 
Use the remote control to control play  
 (see 
Remote control on page   
4  
) .
•  
 
 
It is normal to hear a slight noise when 
you play a Blu-ray disc. This does not 
mean that your home theatre is faulty.
   
 
 
 
 
 
Play buttons
 
Button  Action 
  Navigation 
buttons Navigate menus.
  OK Confi rm an entr y or selection.
 
   ( Play 
)Star t or resume play.
 
 Pause play.
 
 Stop play.
 
   /   Skip to the previous or next track, 
chapter or fi le.
 
   /   Fast reverse or fast forward. Press 
repeatedly to change the search speed.
  AUDIO  Select an audio language or channel.
  SUBTITLE  Select subtitle language for video.
  DISC 
/ 
  POP-UP 
MENU Access or exit the disc menu.
 
   
 
OPTIONS   Access the advanced options when 
you play your audio, video or media 
fi les  
 (see Audio, video and picture 
options on page   
12  
) .
  REPEAT  Select or turn off repeat mode.
 
 
 
 
 
Synchronise picture and sound
 
 
If the audio and video are not synchronised, delay 
the audio to match the video.
1    
 
 
Press   
 
 SOUND SETTINGS 
.
2  
 
Select  AUD SYNC 
, and then press  OK 
.
3  
 
Press the  Navigation buttons 
 (up/down) to 
synchronise the audio with the video.
4    
Press  OK 
 to confi rm.
 
 
 
 
 
 
 
Bonus View on Blu-ray
 
 
On Blu-ray discs that suppor t the Bonus View, 
enjoy extra content such as commentaries in a 
small screen window. Bonus View is also known as 
picture-in-picture.
1    
 
 
Enable Bonus View in the Blu-ray disc menu.
2  
 
While you play the movie, press  OPTIONS 
.
  » 
 
 
The options menu is displayed.
3  
 
 
Select  [PIP Selection] 
 >  [PIP] 
.•  
 
 
Depending on the video, PIP menu [1] or 
[2] is displayed.
•    
To disable Bonus View, select  [Off] 
.
 
						

							12EN
4  
 
 
Select  [2nd Audio  Language] 
 or  [2nd Subtitle 
Language] 
.
5  
 
Select the language, and then press  OK 
.
 
 
 
 
 
 
 
BD-Live on Blu-ray
 
 
Access additional features on the Blu-ray discs with 
BD-Live content, such as Internet chats with the 
director, the latest movie trailers, games, wallpaper 
and ringtones.
   
BD-Live ser vices and content var y from disc to disc.
   
 
 What you need
•  
 
 
Blu-ray disc with BD-Live content•  
 
a USB storage device, with at least 1 GB of 
memor y
   
 
1  
 
 
 
 
Connect your home theatre to a home 
network with Internet access  
 (see Connect 
and set up a home network on page   
9  
) .
2  
 
Connect a USB storage device to your home 
theatre. 
3    
Press   
 ( Home 
) and select  [Setup] 
.
4  
 
Select  [Advanced] 
 >  [BD-Live Security] 
 > 
  [Off] 
 to enable BD-Live.
•  
 
 
To disable BD-Live, select  [On] 
.
5  
 
 
Select the BD-Live icon in the disc menu, and 
then press  OK 
.
  » 
 
 
BD-Live star ts to load. The loading time 
depends on the disc and your Internet 
connection.
6    
 
Press the  Navigation buttons 
 to navigate BD-
Live, and then press  OK 
 to select an option.
Note
  •To clear the memor y on the storage device, 
press     ( Home 
), select  [Setup] 
 >  [Advanced] 
 
>  [Clear Memory] 
.
 
 
 
 
 
 
Data fi les
 
 
Your home theatre can play pictures, audio and 
video fi les contained in a disc or a USB storage 
device.  Before you play a fi le, check that the fi le 
format is suppor ted by your home theatre  
 (see 
File formats on page   
19  
) .
1  
 
 
 
Play the fi les from a disc or USB storage 
device.
2    
To stop play, press   
.•  
 
 
To resume the video from where you 
stopped, press     ( Play 
).•  
 
To play the video from the star t, press  OK 
.
Note
  •To play DivX DRM protected fi les, connect your 
home theatre to a TV through an HDMI cable.
   
 
 
Subtitles
 
 
If your video has subtitles in multiple languages, 
select a subtitle language.
Note
  • 
Make sure that the subtitle fi le has exactly the 
same name as the video fi le. For example, if the 
video fi le is named movie.avi, name the subtitle 
fi le movie.sr t or movie.sub.
  • 
 
Your home theatre suppor ts the following fi le 
formats: .sr t, .sub, .txt, .ssa, .ass, smi and .sami. If 
the subtitles do not appear correctly, change the 
character set. 
1    
 
While playing video, press  SUBTITLE 
 to 
select a language.
2    
For DivX videos, if the subtitles do not 
appear correctly, continue with the following 
steps to change the character set.
3    
Press  OPTIONS 
.
  » 
 
 
The options menu is displayed.
4  
 
 
Select  [Character Set] 
, and then select a 
character set that suppor ts the subtitles.
   
 
 
 
 
Europe, India and Russia
 
Character 
Set   Language 
  [Standard]  English, Albanian, Danish, Dutch, Finnish, 
French, Gaelic, German, Italian, Kurdish 
(Latin), Norwegian, Por tuguese, Spanish, 
Swedish and Turkish
  [Central 
Europe] Albanian, Croat, Czech, Dutch, English, 
German, Hungarian, Irish, Polish, 
Romanian, Slovak, Slovene and Sorbian
  [Cyrillic]  Bulgarian, Belorussian, English, 
Macedonian, Moldavian, Russian, 
Serbian and Ukrainian
  [Greek] Greek
 
						

							13
English
EN
   
 
 
 
VOD code for DivX
 
 
Before you purchase DivX videos and play them 
on your home theatre, register the home theatre 
on www.divx.com using the DivX VOD code. 
1    
 
 
Press   
 ( Home 
).
2  
 
Select  [Setup] 
, and then press  OK 
.
3  
 
Select  [Advanced] 
 >  [DivX® VOD  Code] 
.
  » 
 
 
The DivX VOD registration code for 
your home theatre is displayed.
   
 
 
 
 
 
 
 
USB storage devices
 
 
Enjoy pictures, audio and video stored on a USB 
storage device such as an MP4 player or digital 
camera.
   
 
What you need
•  
 
 
A USB storage device that is formatted for 
FAT or NTFS fi le systems and complies with 
the Mass Storage Class.
•    
 
A media fi le in one of the suppor ted fi le 
formats  
 (see File formats on page   
19  
) .
Note
  •If you use a USB extension cable, USB HUB or 
USB multi-reader, the USB storage device may 
not be recognised.
1    
 
Connect a USB storage device to the   
 
( USB 
) connector on your home theatre.
2  
 
Press   
 ( Home 
).
3  
 
Select  [browse USB] 
, and then press  OK 
.
  » 
 
 
A content browser is displayed.
4  
 
 
Select a fi le, and then press  OK 
.
5  
 
 
Press the play buttons to control play  
 (see 
Play buttons on page   
10  
) .
 
 
 
 
 
 
 
Audio, video and picture options
 
 
Use advanced features when you play pictures, 
audio and video fi les from a disc or a USB storage 
device.
   
 
 
Audio options
 
 
While playing audio, repeat an audio track, a disc 
or a folder.
1    
 
 
Press  OPTIONS 
 repeatedly to cycle through 
the following functions:
•    
 
 
 
 
 
RPT TRACK 
 /  RPT FILE 
: Repeat the 
current track or fi le.
•  
 
 
RPT DISC 
 /  RPT FOLDER 
: Repeat all 
the tracks on the disc or the folder.
•    
 
RPT RANDOM 
: Play audio tracks in 
random order.
•    
 
RPT OFF 
: Turn off the repeat mode.
 
 
 
 
 
 
 
Video options
 
 
While watching video, select options such as 
subtitles, audio language, time search and picture 
settings. Depending on the video source, some 
options are not available.
1    
 
 
Press  OPTIONS 
.
  » 
 
 
The video options menu is displayed.
2  
 
 
Press the  Navigation buttons 
 and  OK 
 to 
select and change:
•    
 
 
 
 
 
[Audio Language] 
: Select audio language 
for video.
•    
 
[Subtitle Language] 
: Select subtitle 
language for video.
•    
 
[Subtitle Shift] 
: Change the subtitle 
position on the screen.
•    
 
[Info] 
: Display information about what is 
playing.
•    
 
[Character Set] 
: Select a character set 
that suppor ts the DivX subtitle.
•    
 
[Time Search] 
: Skip to a specifi c par t of the 
video by entering the time of the scene.
•    
 
[2nd Audio  Language] 
: Select the second 
audio language for Blu-ray video.
•    
 
[2nd Subtitle Language] 
: Select the second 
subtitle language for Blu-ray video.
•    
 
[Titles] 
: Select a specifi c title.•  
 
 
[Chapters] 
: Select a specifi c chapter.•  
 
 
[Angle List] 
: Select a different camera angle.•  
 
 
[Menus] 
: Display the disc menu.•  
 
 
[PIP Selection] 
: Display Picture-in-Picture 
window when playing a Blu-ray disc that 
suppor ts the Bonus View.
•    
 
[Zoom] 
: Zoom into a video scene or 
picture. Press the  Navigation buttons 
 
(left/right) to select a zoom factor.
•    
 
[Repeat] 
: Repeat a chapter or title.
 
						

							14EN
•  
 
 
[Repeat A-B] 
: Mark two points within a 
chapter or track to repeat play, or turn 
off the repeat mode.
•    
 
[Picture Settings] 
: Select a predefi ned 
colour setting.
   
 
 
 
 
 
Picture options
 
 
While viewing a picture, zoom into the picture, 
rotate it, add animation to a slideshow and change 
the picture settings.
1    
 
 
Press  OPTIONS 
.
  » 
 
 
The picture options menu appears.
2  
 
 
Press the  Navigation buttons 
 and  OK 
 to 
select and change the following settings:
•    
 
 
 
 
 
[Rotate +90] 
: Rotate the picture 90 
degrees clockwise.
•    
 
[Rotate -90] 
: Rotate the picture 90 
degrees anti-clockwise.
•    
 
[Zoom] 
: Zoom into a video scene or 
picture. Press the  Navigation buttons 
 
(left/right) to select a zoom factor.
•    
 
[Info] 
: Display picture information.•  
 
 
[Duration per slide] 
: Select the display 
speed for each picture in a slide show.
•    
 
[Slide Animation] 
: Select animation for 
the slideshow.
•    
 
[Picture Settings] 
: Select a predefi ned 
colour setting.
•    
 
[Repeat] 
: Repeat a selected folder.
 
 
 
 
 
 
 
Musical slideshow
 
 
If the picture and audio fi les are from the same 
disc or USB storage device, you can create a 
musical slideshow.
1    
 
 
Select an audio track, and then press  OK 
.
2  
 
Press   
 
 BACK 
, and go to the picture folder.
3  
 
Select a picture, and then press   
 ( Play 
) to 
star t the slideshow.
4    
Press   
 to stop slideshow.
5  
 
Press   
 again to stop music.
Note
  • 
Make sure that the picture and audio formats 
are suppor ted by your home theatre  
 (see File 
formats on page   
19  
) .
 
 
 
 
 
 
Radio
 
 
Listen to FM radio on your home theatre, and 
store up to 40 radio stations.
Note
  • 
AM and digital radio are not suppor ted.  • 
 
If no stereo signal is detected, or if fewer than 
fi ve stations are found, you are prompted to 
install the radio stations again. 
1    
 
Extend the FM antenna at the back of your 
home theatre and place it away from the TV 
or other sources of radiation.
2    
Press  RADIO 
.
  » 
 
 
If you have already installed the radio 
stations, the last channel that you listened 
to is played.
  » 
 
If you have not installed any radio 
stations, the message  AUTO 
INSTALL...PRESS PLAY 
 appears on 
the display panel. press  
   ( Play 
).
3  
 
 
Use the remote control to listen or to 
change radio stations.
  Button  Action 
   
 
 /   
   
 or
   
 
Alphanumeric 
buttons 
 Select a preset radio station.
  Navigation 
buttons   Left/Right: Search for a radio 
station.
   
Up/Down: Fine tune a radio 
frequency. 
 
 Press to stop the installation of 
radio stations.
 
   
 BACK Press and hold to erase the 
preset radio station.
  OPTIONS  Manual: 
   
1) Press  
 
 
 OPTIONS 
. 2) 
Press     /   
 to select your 
preset. 3) Press     
 OPTIONS 
 
again to store the radio station.
   
Automatic: Press and hold for 
three seconds to reinstall the 
radio stations. 
 
						

							15
English
EN
   
 
 
 
MP3 player
 
 
Connect an MP3 player to play audio fi les.
   
What you need
•  
 
 
An MP3 player.•  
 
A 3.5-mm stereo audio cable.
   
 
 
1  
 
 
 
Using the 3.5 mm stereo audio cable, 
connect the MP3 player to the  MUSIC iLINK 
 
connector on your home theatre. 
2    
Press  AUDIO SOURCE 
 repeatedly until 
  MUSIC I-LINK 
 appears on the display panel.
3  
 
Press the buttons on the MP3 player to select 
and play audio fi les.
 
 
 
 
 
 
 
YouTube videos
 
 
Enjoy YouTube videos through your home theatre.
   
 
1  
 
 
 
 
Connect your home theatre to a home 
network with a high-speed Internet access  
 
(see Connect and set up a home network 
on page   
9  
) .
2  
 
Press   
 ( Home 
).
3  
 
Select  [YouTube] 
, and then press  OK 
.
  » 
 
 
The YouTube Leanback page is displayed.
4  
 
 
Follow the onscreen instructions to browse 
the YouTube  page. 
5    
Use the remote control to select and 
navigate the application.
  Button  Action 
  Navigation 
buttons   Up: Access the onscreen keyboard.
   
Down: Access the onscreen 
playback buttons.
   
Left/Right: Select a video from the 
playlist. 
•    
If you do not press a button within few 
seconds, the onscreen buttons and menu 
exit automatically.
6    
 
Press   
 ( Home 
) to exit the YouTube page.
 
 
 
 
 
 
 
Picasa web albums
 
 
Access Picasa Web Albums through your home 
theatre.
   
What you need
•  
 
 
An account with Picasa Web Albums.
   
 
 
1  
 
 
 
 
Connect your home theatre to a home 
network with Internet access  
 (see Connect 
and set up a home network on page   
9  
) .
2  
 
Press   
 ( Home 
).
3  
 
Select  [Picasa] 
, and then press  OK 
.
4  
 
Log in to your Picasa web account.•  
 
 
The fi rst time you log in, select  [New 
user] 
, and then enter your username and 
password. Save your login information for 
subsequent use.
•    
If you have logged in before, select a 
stored username and enter the password.
5    
 
Select the onscreen options to view the 
albums or photos.
6    
Press   
 ( Home 
) to exit Picasa menu.
 
 
 
 
 
 
View slideshow
1  
 
 
Select  [My photos] 
 from the Picasa menu, 
and then press  OK 
.
  » 
 
 
The photo albums in your Picasa Web 
Albums are displayed.
2    
 
Select a photo, and then press  OK 
 to view 
the photo in full screen. 
3    
Press  OK 
 again to view the photos in a 
slideshow.
4    
While viewing a slideshow, press  OPTIONS 
 
to access more play options.
5    
Press   
 
 BACK 
 to return to the previous 
screen.
   
 
 
 
 
 
Choose sound
 
 
This section helps you choose the ideal sound for 
your video or music.
1    
 
 
Press   
 
 SOUND SETTINGS 
.
2  
 
Press the  Navigation buttons 
 (left/right) to 
access the sound options on the display. 
 
						

							16EN
 
Sound settings  Description 
  SOUND  Select a sound mode.
  SURROUND  Select surround sound or 
stereo sound.
  TREBLE  Change the high frequency 
output.
  MID  Change the middle frequency 
output.
  BASS  Change the low frequency 
output.
  AUD SYNC  Delay the audio to match the 
video.
3   Select an option, and then press  OK 
.
4  
 
Press   
 
 BACK 
 to exit.
   
 
If you do not press a button within a minute, 
the menu exits automatically.
   
 
 
 
Sound mode
 
 
Select predefi ned sound modes to suit your video 
or music.
1    
 
 
Press   
 
 SOUND SETTINGS 
.
2  
 
Select  SOUND 
, and then press  OK 
.
3  
 
Press the  Navigation buttons 
 (up/down) to 
select a setting on the display:
•    
 
 
MOVIE 
: Enjoy a cinematic audio 
experience, specially enhanced for 
movies.
•    
 
MUSIC 
: Recreate the original recording 
environment of your music, in the studio 
or at a concer t.
•    
 
ORIGINAL 
: Experience the original 
sound of your movies and music, without 
added sound effects.
•    
 
NEWS 
: Hear ever y word with optimised 
speech and clear vocals.
•    
 
GAMING 
: Enjoy thrilling arcade sounds, 
ideal for action-packed video games or 
loud par ties.
4    
 
Press  OK 
 to confi rm.
 
 
 
 
 
 
 
Surround sound mode
 
 
Experience an immersive audio experience with 
surround sound modes.
1    
 
 
Press   
 
 SOUND SETTINGS 
.
2  
 
Select  SURROUND 
, and then press  OK 
.
3  
 
Press the  Navigation buttons 
 (up/down) to 
select a setting from your display:
•    
 
 
AUTO 
: Surround sound based on the 
audio stream.
•    
 
5CH STER 
: Enhanced stereo sound. Ideal 
for par ty music.
•    
 
MULTI-CH 
: Immersive multi-channel 
sound for an enhanced movie 
experience.
•    
 
STEREO 
: Two-channel stereo sound. Ideal 
for listening to music.
4    
 
Press  OK 
 to confi rm.
 
 
 
 
 
 
 
Equalizer
 
 
Change the high frequency (treble), mid frequency 
(mid) and low frequency (bass) settings of the 
home theatre.
1    
 
 
Press   
 
 SOUND SETTINGS 
.
2  
 
Select  TREBLE 
,  MID 
 or  BASS 
, and then press 
  OK 
.
3  
 
Press the  Navigation buttons 
 (up/down) to 
change the frequency.
4    
Press  OK 
 to confi rm.
 
						

							17
English
EN
   
 
 
 
 
 
 
 
5 Change settings
 
 
The home theatre settings are already confi gured 
for optimal performance. Unless you have a reason 
to change a setting, we recommend that you keep 
the default setting.
Note
  • 
You cannot change a setting that is greyed out.  • 
 
To return to the previous menu, press   
 
 
BACK 
. To exit the menu, press   
 ( Home 
). 
 
 
 
 
Language settings
1  
 
 
 
Press   
 ( Home 
).
2  
 
Select  [Setup] 
, and then press  OK 
.
3  
 
Select  [Preference] 
, and then press  OK 
.
4  
 
Press the  Navigation buttons 
 and  OK 
 to 
select and change:
•    
 
 
[Menu Language] 
: Select a display 
language for the menu.
•    
 
[Audio] 
: Select an audio language for the 
discs.
•    
 
[Subtitle] 
: Select a subtitle language for 
the discs.
•    
 
[Disc Menu] 
: Select a menu language for 
the discs.
Note
  • 
If your preferred disc language is not available, 
select  [Others] 
 from the list  and enter the 
4-digit language code found at the end of this 
user manual .
  • 
 
If you select a language that is not available on a 
disc, the home theatre uses the default language 
of the disc. 
   
 
 
 
Picture and video settings
1  
 
 
 
Press   
 ( Home 
).
2  
 
Select  [Setup] 
, and then press  OK 
.
3  
 
Select  [Video] 
, and then press  OK 
.
4  
 
Press the  Navigation buttons 
 and  OK 
 to 
select and change:
•    
 
 
[TV Display] 
: Select a picture format to 
fi t the TV screen.
•  
 
 
[HDMI Video] 
: Select the resolution of the 
video signal that is output from  HDMI OUT 
(ARC) 
 on your home theatre. To enjoy the 
selected resolution, make sure that your TV 
suppor ts the selected resolution.
•    
 
[HDMI Deep Color] 
: Recreate the natural 
world on your TV screen by displaying vivid 
images using billions of colours. Your home 
theatre must be connected to a Deep 
Color enabled TV through an HDMI cable.
•    
 
[Picture Settings] 
: Select pre-defi ned 
colour settings for the video display.
•    
 
[Watch 3D video] 
: Set HDMI video to 
suppor t 3D or 2D video. 
Note
  •If you change a setting, make sure that the TV 
suppor ts the new setting.
   
 
 
 
Audio settings
1  
 
 
 
Press   
 ( Home 
).
2  
 
Select  [Setup] 
, and then press  OK 
.
3  
 
Select  [Audio] 
, and then press  OK 
.
4  
 
Press the  Navigation buttons 
 and  OK 
 to 
select and change:
•    
 
 
[Night Mode] 
: For quiet listening, 
decrease the volume of loud sounds on 
your home theatre. Night mode is only 
available for Dolby-encoded DVD and 
Blu-ray discs.
•    
 
[HDMI Audio] 
: Set the HDMI audio 
output from your TV, or disable HDMI 
audio output from the TV.
•    
 
[Default sound settings] 
: Restore the 
equaliser settings of all the sound modes 
to the default values.
   
 
 
 
 
 
 
Parental control settings
1  
 
 
 
Press   
 ( Home 
).
2  
 
Select  [Setup] 
, and then press  OK 
.
 
						

							18EN
3  
 
Select  [Preference] 
, and then press  OK 
.
4  
 
Press the  Navigation buttons 
 and  OK 
 to 
select and change:
•    
 
 
[Change Password] 
: Set or change your 
password for parental control access. 
If you do not have a password or have 
forgotten your password, enter  0000 
.
•  
 
 
[Parental Control] 
: Restrict access to 
discs that are recorded with age ratings. 
To play all discs, irrespective of the ratings, 
select  8 
 or  [Off] 
.
 
 
 
 
 
 
 
 
Display settings
1  
 
 
 
Press   
 ( Home 
).
2  
 
Select  [Setup] 
, and then press  OK 
.
3  
 
Select  [Preference] 
, and then press  OK 
.
4  
 
Press the  Navigation buttons 
 and  OK 
 to 
select and change:
•    
 
 
[Auto Subtitle Shift] 
: Enable or disable 
automatic repositioning of subtitles on 
TVs that suppor t this feature.
•    
 
[Display Panel] 
: Set the brightness of the 
home theatre front panel display.
•    
 
[VCD PBC] 
: Enable or disable the content 
menu navigation of VCD and SVCD discs 
with Play Back Control feature.
   
 
 
 
 
 
 
Energy saving settings
1  
 
 
 
Press   
 ( Home 
).
2  
 
Select  [Setup] 
, and then press  OK 
.
3  
 
Select  [Preference] 
, and then press  OK 
.
4  
 
Press the  Navigation buttons 
 and  OK 
 to 
select and change:
•    
 
 
[Screen Saver] 
: Switch the home theatre 
to screen saver mode after 10 minutes 
of inactivity.
•    
 
[Auto Standby] 
: Switch the home theatre 
to standby after 30 minutes of inactivity. 
This timer only works when a disc or 
USB play is paused or stopped.
•    
 
[Sleep Timer] 
: Set the duration of the sleep 
timer so that the home theatre is switched 
to standby after the specifi ed period.
 
 
 
 
 
 
 
 
Speaker settings
1  
 
 
 
Press   
 ( Home 
).
2  
 
Select  [Setup] 
, and then press  OK 
.
3  
 
Select  [Advanced] 
, and then press  OK 
.
4  
 
Press the  Navigation buttons 
 and  OK 
 to 
select and change:
•    
 
 
[Enhanced Audio] 
: Select  [On] 
 to enable 
audio post processing on the speaker and 
enable karaoke settings (if your product 
suppor ts Karaoke). To play the original 
audio of the disc, select  [Off] 
.
Tip
  • 
Enable audio post processing before you select a 
predefi ned sound mode  
 (see Sound mode on page 
   
15  
) .
 
 
 
 
 
Restore default settings
1  
 
 
 
Press   
 ( Home 
).
2  
 
Select  [Setup] 
, and then press  OK 
.
3  
 
Select  [Advanced] 
 >  [Restore Default 
Settings] 
, and then press  OK 
.
4  
 
Select  [OK] 
, and then press  OK 
 to confi rm.
  » 
 
 
Your home theatre is reset to its default 
settings except for some settings, such 
as parental control and DivX VOD 
registration code.