Philips Hts3531 User Manual

HTS3531
Register your product and get support at
www.philips.com/welcome
   

3
7 Update software 21
Check software version 21
Update software through USB or CD-R 21
8
 Product specifi

cations
 22
9
 T

roubleshooting
 23
10
 Index 25
Contents
1 Notice 4
Copyright 4
Compliance 4
Mains fuse (UK only) 4
Trademarks 4
2
 Impor

tant
 5
Safety 5
Care for your product 5
Care of the environment 6
3
 Your home th

eater
 6
Main unit 6
Remote control 7
4
 Connect your home theater 8
Speakers 8
Connectors 9
Connect  to TV 10
Connect audio from TV and other devices 11
5
 Use your hom

e...

4
Trademarks
  
Manufactured under license from Dolby 
Laboratories. Dolby and the double-D symbol 
are registered trademarks of Dolby Laboratories.
 
DivX , DivX Cer tified  and associated logos are 
registered trademarks of DivX , Inc. and are used 
under license.
ABOUT DIV X VIDEO: DivX® is a digital 
video format created by DivX , Inc. This is an 
official DivX Cer tified® device that plays DivX 
video. Visit div x.com for more information and 
sof tware tools to conver t your files into DivX...

5
• Never place the product or any objects 
on power cords or on other electrical 
equipment.
• If the product is transpor ted in 
temperatures below 5°C , unpack the 
product and wait until its temperature 
matches room temperature before 
connecting it to the power outlet.
• Visible and invisible laser radiation when 
open. Avoid exposure to beam.
• Do not touch the disc optical lens inside the 
disc compar tment.
• Par ts of this product can be made of 
glass. Handle with care to avoid injur y and...

6
3 Your home theater
Congratulations on your purchase, and welcome 
to Philips! To fully benefit from the suppor t that 
Philips offers, register your home theater at www.
philips.com/welcome.
Main unit
 
a Disc compartment
b Display panel
c  (Open/Close)
Open or close the disc compar tment, or 
eject the disc.
d  (Play/Pause)
Star t, pause or resume play.
e SOURCE
Se lect an audio or video source for the 
home theater.
f  (Standby-On)
Switch the home theater on or to standby.
Care of the environment...

7
a  (Standby-On) • Switch the home theater on or to 
s t andby.
• When EasyLink is enabled, press 
and hold for at least three seconds 
to switch all connected HDMI CEC 
compliant devices to standby.
b  (Open/Close) 
Open or close the disc compar tment, or 
eject the disc.
c Source buttons• DISC : Switch to disc source. Access 
or exit the disc menu when you play 
a disc.
• AUDIO SOURCE : Select an audio 
input source.
• RADIO : Switch to FM radio.• USB: Switch to USB storage device.
d Navigation...

8
4 Connect your home 
theater
This section helps you connect your home theater 
to a TV and other devices. 
For information about the basic connections of 
your home theater and accessories, see the quick 
star t guide. For a comprehensive interactive guide, 
see www.connectivityguide.philips.com. 
Note
 •For identification and supply ratings, refer to 
the type plate at the back or bot tom of the 
product.
 •Before you make or change any connections, 
make sure that all devices are disconnected 
from...

9
Setup
Set up your speakers through the speaker setup 
menu.
1 Connect your speakers and subwoofer as 
described in the Quick star t guide.
2 Turn on your T V, and switch to the correct 
source for the home theater.
3 Press  SETUP  on your home theater 
remote control.
4 Select  [Audio Setup] , and then press OK.
5 Change the following set tings, and then 
p
ress OK .
• [Speakers Volume] : Set the volume 
level of each speaker.
• [Speakers Delay] : Set the delay time 
for speakers which are placed...

10
 
2 On your T V, turn on HDMI-CEC . For 
details, see the T V user manual.
 »When you pla

y a disc on your home 
theater, the video is automatically 
displayed on TV and the audio is 
automatically played on the home theater. 
3 To play audio from T V programs through 
y our home theater, connect an additional 
audio cable (see ‘Connect audio from TV 
and other devices’ on page 11). 
4 If audio from the T V does not play 
a utomatically on your home theater, set up 
the audio manually (see ‘Set up...