Philips Hts3455 User Manual

11
English
Remote Control (continued)
13
14
15
16
17
18
20
21
22
23
24
25
19
m SUBTITLE
–  Selects a DVD subtitle language.
n ANGLE
–  Selects a DVD disc camera angle (if
 available).
o DISC MENU
–  For DVD, enter or exit disc contents 
menu.
–  For VCD/SVCD, enter digest menu.
p W X S T
–  DISC: selects movement direction in the 
menu.
–  TUNER: press up or down to tune the 
radio frequency up/down.
–  TUNER: press left or right to start auto 
search.
q OK
– Confi rms a selection.
r RETURN/TITLE
–  For...

12
English
Remote Control (continued)
Using the remote control
A Open the battery compartment.
B Insert two batteries type R03 or AAA,
following the indications (+-) inside
the compartment.
C Close the cover.
D  Point the remote control directly at the 
remote sensor (iR) on the front panel.
E Select the source you wish to control by 
pressing the DISC, TUNER, TV or 
AUX/DI button on the remote control.
F Then select the desired function (for 
example ., >).CAUTION!
–  Remove batteries if they are...

13
English
Step 1:  Placing the speakers
The Philips Home Theatre System is 
simple to install.  However, proper 
system placement is critical to ensure an 
optimum sound experience.
A Place the front left and right speakers at 
equal distances from the TV and at an 
angle of approximately 45 degrees from 
the listening position.
B Place the centre speaker above the TV or 
the DVD system so that the centre 
channel’s sound is localised.
C Place the rear speakers at normal 
listening ear level facing each...

14
English
Step 2:  Connecting the 
speakers to AV subwoofer 
z Connect all the speakers to the speaker 
sockets at the rear of the AV subwoofer.  
Make sure that the colours of the plugs 
and sockets are matched.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected 
from the power outlet.
Basic Connections (continued)
FRONT 
LEFT FRONT 
RIGHT
REAR RIGHT
REAR LEFTCENTER SUBWOOFER
 

15
English
~MAINSHDMI OUT
Step 3:  Connecting the AV 
subwoofer to DVD system
A Use the supplied inter-connect cable to 
connect TO AV SUBWOOFER 
socket at the rear of the DVD system to 
the TO DVD SYSTEM socket at the 
rear of the AV subwoofer.
B Tighten the screws beside the inter-
connect cable to secure the connection.
Step 4:  Connecting the FM/
MW antennas
A Connect the supplied MW loop antenna 
to the MW socket.  Place the MW loop 
antenna on a shelf, or attach it to a stand 
or wall.
B Connect...

16
English
~MAINS
HDMI OUTRL
Basic Connections (continued)
Step 5:  Connecting to TV
This connection enables you to view the 
playback from this DVD system. You only 
need to choose one of the options 
below to make your video connection.
–  For a standard TV, follow option 1 or 
2.
–  For a progressive scan TV, follow 
option 3.
–  For a HDMI TV, follow option 4.
IMPORTANT!
Connect the DVD system directly 
to the TV.
OR
Option 1: Using the Video (CVBS) 
socket (good picture quality)
z  Use the supplied...

17
English
Option 3: Connecting to a 
Progressive Scan TV or component 
video input
The progressive scan video quality is only 
available when using Y Pb Pr connection 
and a progressive scan TV is required. It 
provides superior picture quality when 
watching DVD movies.
A Follow option 1 to make the basic video 
connection. 
B Use the component video cables (red/ 
blue/green - not supplied) to connect the 
Y P
B PR sockets on the DVD system to 
the corresponding component video 
input sockets (or...

18
English
Step 6:  Connecting the 
power cord
After everything is connected 
properly, plug the AC power cord 
into the power outlet.
The Eco Power LED on the DVD system 
and the AV subwoofer will light up. 
Never make or change any connections 
with the power turned on.
Helpful Hint:
–  Refer to the type plate at the rear or 
bottom of the product for identifi cation and 
supply ratings.
~MAINS
HDMI OUTRL
Basic Connections (continued)
TIPS: Before making or changing any connections, make sure that all...

19
English
Optional Connections
Connecting audio from TV 
When connecting the audio output from 
your TV to this Home Theater Audio 
System, you will have the sound of the 
TV output on all the speakers.  It will 
enable you to enjoy the multi-channel 
surround sound capabilities.
z  Use an audio cable (red/white - not 
supplied) to connect the TV IN jacks on 
this DVD system to the AUDIO OUT 
sockets on the TV.
To listen to the sound, press TV on the 
remote control as the sound source that 
you want to...

20
EnglishStep 1:   Turning on the DVD 
system
A Press STANDBY ON (2).
B
 Press the SOURCE button on the front 
panel repeatedly to select :
   DISC ¤ FM ¤ MW ¤ TV ¤ AUX 
  ¤ DISC .... 
Or
z Press DISC, TUNER, TV or AUX/DI 
on the remote control.